Supply, Instln, Comm.-LNG Stns

TROLLEY,UNLOADING HOSE — TROLLEY; TYPE:UNLOADING HOSE; MATERIAL:N/A; CAPACITY:N/A; SIZE:N/A; 1 SET OF UNLOADING HOSE TROLLEY COMPRISING MINIMUM TWO HOSES WITH THE LENGTH SUITABLE AS PER THE APPROVED LAYOUT

VAPORIZER,SATURATION,150 — VAPORIZER; TYPE:LNG SATURATION; CAPACITY:150 LPM; HEATING LOAD:N/A; AS PER TECHNICAL SPECIFICATION

UNLOADING PUMP SKID — ITEM NAME:LNG UNLOADING PUMP SKID; TYPE:N/A; ADDITIONAL INFORMATION:CAPACITY:350 LPM; INCLUDING COUPLING, DRIVE MOTOR, VALVES, VFD AND ASSOCIATED INSTRUMENTS, JUNCTION BOX AND CABLE UPTO THE VFD, LOCAL PUSH BUTTON STATION AS PER P&ID, DATA SHEET AND TECHNICAL SPECIFICATION

GAS MANAGEMENT — ITEM NAME:GAS MANAGEMENT SYSTEM; TYPE:BOIL OFF; WHICH INCLUDES BOG VAPORIZER, PRESSURE REGULATING SKID, ELECTRIC HEATER, INTERCONNECTING PIPE TO THE GEG/NEAREST AVAILABLE NG LINE

DISPENSING PUMP SKID — ITEM NAME:LNG DISPENSING PUMP SKID; TYPE:N/A; ADDITIONAL INFORMATION:CAPACITY:150 LPM; INCLUDING COUPLING, DRIVE MOTOR, VALVES, VFD AND ASSOCIATED INSTRUMENTS, JUNCTION BOX AND CABLE UPTO THE VFD, LOCAL PUSH BUTTON STATION AS PER P AND ID AND TECHNICAL SPECIFICATION

LNG DISPENSER — ITEM NAME:LNG DISPENSER; TYPE:N/A; ADDITIONAL INFORMATION:CAPACITY:150 LPM; WITH DUAL FLEXIBLE HOSE AND NOZZLES AS PER TECHNICAL SPECIFICATION

PIPING/TUBING — ITEM NAME:INTERCONNECTING PIPING/TUBING; TYPE:N/A; ENTIRE INTERCONNECTING PIPING/TUBING FOR THE NORMAL AND CRYOGENIC USE ALONG WITH VALVES, SUPPORTS, FITTINGS AND FLANGES AND ITS ACCESSORIES FOR THE LNG UNLOADING, STORAGE, DISPENSING SYSTEM AS WELL AS FOR FIREFIGHTING, INSTRUMENT AIR, NITROGEN PURGING, SERVICE WATER, POTABLE WATER ETC. FOR THE SAFE, TROUBLE FREE AND EFFICIENT OPERATION OF THE PLANT. LANDING STAIRS TO THE LNG DYKE SHALL ALSO BE SUPPLIED BY THE CONTRACTOR

TANK,LNG STORAGE — TYPE:TANK,LNG STORAGE; MATERIAL:N/A; DIMENSION:N/A; CAPACITY:56.8 KL; (DOUBLE-WALLED VACUUM INSULATED CRYOGENIC TANK) WITH NECESSARY VALVES, ASSOCIATED INSTRUMENTS, SAFETY RELIEF VALVES, PBE AND VENT STACK AS PER P AND ID, DATA SHEET AND TECHNICAL SPECIFICATION

PUMP,SUMP,10M3/HR,10MWC — PUMP; PUMP TYPE:SUMP; RATED CAPACITY:10 M3/HR; DIFFERENTIAL HEAD:10 MWC; FOR REMOVAL OF WATER FROM DYKE WITH CONTROL MECHANISM, MUDDY WATER DRAINAGE PUMP WITH CAPACITY TO HANDLE UP TO 7 MM SOLID PARTICLE, SUITABLE FOR HAZARDOUS AREA APPLICATION, FOR FURTHER DETAILS PLEASE REFER ATTACHED DATA SHEET

PUMP,10M3/HR,85MLC — PUMP; PUMP TYPE:HORIZONTAL CENTRIFUGAL END SUCTION; RATED CAPACITY:10 M3/HR; DIFFERENTIAL HEAD:85 MLC; IMPELLER MATERIAL:BRONZE; COMPLETE WITH MECHANICAL SEAL WITH COMPLETE ACCESSORIES LIKE CONTROLLER WITH PRESSURE SENSING LINE WITH 2 CHECK VALVES, SUCTION AND DISCHARGE PRESSURE GAUGE WITH ROOT VALVES, EARTHING, LOCAL PUSH BUTTON, MANDATORY SPARES, CABLING BETWEEN PANEL AND PUMP MOTOR. INCLUDING SQUIRREL CAGE INDUCTION MOTOR AND SUITABLE STARTER. CONFORMING TO REQUIREMENTS OF NFPA-20. PUMP CONTROLLER SHALL BE UL LISTED