Pdg EI and Fans and other electrical works in CTSD store Talkatora ,Lucknow under BA lucknow

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (a) Group -C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

(b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

© 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.(a) 3 x 1.5 sq. mm

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (a) 6 way (4 + 18), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (a) 6-32 A SP MCB 230 V

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) 100 A 4 Pole Isolator

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (a) 5/6 amps switch

(b) 3 pin 5/6 amp socket outlet

SITC of 4'-20 watt LED fitiing complete directly on ceiling/wall i/c connection with 1.5 sq. mm copper conductor single core cable etc. as reqd.

Supplying and fixing of 400mm sweep oscilating type wall fan suitable for operation on 230 volts 50 Hz AC supply complete etc. as required.(M/s,Havells/ Crompton or SS make)

Rewinding of following fan motor with suitable gauge copper winding wire I/c dismantling, servicing, replacement of bearing/bush and reinstallation, testing etc. as reqd.(a) Ceiling fan up to 1400 mm size

S/F of following size energy efficient Ceiling fan suitable for operation on 230 Volts ,single phase 50 Hz AC supply complete etc as reqd without regulator)Make -( Bajaj/Polar /USHA /crompton /havells /orient ).(a) 1200mm

Supplying and laying of following size of pvc insulated pvc sheathed 1.1 kv grade Aluminium conductor cable confirming to relevant IS-Specification i/c fixing on wall surface with suitable GI Shaddle /in air a/w GI Wire /in pipe /in recess /ground etc complete as reqd. (Make -Polycab/havells/finolex). (a) 2 x 6 Sqmm weather proof

(b) 4 x 16 Sqmm armoured

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and making end termination with brass compression gland & aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as reqd. (a) 4 X 16 sq. mm (28mm)

S/F of 20 mm wide PVC cassing capping on wall /roof with suitable screw etc as reqd.

S/F of 63Amp TPNSDFU Switch in steel enclosure alongwith 3nos 63 amp HRC Fuses capable of working 415/500 V i/c fixing the same on wall /pole with suitable clamp/fastner i/c drilling hole , making connection, earthing the body etc. i/c dismenting of existing faulty unit (if required at site)as reqd. (HPL or SS Make)

Supply & Fixing of following LED street Light Fiiting complete with all accessories etc complete as reqd. (M/s Havells/ crompton or SS make). (a) 25 Watt street light fitting

(b) 45/50 watt street light fitting

S/fixing of wall bracket made out by 32 mm B class GI pipe for fixing of street light fitting i/c clamp,nut bolt etc complete as reqd.