PROVN OF NEW OFFICE COMPLEX OF JB SUB AREA SIG COY DANAPUR CANTT UNDER GE DANAPUR CANTT

Amount

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Boring holes 5m deep in soil for Single under reamed piles and getting out and disposal of soil to a distance of n.exc 50m (dia of pile 300mm) complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc and getting out in soft/loose soil complete all as specified and directed

M&L PCC 1:4:8 type-D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete.sub base as in floors complete all as specified and directed.

M&L for hard core of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick with broken bricks, watered and rammed to a true surface complete all as specified and directed.

Returning Filling in,including spreading, levelling, watering and well ramming in layers, not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at level n exc 1.5m above the starting point complete all as specified and directed

M&L brick work using sub class 'B' brick old size in cm (1:6) straight or curved on plan exceeding 6.00 mtr mean radius complete all as specified and directed.

M&L reinforced cement concrete (M-25 Design mix) (using 20 mm graded stone aggregate) in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete all as specified and directed.

M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in columns, pillars, posts, struts etc complete all as specified and directed.

M&L reinforced cement concrete (M-25 Design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC type B1, 1:2:4 (using 20mm graded stone aggregate) as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as specified and directed.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed.

M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L form work to sides of pillars, posts, struts, piers, columns and stanchions for rough finished , square, rectangular or polygonal surfaces of concrete complete all as specified and directed.

M&L Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as spd and directed.

M,&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto all as per item No 18 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as directed.

M&L 15 mm thick rendering in two layers (10mm & 5mm ) on fair faces of bk / concrete surfaces in cm (1:4) with WPC (WPC measured & paid separetely) finished even and smooth (Without using extra cement ) complete all as spd and as directed.

Supply only water proofing compound (liquid), ISI marked.

M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed.

M&L rendering 10mm thick in CM 1:4 on concrete surfacves/ chajja/ ceiling, etc finished even and smooth without using extra cement complete all as specified and directed.

M&L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as directed.

M&L for Prepration of new plastered surfaces of ceiling and applying three coats of white wash complete all as directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L Prepration of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and painted with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for 75mm thick cement conc one 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection joint filled with bitumen and sand mixer 50mm thick finished even and smooth without using extra cement complete all as specified and directed.

M&L for treating under plinth protection at the rate of 5 litres of emulsion per square meter of surface of flooring complete all as specified and directed.

S & F for powder coated aluminium door fame with shutter made out of following section complete fixed to position with hold fast all as specified & directed (a) chowkhat frame of size 101.45 x 44.45 x 1.87 mm thick weight @ 1.92Kg/RM (b) Style/Vertical member of size 83.50 x 44.45 x 1.90 mm thick weightn @ 0.911Kg/RM (c) Top and bottom rail of size 11.60 x 44.45 x 2.00 mm thick weight @ 1.511kg/RM (d) Middle rail of size 49.91x 44.45x 2.01 mm thick weight @ 1.072Kg /RM (e) Top panel with 5.00 mm thick tinted glass fixing with rubber gasket. (f) Bottom panel with 5 to 6 mm thick Alumnium composite panel thick with clips (g) 100 mm dia round handle disc type -02 nos & Alu tower bolt 200mm - 01 No, Hinges 04 Nos each shutter. (h) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 92 x 31.75 x2 mm thick weight @ 0.1.490Kg/RM (b) Style/Vertical member of size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM (c) Top and bottom rail of size size 40 x 27.2 x 2 mm thick weight @ 0.798Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement. etc

S&F anodized aluminium grill (diamond shape of approx size 100x100mm) made out of aluminium flat of size 4x5mm as approved by Engr-in-Charge/GE for window/ ventilators etc complete all as specified & directed.

M&L for Aluminium Anodised window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed.

M&L for Aluminium Anodised frame for doors, windows, ventilators of size 111.60x44.75x2.44mm thick with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F in repairs aluminium (extruded section) body door closer hydraulically regulated designaitn No. 03 universal type, suitable for door shutters up to 1000mm in width and or weight not more than 61 kgs and fixed complete all as specified and directed.

S&F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified and directed.

S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm.

S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-22 complete all as specified and directed.

S&F 150mm long aluminum anodised barrel tower bolts of extruded section as specified.

S&F aluminium alloy handles, cast type anodised 125 mm long complete all as specified and directed.

S&F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Aluminium handles, cast type, anodized 150 mm size ISI Marked complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening complete all as specified and directed.

S&F Factory made soild panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as per specification and drawing.

M&L 75mm thick Plain Cement Concrete 1:4:8 type D2, (using 40 mm graded stone aggregate) as in sub base of floor to received flooring complete all as specified and directed.

M&L for 10mm thick Lighft shade vitrified ceramic tiles in floors area exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed or bedding layers of cement mortar 1:4 complete all as specified & directed.

M&L for 10mm thick Light shade vitrified tiles in skitting, area of tile exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortars 1:4 complete all as specified & directed.

M&L coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 15 mm thick screed bed or bedding layers of cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles on vertical surface 450 x 300 x7mm thick set and jointed in neat cemet slurry and pointed in white cement mixed with pigments to match the shade of tiles over and including 10 mm thick rendering in cement mortarmortar 1:4 complete all as specified and directed.

M&L 100 mm thick Plain Cement Concrete 1:4:8 type B-2, (using 40 mm graded stone aggregate) as in sub base to floor finishes complete all as specified and directed.

M&L for Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks on the sand bedding layer through vibratory compaction by using plate vibrator,filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in copings complete all as directed by Engr-in-Charge.

M&L PCC 1:2:4 type B0, (using 12.5mm graded stone aggregate) as in roof /padding /kerb/sunken slab etc complete all as specified and directed.

M/L Rendering 15 mm thick in cement mortar 1:3 on concrete surfaces mixed with liquid water proofing compound @ 200 ml/50 kg per bag of cement or as per manufacturar instruction finished even and smooth without using extra cement over roof slab complete all as specified and directed . NOTE: water proofing compound shall be measured and paid seperately

Material and labour for cleaning surfaces and applying evenly a coat of hot blown bitumen grade 85/25 @ 1.20 Kg per Sqm over a coat of bituminous based primer @ 0.30 Kg per Sqm till the surface is properly impregnated. After the application of the bitumen, provide polymeric water proofing membrane of approved quality weighting not less than 3 Kg per Sqm with 100 mm over laping and bonded completely to the substrata and the over laps sealed / fused by flame or by bitumen as per manufacturers instruction. After the membrane is laid a layer of blown bitumen grade 85/25 @ 1.20 Kg / Sqm shall be applied and one coat of aluminium paint at the rate of 100 gram per sqm as per manufacturer instruction over bituminous layer complete all as specified and directed. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

S&F tube medium grade galvanized with all fittings and fixed to walls or laid in floors of 15mm bore including cutting chasing in walls etc complete all as specified and directed.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore including cutting chases complete all as specified and directed.

S&F15 mm dia concealed type stop valve fancy type chromium plated complete all as specified and directed.

S&F Bib taps, cast copper alloy, chromium plated , fancy type long body, screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia.

S&F in 15mm bore angle cock, cast copper alloy CP, fancy type high presure with capstan head handle, screwed both ends for iron pipe of for unions complete all as specified and directed.

S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) cascade type of size 380 X 700 X 665 mm coloured/white with cistern (with twin flush fittings) complete including seat cover and fixing of flushing cistern, brackets, flushing pipe etc, fixed in repairs, complete all as specified and directed (Make : Jaquar cat part No CNS WHT 851P180SPP)

S&F in repair vitreous cabinet china wash hand basin, flat back with cabinet one No PVC waste pipe 25mm dia and 75 cm long with 32 mm dia connector, 32 mm size waste fitting, brass chromium plated with long screwed shanks and fly nuts, flange end, bedded in red lead cement and other fixed and PVC connection 15 mm dia & 600mm long with two Nos check nut washer complete including cutting for and pinning in ends of bracket or erecting stand completed all as apecifed and directed.

S&F in repair 32 mm dia waste coupling brass chromium plated with PVC waste pipe complete all as specified and as directed.

S&F in repair 15mm bore Pillar cock for wash hand basin with left hand operating knob with 450 long Braided house and fixed complete all as specified and as directed.

S&F in repair 15 mm bore CP bib tap of fancy type with long shunk with wall flange with cast copper alloy of crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule fixed complete all as specified and directed.

S&F in repair CP angle stop cock 15 mm with wall flange complete all as specified and directed.

S&F CP two way angle stop cock 15 mm with wall flange complete all as specified and directed.

S&F health faucet of CP head with flexible pipe of one mtr length including wall hook for EWC complete all as specified and directed.

S&F flushing jet spray for pedestal pattern EWC including 1.00 m long flexible pipe and brass chromium plated nuts complete all as specified and directed.

S&F CP connection 15 mm size with CP nuts of length 450 mm complete all as specified and as directed.

S&F 100 mm dia grating doom of stainless steel complete all as specified and directed.

S&F CP towel rail 600 mm long fixed with & iron CP brass screw and wooden/plastic cleats complete all as specified and directed.

S&F glass shelf 600mm long including fixed with CP brass screw and wood cleats / rowel plug with wall complete all as specified and directed.

S&F CP towel ring round with round flange & iron CP brass screw and wooden/plastic cleats complete all as specified and directed.

S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified and directed.

S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete.

S&F in repairs sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified.

S&F in water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding 1:2:4 type B1, (using 20 mm graded stone aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) complete all as specified and directed.

S&F PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides .

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity complete all as specified and directed.

S&F ball valves high pressure of brass with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mmdia (min weight-210 gms)

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia complete all as specified and directed.

-Ditto- all as per item No 86 above but 75mm bore including Rubber ring joint with solvent adhesives complete.

S&F PVC (SWR) bends any radius provided of 75 mm dia

S&F PVC (SWR) bends any radius provided of 110 mm dia

S&F PVC (SWR) bends any radius provided with access door of 110 mm dia

S&F PVC (SWR) vent cowl of 75mm dia

S&F PVC (SWR) vent cowl of 110mm dia

S&F 75/100mm bore PVC (SWR) floor trap,plain with grating including jointing to waste pipe, all as specified

Excavating over areas,n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, exc 1.50m but n exc 3.00m deep and getting out soft/loose soil complete all as specified and directed.

Excavating over areas, exc 3 m but n exc 4.50m deep and getting out soft/loose soil complete all as specified and directed.

M & L PCC 1:2:4 type B-2 (using 40 mm graded stone agg) as in Foundation, Filling and Mass Concrete complete all as specified and directed.

M&L brick work with sub class 'B' bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with subclas 'B' bricks in one and half brick honey comb walling, built in CM (1:6) as curved on plan not exc 6.00 m in radius complete all as specified and directed.

M&L Rendering 12 mm thick on Fair Faces of brick work or concrete Surfaces in CM 1:3 complete all as specified and directed.

M&L for Loose filling with aggregates of gauge 80 to 150 mm with broken bricks in soakage pit, soakage wells. complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L Cement concrete in surface channel and drain etc in 1:2:4, type B1 (using 20 mm graded stone aggregate) all as specified and directed.

M&L 15 mm thick Rendering in CM ( 1:4) on fair races of brick work finished surface even and smooth with out using extra cement complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L150mm thick PCC 1:3:6 type C-2 (using 40 m graded stone aggregate) in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S & F 150mm Reinforced concrete pipes, class NP3, laid and jointed with collars complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

Same as item No. 108 here-in-before but one 3 pin, 5amp socket out let on independent board complete all as specified and directed.

Same as item No.108 here-in before but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed.

Same as per item No 108 above but wiring with 4 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent board. (Note : wiring with 2 X 4 sqmm +1 X 4 sqmm run with proper colour code as per IE rules measured in one unit)

M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 6.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed. NOTE : Two runs of 6 Sqmm and one run of 6.0 Sqmm cable and PVC conduit shall be measured as a one unit length.

M&L for sub main wiring with PVC insulated 1100V grade FRLS single core multi stranded copper conductor cable of size 2x4 sqmm + 1x4sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit all as specified and directed by Engr-in-Charge. Note - Two runs of 4sqmm including one run of 4 sqmm including PVC conduit shall be measured as unit length.

S & F Modular metal flush box 1/2 module

S & F Modular metal flush box 3 module

S & F Modular metal flush box 4 module

S & F Modular metal flush box 6 module

S & F Modular metal flush box 8 modules(Horizontal)

S & F Modular metal flush box 12 (3 row x4) modules

S & F modular white cover plate 1 module

S & F modular white cover plate 2 module

S & F modular white cover plate 3 module

S & F modular white cover plate 4 module

S & F modular white cover plate 6 module

S & F modular white cover plate 8 (Horizontal) modules

S & F modular white cover plate 12 (2 x 6) modules

Supply & fixing switch modular flush type 6 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket modular flush type suitable for 6 amp, 2/3 module combined 2 module complete all as specified and directed.

Supply & fixing switch modular flush type 16 amps, single pole, one way complete all as specified and directed.

Supply & fixing socket modular flush type suitable for 6/16 A, 2/3 pin combined 2 module complete all as specified and directed.

S&F ceiling rose single phase , PVC poly carbonate,insulated body three terminals ISI marked complete all as specified and directed.

S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete with suitable for 1 x 63Amp TPN as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 63 Amp in the DB complete with connection testing and commissioning

S& F for sheet metal enclousre factory made for MCB DB's SPN, 8 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete make -Havells all as specified and directed.

S&F Isolator/MCB SP 240 Volt 6 TO 40 Amp ISI marked conforming to 'B" curve, breaking capacity 10 KA complete all as specified and directed.

S&F Isolator SPN 40 amp 30mA for earth leakage. Over load and short circuit protection ISI marked complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.)

Supply & fixing fan regulator, modular type, 120 watt single phase complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

S & F LED light fitting 1x9W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor without remote, electronics fan regulator etc and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. .

Supply & fix exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans.

S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to pole complete all as specified and directed.

Supply and laying for galvanised iron tubing medium grade with and including all fittings such as bends, elbows, tees, short pieces, union etc in trenches complete all as specified and as directed of following sizes :-.

25 mm (1”) dia.

20 mm (3/4”) dia.

S & F for Gun metal gate valve with iron wheel head screwed both ends ISI marked fixed to GI pipe complete all as specified and as directed of following sizes :-

25 mm (1”) dia

20 mm (3/4”) dia.

M & L for Cutting existing GI/CI water mains 80 mm dia in position for insertion of tee, branch line etc to new water connection complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core.

Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/Pole/Stays etc getting out in Soft/Loose Soil, complete all as specified and as directed.

M & L clean dry river sand in trenches/ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified. Note:- Punned thickness shall be measured and paid.

M & L for old size sub class ‘B’ bricks, laid in trenches as cable covers / protection complete all as specified and directed .

M/s Naresh Chand Agrawal (BID ID -3305614)

M/S Priya Trading Agency (BID ID -3305912)

Vijay Bakshi and Son (BID ID -3304679)

J K CONSTRUCTION (BID ID -3304668)

SINHA CONSTRUCTION (BID ID -3304720)

MS BIJAY KUMAR AND SONS (BID ID -3304193)

jaglalchoudharyandsons (BID ID -3305956)