Provision of rubberized road surface at LC Gate no. 7A, 1T, 9A in CSMT-PNVL, LC no. 2A, 2B ,4A in CLA-TMBY & LC no.1 at JNJ entry of SNPD Car shed. (Umbrella 2024-25 under PH-29)

2A, 2B ,4A in CLA-TMBY & LC no.1 at JNJ entry of SNPD Car shed. (Umbrella 2024-25 under PH-29)

Item- 01 Part 'A' MS Itom

MUMBAI- CST-DIVISION-ENGG/CENTRAL RLY

S No. Item Description of Item Unit Qty Rate Amount

13.0 FINISHING

13.44S EXTERIOR FINISHING

Finishing with Deluxe Multi surface paint system for

13.48 interiors and exteriors using Primer as per

manufacturers specifications :

13.48.3 Painting Steel work with Deluxe Multi Surface Paint to Sqm 1050 170.7 179235

give an even shade. Two or more coat applied @ 0.90

ltr/10 sqm over an under coat of primer applied @

0.80 ltr/10 sqm of approved brand and manufacture

13.50 Applying priming coat:

13.50.3 With ready mixed red oxide zinc chromate primer of Sqm 1050 67.4 70770

2 approved brand and manufacture on steel galvanised

iron/ steel works

13.50.4 With ready mixed red oxide zinc chromate primer of Sqm 1050 36.1 37905

3 approved brand and manufacture on steel work

16.0 ROAD WORK

16.30S PREMIX CARPET

16.35 2.5 cm premix carpet surfacing with 3 cum of stone Sqm 840 252.15 211806

chippings 10 mm nominal size per 100 sqm and

bitumen emulsion (medium setting min. 65% bitumen

contents) complying with IS : 8887, using 96 kg per

cum of chippings of road surface, including

consolidation with road roller etc complete .

Providing and laying Bitumen Penetration Macadam

with hard stone aggregate of quality, size and grading

as specified, with bitumen of suitable penetration

grade, including required key aggregate as specified,

spreading coarse aggregate with the help of self

propelled/ tipper tail mounted aggregate spreader

and applying bitumen by a pressure distributor and

then spreading key aggregate with the help of

aggregate spreader complete, including consolidation

with road roller of minimum 8 to 10 tonne capacity to

achieve specified values of compaction and surface

16.36.1 For 50 mm compacted thickness using coarse Sqm 840 505.65 424746

aggregate of size 50-20 mm graded @ 0.60 cum per

5 10 sqm key aggregate of size 12.5 mm graded @ 0.15

cum per 10 sqm. With paving asphalt grade VG - 10 @

16.40S SEAL COAT

16.40 Providing and laying seal coat of premixed fine Sqm 840 88.55 74382

aggregate ( passing 2.36 mm and retained on 180

micron sieve) with bitumen using 128 kg of bitumen

6 of grade VG - 10 bitumen per cum of fine aggregate

and 0.60 cum of fine aggregate per 100 sqm of road

surface, including rolling and finishing with road roller