Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹18.5 L
EMD Value
₹37,020
Closing Date
7 Jul 2025, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Airport Services Centre
HINDUSTAN AERONAUTICS LIMITED AIRPORT SERVICES CENTRE (Bangalore Complex) HAL Airport Vimanapura Post Bangalore - 560 017
REPAIRS AND RENOVATION OF TIOLETS AT FIRE RADAR AND ATC BUILDING
21180
ASC/CIV/01/25
IMM
Bangalore Complex- Airport Services
₹0
₹37,020
7 Jul 2025
14 Jun 2025
14 Jun 2025
7 Jul 2025
HINDUSTAN AERONAUTICS LIMITED BANGALORE AIRPORT SERVICES CENTRE
NAME OF THE WORK: "Repairs and Renovation of Toilets attached to Fire,Radar building,and ATC building and miscellaneous repairs in ASC,HAL(BC)." Cont. No: ASC/CIV-01/25-26"
Name of the Tenderer:
Sl. No Specification Bidder Compliance (Yes/No)
1 Specification as per Tender Document
HINDUSTAN AERONAUTICS LIMITED BANGALORE AIRPORT SERVICES CENTRE
NAME OF THE WORK: "Repairs and Renovation of Toilets attached to Fire,Radar building,and ATC building and miscellaneous repairs in ASC,HAL(BC)." Cont. No: ASC/CIV-01/25-26"
Name of the Tenderer:
Sl. No Specification Quantity Unit Rate in Figs [Including GST] Rate in words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (4) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.
1 Demolishing Cement Concrete 1:3:6 or richer mix manually / by mechanical means including disposal of Material within 50 meters lead as per direction of EIC- Cu.M 5.00 2580.31 Rupees Two Thousand Five Hundred Eighty and Thirty One Paise Only 12901.55
2 Dismantling Doors, Windows and clerestory windows (Steel or wood) shutter including chowkhats, architrave holdfasts etc complete and stacking within 50 meters lead of area 3sqm and below complete as per direction of EIC- Sqm 20.00 389.23 Rupees Three Hundred Eighty Nine and Twenty Three Paise Only 7784.60
3 Dismantling Tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10mm to 25mm etc complete as per direction of EIC- Sqm 80.00 77.80 Rupees Seventy Seven and Eighty Paise Only 6224.00
4 Dismantling of GI pipes(external works) including excavation and refilling trenches after taking out the pipes,manually/ by mechanical means including stacking of pipes with in 50m lead as directed by EIC 15mm to 40mm dia rm 50.00 158.79 Rupees One Hundred Fifty Eight and Seventy Nine Paise Only 7939.50
5 Disposal of surplus earth/moorum/building rubbish/ malba(debriswaste)/ similar unserviceable, dismantled or waste material of partitions,ceiling boards,tiles,frames etc by mechanical transport including loading, transporting, unloading in all lifts/loads upt 10 km distance from HAL. completely as per directions of Engineer-in-charge. Cum 3.00 523.75 Rupees Five Hundred Twenty Three and Seventy Five Paise Only 1571.25
6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc.,all complete as directed by Engineer-incharge. Cu m 10.00 188.15 Rupees One Hundred Eighty Eight and Fifteen Paise Only 1881.50
7 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains, pipes, cables etc. in all kinds of soils (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m with all labour, tools & tackles, plant & machinery, hire & fuel charges etc., all complete as directed by Engineer-incharge. Cu m 3.00 275.92 Rupees Two Hundred Seventy Five and Ninety Two Paise Only 827.76
8 Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock etc., in trenches, plinth,sides of foundations etc., spreading in layers not exceeding 20 cm thick, watering, breaking / removing clods exceeding 50 mm, ramming and consolidation of each deposited layer etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50 m and for all lifts, all complete as directed by the Engineer-in-Charge. Cu m 5.00 207.76 Rupees Two Hundred Seven and Seventy Six Paise Only 1038.80
9 Supplying, mixing and placing plain cement concrete (1:4:8) (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate) of required thickness using 40 mm down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge. Cu m 3.00 7220.72 Rupees Seven Thousand Two Hundred Twenty and Seventy Two Paise Only 21662.16
10 Supplying, mixing and placing plain cement concrete (1:2:4) (1 Cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate) of required thickness using 20 mm nominal size down graded hard stone/granite aggregate in accordance with IS 456 in posts, struts, buttresses, string or lacing courses,parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,sunken floor,plinth area etc including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge. Cu m 2.00 10488.91 Rupees Ten Thousand Four Hundred Eighty Eight and Ninety One Paise Only 20977.82
11 Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge.Note : a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry. Kgs 750.00 114.32 Rupees One Hundred Fourteen and Thirty Two Paise Only 85740.00
12 Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kg/m3 design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge. Note: (i) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.
a) All works upto plinth level like footing,pedetsal,piles,plinth beam,flooring,including necessary openings and packing if any for laying pipes, cables etc. Cum 2.50 10075.04 Rupees Ten Thousand Seventy Five and Four Paise Only 25187.60
b) All works above plinth level column,beams,slabs,canopy,chajja,stairscase etc. level including necessary openings and packing if any for laying pipes, cables etc. Cum 6.50 10452.02 Rupees Ten Thousand Four Hundred Fifty Two and Two Paise Only 67938.13
14 Formwork by providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc as per drawing., all complete as directed by the Engineer-in-Charge Note :Formwork material is contractor's own property and shall be removed after completion of work.
a) Foundations,pile caps,footings, bases of columns/pedestal,flooring,for mass concrete etc. Sqm 25.00 415.68 Rupees Four Hundred Fifteen and Sixty Eight Paise Only 10392.00
b) Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 20.00 780.58 Rupees Seven Hundred Eighty and Fifty Eight Paise Only 15611.60
c) Suspended floors, roofs, landings, balconies and access platform catwalk,brackets etc Sqm 20.00 982.89 Rupees Nine Hundred Eighty Two and Eighty Nine Paise Only 19657.80
15 Supplying and laying Brick work with common burnt clay machine moulded modular bricks of class designation 7.5 for walls,chambers,ducts,drains etc awith CM(1:6) t all levels & heights including hoisting and setting in position and along with necessary formwork, curing, finishing, making or leaving holes & chases and making making horizontal and vertical grooves 10 mm wide 12 mm deep before plastering all complete as directed by the Engineer-in-Charge. Cu m 6.00 6672.86 Rupees Six Thousand Six Hundred Seventy Two and Eighty Six Paise Only 40037.16
16 Supplying and laying Half Brick work with common burnt clay machine moulded modular bricks of class designation 7.5 for walls,chambers,ducts etc with CM(1:4) at all levels & heights including hoisting and setting in position and along with necessary formwork,steel rod placement between every 4th course, curing, finishing, making or leaving holes & chases and making making horizontal and vertical grooves 10 mm wide 12 mm deep before plastering all complete as directed by the Engineer-in-Charge. Sqm 20.00 1191.23 Rupees One Thousand One Hundred Ninety One and Twenty Three Paise Only 23824.60
17 Providing and fixing granite stone slab of approved sahe with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cementconcrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth.All asper the direction of Engineer Incharge. Sqm 3.00 4294.96 Rupees Four Thousand Two Hundred Ninety Four and Ninety Six Paise Only 12884.88
18 Providing and fixing Granite stone slab of with (18mm to 25mm thick), area of slab not less than 0.5sqm, like Ruby Red/Black/Cherry with gang saw cut, mirror polished, premoulded and prepolished, machine cut for platforms, vanity counters, and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels as per direction of Engineer-in-charge. Sqm 2.50 5738.31 Rupees Five Thousand Seven Hundred Thirty Eight and Thirty One Paise Only 14345.78
19 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat.Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.complete as per direction of Engineer-in-charge. RM 40.00 605.21 Rupees Six Hundred Five and Twenty One Paise Only 24208.40
20 Providing and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish including accessories made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856 of approved brand/type, complete as per direction of Engineer-in-charge. Sqm 16.00 4758.29 Rupees Four Thousand Seven Hundred Fifty Eight and Twenty Nine Paise Only 76132.64
21 Providing and fixing bright finished brass handles of 125mm size with screws etc.complete as per direction of Engineer-in-charge. Each 10.00 272.05 Rupees Two Hundred Seventy Two and Five Paise Only 2720.50
22 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete as per direction of Engineer-in-charge. . Each 10.00 128.95 Rupees One Hundred Twenty Eight and Ninety Five Paise Only 1289.50
23 Providing and fixing bright finished brass tower bolts of 250x10mm (barrel type) with necessary screws etc. complete as per direction of Engineer-in-charge. Each 12.00 468.10 Rupees Four Hundred Sixty Eight and Ten Paise Only 5617.20
24 Providing and fixing bright finished brass 100 mm mortice latch and lock with (min.4 to 6 Levers) and a pair of lever handles of approved quality with necessary screws etc. complete as per direction of Engineer-in-charge. . Each 6.00 905.93 Rupees Nine Hundred Five and Ninety Three Paise Only 5435.58
25 Providing and fixing aluminium sliding door bolts(aldrop) of 250 x16mm , ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. Each 10.00 276.24 Rupees Two Hundred Seventy Six and Twenty Four Paise Only 2762.40
26 Providing and fixing 20mm dia chromium plated brass curtain rod /Towel rail of 1800mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary. Each 10.00 750.32 Rupees Seven Hundred Fifty and Thirty Two Paise Only 7503.20
27 Providing and laying Ceramic Glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in colours such as white, Ivort, Grey Fume Red Brown laid on 20mm thick cement mortar 1:4 etc complete and as directed by EIC Sqm 50.00 1162.34 Rupees One Thousand One Hundred Sixty Two and Thirty Four Paise Only 58117.00
28 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by EIC, in skirting risers of steps and dados, over 12mm thick bed of cement mortar 1:3 and jointing with grey cement at 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Sqm 75.00 1344.03 Rupees One Thousand Three Hundred Forty Four and Three Paise Only 100802.25
29 Providing and laying rectified Glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS 15622 of approved make in colours such as white, Ivort, Grey Fume Red Brown laid on 20mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigments etc complete and as directed by EIC Sqm 10.00 1409.80 Rupees One Thousand Four Hundred Nine and Eighty Paise Only 14098.00
30 Providing and fixing Single socketed pipes of 110mm diameter unplasticised Rigid PVC water pipes conforming to IS : 13592 Type A of approved brand, on wall/floor including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion .complete as per direction of Engineer-in-charge. Metre 75.00 400.04 Rupees Four Hundred and Four Paise Only 30003.00
31 Plastering to internal brick/block wall with 15 mm thick on the rough side of single or half brick wall of cemnet mortor (1:6) including leveling,curing and making the level smooth and at all heights, plaster drip course/ groove in plastered surface or moulding to R.C.C. projections and execute the work complete as per direction of Engineer-in-charge. Sqm 250.00 405.98 Rupees Four Hundred Five and Ninety Eight Paise Only 101495.00
32 Plastering to ceiling with 12 mm thick on the rough side with cemnet mortor (1:4) including leveling,curing and making the level smooth and at all heights and execute the work complete as per direction of Engineer-in-charge. Sqm 150.00 367.87 Rupees Three Hundred Sixty Seven and Eighty Seven Paise Only 55180.50
33 Plastering to external brick/block wall with 18 mm cement plaster in two coats under layer 12 mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).including leveling,curing and making the level smooth and at all heights, plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.The work to be completed as per direction of Engineer-in-charge. Sqm 100.00 549.66 Rupees Five Hundred Forty Nine and Sixty Six Paise Only 54966.00
34 Plastering to concrete wall with 20 mm thick cement plaster in two coats withsuitable coats including hacking the surface, leveling,curing and making the level smooth or moulding to R.C.C. projections.The work to be completed as per direction of Engineer-in-charge. (Water proofing chemical will be paid extra separately). Sqm 50.00 551.78 Rupees Five Hundred Fifty One and Seventy Eight Paise Only 27589.00
35 Providing and mixing water proofing material in plaster work in proportion recommended by the manufacturers like Roff,Fosroc,Basf,Dr.Fixit.The work to be completed as per direction of Engineer-in-charge. Per bag of 50Kg cement used in mix 50.00 23.43 Rupees Twenty Three and Forty Three Paise Only 1171.50
36 Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams/ litre after applying white cement based putty of average thickness 1mm over the plastered wall surface including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand,complete as per direction of Engineer-in-charge. Sqm 250.00 395.17 Rupees Three Hundred Ninety Five and Seventeen Paise Only 98792.50
37 Providing and Finishing walls with Acrylic Smooth exterior paint of required shade for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including scrapping,preparationof surface for completing the work as per direction of Engineer-in-charge. Sqm 200.00 170.24 Rupees One Hundred Seventy and Twenty Four Paise Only 34048.00
38 Providing and applying synthetic enamel paint for pipes ,grills,chequered plate,etc in Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture,filling joints,metal patti etc ,complete as per the direction of Engineer-in-charge. Sqm 50.00 314.40 Rupees Three Hundred Fourteen and Forty Paise Only 15720.00
39 Dismantling 15 to 40 mm dia G.I./cpvc pipe including stacking of dismantled pipes (within 50 metres lead) including making temporary arrangements for continuing ongoing services to toilets/division maintenance as per direction of Engineerin-Charge RM 50.00 3.45 Rupees Three and Forty Five Paise Only 172.50
40 Providing and fixing bright finished brass hard drawn hooks(coat hooks) and eyes of 300mm size.complete as per direction of Engineer-in-charge. Each 15.00 107.96 Rupees One Hundred Seven and Ninety Six Paise Only 1619.40
41 Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. Cum 3.00 2183.81 Rupees Two Thousand One Hundred Eighty Three and Eighty One Paise Only 6551.43
42 Demolishing stone rubble masonry in cement motar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : Cum 3.00 2606.49 Rupees Two Thousand Six Hundred Six and Forty Nine Paise Only 7819.47
43 Providing and fixing C.P. brass toilet paper holder of approved brand and fixing with screws,raw plugs etc.complete as per direction of Engineer-in-charge. Each 10.00 851.92 Rupees Eight Hundred Fifty One and Ninety Two Paise Only 8519.20
44 Providing and fixing beveled edge mirror of size 600x450mm of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per direction of Engineer-in-charge. . Each 8.00 1704.43 Rupees One Thousand Seven Hundred Four and Forty Three Paise Only 13635.44
45 Providing and fixing Wall hung half pedestal Vitreous China Wash basin size of approx size 630x450 mm fixed with with C.I. brackets/rack bolts , single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern,P.V.C. waste pipe with waste fittings of 40mm dia and make it function of approved brand/make, including painting of fittings and brackets, cutting and making good the walls wherever required.complete as per direction of Engineer-in-charge. Each 8.00 2483.63 Rupees Two Thousand Four Hundred Eighty Three and Sixty Three Paise Only 19869.04
46 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of approved brand with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all connecting fittings and fixtures to make it operational completely, including cutting and making good to the walls and floors wherever required complete as per direction of Engineer-in-charge. Each 8.00 6906.48 Rupees Six Thousand Nine Hundred Six and Forty Eight Paise Only 55251.84
47 Providing and fixing 8 mm dia C.P. / S.S. Jet (Health Fuacet) with flexible tube upto 1 metre long with S.S. triangular plate on walls/Eureopean type W.C. material of approved make and quality all as per instructions of Engineer - in - charge. Each 10.00 370.10 Rupees Three Hundred Seventy and Ten Paise Only 3701.00
48 Providing and fixing white colour wall hung vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption approx.), having water inlet from back side, including fixing to wall with brackets embedded in cement mortar (1:3), connecting the waste pipe/waste coupling to floor trap with all necessary fittings and accessories like 32 mm dia semi-rigid PVC waste pipe(concealed in the wall) including PVC waste fittings, clamps etc all as per manufacturers specification and direction of Engineer-in-charge. Each 6.00 8568.09 Rupees Eight Thousand Five Hundred Sixty Eight and Nine Paise Only 51408.54
49 Providing, fixing, testing and commissioning trap ( floor trap ) of approved make with 100 mm inlet and 75 mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , connection with PVC soil / waste pipe, necessary 150 mm thick cement concrete (1:2:4) for embedding the trap,etc.,all complete as directed by the Engineer-in-Charge. Each 24.00 626.88 Rupees Six Hundred Twenty Six and Eighty Eight Paise Only 15045.12
48 Constructing masonry Chamber (60x60x75cm) inside or outside (or approx. size as per site condition) , in brick work of class designation 7.5. in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design,complete as per direction of Engineer-in-charge. Each 1.00 11514.14 Rupees Eleven Thousand Five Hundred Fourteen and Fourteen Paise Only 11514.14
49 Providing and fixing 15mm nominal bore dia C.P. brass bib cock of approved quality conforming to IS:8931, all complete as directed by the Engineer-in-Charge. Each 18.00 537.21 Rupees Five Hundred Thirty Seven and Twenty One Paise Only 9669.78
50 Providing and fixing Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing, necessary reducers, tank adaptors etc. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls etc as per direction of Engineer in Charge.
a) 15 mm dia RM 75.00 527.67 Rupees Five Hundred Twenty Seven and Sixty Seven Paise Only 39575.25
b) 20 mm dia RM 80.00 569.86 Rupees Five Hundred Sixty Nine and Eighty Six Paise Only 45588.80
c) 25 mm dia RM 90.00 664.89 Rupees Six Hundred Sixty Four and Eighty Nine Paise Only 59840.10
d) 32 mm dia RM 18.00 783.66 Rupees Seven Hundred Eighty Three and Sixty Six Paise Only 14105.88
51 Providing and fixing Extrenal exposed Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
a) 32 mm nominal dia RM 100.00 464.92 Rupees Four Hundred Sixty Four and Ninety Two Paise Only 46492.00
52 Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms(or nearest availabe size and weight). Each 10.00 118.14 Rupees One Hundred Eighteen and Fourteen Paise Only 1181.40
53 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of 1000litres capacity , IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes for tank and make operational for supply of water to all floors. All complete as per EIC instructions. Each 6.00 11660.00 Rupees Eleven Thousand Six Hundred Sixty Only 69960.00
54 Providing and laying & jointing stoneware pipes of 250 mm dia SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1Cement :1 fine sand) including testing of joints etc complete and as per the direction of Engineer Incharge. Rmt 20.00 1595.94 Rupees One Thousand Five Hundred Ninety Five and Ninety Four Paise Only 31918.80
55 Making connection of drain or sewer line with existing manhole (For pipes 100 to 250 mm diameter)including breaking into and making good the walls, floors with cementconcrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete as per the direction of Engineer Incharge. Each 6.00 859.08 Rupees Eight Hundred Fifty Nine and Eight Paise Only 5154.48
51 Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators,and partitions for fixed and shutters with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, hinges/pivoting ,filling up the gaps at junctions, with dash fasteners and EPDM rubber/neoprene gasket,accessories to oparet the doors,windows,ventilators all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling to be paid for separately) : Kg 50.00 617.64 Rupees Six Hundred Seventeen and Sixty Four Paise Only 30882.00
53 Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows,shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. Sqm 9.00 1182.32 Rupees One Thousand One Hundred Eighty Two and Thirty Two Paise Only 10640.88
54 Providing and fixing glazing in aluminium door, window, ventilator,louvers,shutters and partitions etc. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) along with EPDM rubber / neoprene gasket etc. all complete as per the architectural drawings and the directions of Engineer-in-charge . Sqm 9.00 1595.83 Rupees One Thousand Five Hundred Ninety Five and Eighty Three Paise Only 14362.47
55 WATER PROOFING:Providing and laying integral cement based water proofing treatment with average thickness of 120 mm and minimum thickness at khurra as 65 mm, including preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats25 mm to 115 mm size with 50% of cement mortar 1:5 (1cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge over 20 mm thick layer of cement mortar of mix 1:5(1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer in-charge to required slope and treating similarly the adjoiningwalls upto 300 mm height including rounding of junctions of walls and slabs. Sqm 90.00 1785.68 Rupees One Thousand Seven Hundred Eighty Five and Sixty Eight Paise Only 160711.20
a) (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
Sub-Total (Exculding GST) Rupees Eighteen Lakh Fifty One Thousand Two Hundred Seventy and Eighty One Paise Only 1851270.82 1568873.572
Sub-Total (including GST)
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount
Tenderer's Quote (Excluding GST) 1851270.82 ABOVE % 1851270.82
The above Rates includes 18% GST
Grand Total (Including GST) Rupees Eighteen Lakh Fifty One Thousand Two Hundred Seventy and Eighty One Paise Only 1851270.82
Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.
WARNING: PLEASE ENTER PERCENTAGE QUOTE
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.PDF
TENDER_DOCUMENT • 4.47 MB
Technical.xlsm
TENDER_DOCUMENT • 0.05 MB
PRICEBID.xlsm
TENDER_DOCUMENT • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .