REPAIR/MAINT TO GUARD ROOMS, DSS AREA, NAVY HANGER, WATCH TOWERS, CERTAIN SWTS, OFFICE BUILDINGS, LABS, OTM BUILDINGS AND OTHER B/R WORKS IN TECHNICAL AREA

Amount

SCHEDULE A BOQ

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repair Pillar tap 15 mm cast copper alloy, with capstain heads, chromium plated, fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

S&F in repairs Aluminium body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

S&F in repairs Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor overall 150mm complete all as specified and as directed

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed

M&L Demolition of Cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed

M & L Cement concrete 1:4:8 type D-2 using 40mm stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed

M&L for dismantling wrought iron or mild steel work of any description complete all as specified and as directed

S & F Steel work in tubular trusses/ post including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St.-240 complete all as specified and as directed

M&L MS Plates (Plain or chequered) channels (confirming to Fe 410 W Gde E-250 A quality), square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed

M&L for Joist, channel, angle, or tee sections, fixed independently (confirming to Fe 410 W Gde E-250 A quality), without connecting plates, etc. complete all as specified and as directed

M&L for dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed

S&F Pre painted Coloured corrugated Galvalume roofing system sheet 0.50 mm thick having Zinc aluminum alloy coating AZ150 shall be as per IS:277/ASTM 1379 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed

M&L MS flat iron wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc. , and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n exc 5cm long diameter of neck 5 to 10mm complete all as specified and directed

M&L Preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed

Excavating in post holes (or similar holes) each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface as in hard / dense soil complete all as specified and as directed

S&F in repair Sink cock with swival spout Cat Part No WPG3321A1 of Parryware or Cat Part No F2014261 of CERA or equivalent complete all as specified and as directed

S&F in repair Cistern Syphon for flush tank of high quality ABS material complete all as specified and as directed

S&F in repair Two way bib cock Cat Part No T4634A1 of Parryware or Cat Part No F1015161 of CERA or equivalent complete all as specified and as directed

S&F in repairs CP Soap dish CAT Part No F5007106 of CERA or WPT6902A1 of Parryware or equivalent complete all as specified and as directed

M&L for anti bird net UV black in colour fixed in entrance door pully based side openable made of material Polyolefin all weather proof co-polymer of machine knotting using CNC machines with DSLS technology for anti slip knotting, heat setting should be steam set for greater dimensional stability and knot firmness and diameter of the twine is 1mm and the size of mesh 25x25mm(+/-2mm) of square mesh and should achieve twine breaking strength of 16 kgf min, MBS (Mesh breaking stength) 12 Kgf and KBS (Knot Breaking strength) 22 Kgf min fixed including dismantling existing anti bird net of any description complete all as manufacturer's instruction complete all as specified and as directed Make:- Leo Technova India / M/s Srijan systems Pvt Ltd. Note : Necessary Scaffolding/Crane for repair/replacement of anti bird netting in hangars (Upto 13.00 mtr height) should be arranged by the Contractor. Cost for this arrangement shall be borne by the contractor.

S&F in repairs Wind operated Turbo Ventilators of size 24 inches dia with FRB base plate material of construction for ventilator is high grade Industrial Aluminium of thickness not less than 0.5mm. Material of construction of hardware is stainless steel-304. Bearing shall be steel in completely enclosed and dust proof integrated housing and aligned with each other, it shall have capability to rotate at nearly zero wind speed. Turbo ventilator shall have UV stabilized powder coated and capable of static balancing shall have high exhaust capacity and there shall not be any exhaust problem due to air block draft. Fixing arrangement shall have high quality rubberised hardware to prevent leak during rain. All Turbo Ventilator to be installed by manufacturer's auth person only. Contractor shall give no leakage guarranty for a period of three years from the date of installation of Turbo Ventilator all as specified and as directed. Make : M/S Turbo Ventilators, M/S SVS Wind Driven Turbo Ventilators, M/s Arven Turbo Ventilators.

M&L for dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed

S&F False ceiling using GI snap grid size 60x60cm with main runner 38x24mm, wall angle & cross tee 29x24mm wall angle 24x24mm suspended with 4mm dia GI Wire fixed with steel dash fasteners carrying max load upto 8.1 Kg/Sqcm with and including 8mm thick designer PVC ceiling board complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectaangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectaangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed

M&L Glazed ceramic coloured tiles in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in CM 1:4 complete all as specified and as directed

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed

Taking down Chowkhat or frame not exceeding 1.5 Sq.m each with shutter (without taking off shutters from the frame) complete all as specified and as directed

Taking down Chowkats or frames with shutters exceeding 1.5 Sq.m each but n exc 4 sq.m each with shutter (without taking off shutters from the frame) complete all as specified and as directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed

S&F Factory made Solid PVC Door Shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded both side prelaminated PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and as directed (Stile and rails feathered at edges)

S & F 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed.

S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F 150mm extruded aluminum alloy handles, fabricated type, anodised complete all as specified and as directed

S&F in repair 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudud sections or cast- aluminum alloy and fixed complete all as specified and as directed.

S & F in repair 100mm long Butt hinges medium weight cold rolled stainless steel, and fixed complete all as specified and as directed.

S&F in repair 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S&F in repair 150mm extruded aluminum alloy handles, fabricated type, anodised complete all as specified and as directed.

Taking down shutters exc 1 Sqm but n exc 2 Sqm and refixing in the same opening after easing and adjusting complete all as specified and as directed

Taking down shutters exc 2 Sqm and refixing in the same opening after easing and adjusting complete all as specified and as directed

M&L for demolition of stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in cement mortar complete all as specified and as directed

M&L Granite 20mm thick (table rubbed and polished) in steps, Jambs, Pillars, Windows, cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed

M&L Granite 20mm thick (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10mm thick backing coat in CM 1:4 all as specified and as directed

M&L for Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed

Demolition of brick work or stone/ boulder masonry built In cement mortar,including all quoin,arches.pillars etc but excluding ashlar facing,dressed stone work and precast concrete articles and rubbish off the premises complete all as specified and as directed

M&L Brick work with modular flyash bricks, straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed

M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width type C-1 1:3:6 using 20mm graded stone aggregate and setting in mortar 1:6 straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed

M&L Preparing new surfaces of plastered or unplastered wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed

M&L taking down cement plaster of any description and removal of debris outside MD land complete all as specified and as directed

M&L Preparing new surfaces of plastered or unplastered wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed

M&L Preparing new surfaces of plastered or unplastered wall and applying three coats of white wash complete all as specified and as directed

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) white with fixing bolts including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed

S&F in repair PVC valveless syphonic action type flushing cistern,10 Ltr capacity low level white with inlet ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density of PVC 32 mm dia, for low level cistern complete all as specified and as directed

S&F in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed

S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400mm excluding excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and as directed

S&F in repairs vitreous china urinals bowl type urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws pointing around urinal back with cement (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S & F in repairs Chromium plated urinal spreader suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair Bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S&F in repair Stop valves 15 mm fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed

S&F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Chromium plated brass shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed

S&F in repairs Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and as directed

M&L in repair PVC (SWR) floor trap (dia of outlet 75mm), plain with grating including jointing with solvent cement complete all as specified and as directed

M&L in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and as directed

S&F 3-layer 25 mm PP-R poly propyelene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls ceilings or in floors etc complete all as specified and as directed

Taking up or down steel tubing and connections, complete all as specified and as directed

S&F in repairs 25mm outer dia of pipe PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed

Taking down damaged PVC (SWR) pipes 75mm/110mm dia single socketed, in any length with rubber ring joints, fixed in wall and bends complete all as specified and as directed

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs 75mm dia PVC (SWR) bends any radius complete all as specified and as directed

S&F in repairs 110mm dia PVC (SWR) bends any radius complete all as specified and as directed

S&F in repairs 110mm dia PVC (SWR) vent cowl complete all as specified and as directed

S&F in repairs 75mm dia PVC (SWR) junction single, (single T), equal or unequal complete all as specified and as directed

S&F in repairs 110mm dia PVC (SWR) junction single, (single T), equal or unequal complete all as specified and as directed

S&F in repairs Brass chromium plated bottle traps 32mm bore dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed

S&F in repair 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed

S&F in repair PVC white flexible waste pipe drain hose of inner dia 32mm for wash basins and urinals (600-750mm length & weight 105gm approx) complete all as specified and as directed

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed

M&L in repairs SS grating doom 125mm/150mm dia with waste hole including taking down existing one complete all as specified and as directed

S&F in repairs aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and as directed

Taking down carefully any type of steel rolling shutters, of size exc. 5 Sqm but n. exc. 15 Sqm each, inspecting/notifying the defective springs, bearings, shaft, side guides, Gear box etc. including greasing and replacement of unserviceable/ defective parts and refixing in the same and releasing the tension in the springs, lowering complete all as specified and as directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

M&L Hacking out old broken glass exc 1.5 Sqm (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed

S&F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed

S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

S&F 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

M&L Preparation of new wood or wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed

Supply and fix aluminium powder coated of three track sliding window outer frame top & sides (section no-20831) of size 92.0x31.75x1.5mm weighing 1.06 Kg/m, frame bottom (Section No 20832) of size 92.0x31.75x1.5mm weighing 1.248Kg/m , shutter to plain vertical (Section No 21093) of size 39x18x1.5mm weighing 0.634 Kg/m, shutter interlock vertical frame (section 21094) of size 39x18x1.55 weighing 0.734 Kg/m, shutter bottom horizontal frame (Section No 20551) size 40x20x1.5mm weighing 0.484 Kg/m, with powder coating of min thickness 50 micron, sliding type with out sash bars, 4mm thickness colour glass, rubber packing, snap beading screws with stainless steel wire mesh, including taken down existing window with chowkats of any size, complete all as specified. Note:- (i) Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt. (ii) Thickness of powder coating shall be minimum 50 micron

M&L Powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat etc. complete all as specified and as directed. Note: Minimum thickness of powder coating 50 micron

S&F powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, floor spring, handles 2 Nos in each doors, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. Note:-Glazing/gauzing and particle board work shall be measured and paid separately

M&L 9mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to aluminium frame complete all as specified and as directed

M&L Coloured tinted float glass and glazing, 4mm thick with oil putty in squares not exceeding 0.5 Sqm in each pane, with glazing clips and oil putty, complete all as specified and as directed

M&L for Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed

S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed

Supply and fixing in repairs factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. and provided with Clear Glass of Saint Gobain / Modiguard make with thickness of 4mm and stainless steel wire cloth of 0.19mm nominal dia. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and as directed. Note: For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for anodised aluminium sliding doors standard JINDAL or equivalent section size 63.5 x 38x1.60mm for frame and section size 47.62x44.45x1.18mm for vertical style section size 47.62x44.45x1.18mm for top and central rail section size 95.25x44.45x1.16mm for bottom rail, section size 19x17.3x0.80mm for glazing clip for shutter including fabrication to required size and partly panelled with 12mm thk both side prelaminated particle board and partly glazed with 4mm thick plain glass including fitting etc including with necessary channel & wheels at top for sliding door , handle, mortise lock heavy duty and taking down existing unserviceable aluminium door complete all as specified &directed by Engr-in-charge. Note :- Aluminium section size specified above if not available in the market next immediate higher size of same make shall be provided without any extra cost to the Govt.

S & F Chequered cement concrete coloured tiles 300 x 300 x 25 mm thick, machine pressed heavy duty any pattern/type, chemically treated set jointed and pointed in neat cement slurry as in paths, etc and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) including demolition of stone slab and tiles of any description or thickness in floors, aporon etc complete all as specified and as directed

M & L Providing 75mm thick plain cement concrete 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in sub base to tiles complete all as specified and as directed

M & L Hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface including demolition of existing undulated hardcore surface and removing the same complete all as specified and as directed

M&L 100mm thick, plain cement concrete (1:1(1/2):3), type A-1 (using 20 mm graded mechanically crushed stone aggregates), as in hardstanding including making joints @ 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement complete all as specified and as directed. Note :- The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and as directed

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment complete all as specified and as directed

M&L for 50mm thick sand filling under floors/paver block or in foundations including watering and consolidation complete all as specified and as directed

M&L 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to wooden frame work complete all as specified and as directed

M&L 25 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws to wooden frame work complete all as specified and as directed

S&F Continuous (piano) hinges 30mm mild steel, bright finish or electro galvanised complete all as specified and as directed

S&F Brass locks 4 levers for Cupboard, Grade I, size 75mm complete all as specified and as directed

S&F 75mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed

S&F 75mm Extruded brass handles, fabricated type polished complete all as specified and as directed

S&F external teak wood lipping, 6mm thick fixed with nails over particle board complete all as specified and as directed

S&F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in all as specified and as directed

Demolition of cement concrete in ground floor and paving n.exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick screed bed in cement mortar (1:4) for laying floor finished complete all as spd / directed.

M&L 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in floors finished even and fair surface complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2, 75mm thick (40 mm graded stone agg) as in plinth protection complete all as specified and directed.

M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L for Granite 20mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed. Note : (a) The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors Complete all as specified & directed.

Supply & fixing 'E' board (Everest make) 605 x 605 x 4 mm thick white prelaminated set & embosed, reinforced, designer ceiling board tiles of approved texture fixed at all height laid on hot dipped galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be powder coated, white,.the frame work shall comprises of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 x 32 x 300 mm and spaced at 1200 mm center to center fixed to be structural soffits by approved hangers at 1200 mm rawl center, hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and fasteners and screws etc., the last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall, flush fitting of 120 mm long cross tee (with double stiching) to be interlocked between main runners at 600 mm center to center, size 1200 x 600 mm modules, cross tee longer than 600 mm to be supported independently on 600 x 600 mm moduler to be formed by fitting 600 mm long cross tee centrally between the 1200 mm cross tee. Tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19 x 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as directed.

M&L for 12mm thick prelaminated particle board, interior grade prelaminated one side with decorativen choice lamination & other side balancing white lamination fixed with screw to timber/MS frame work complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauze, thickness, including Nainital or similar pattern roof coverings etc complete al as specified and directed..

S&F plain black mild steel sheeting 0.80mm thick in ridge, valley gutter & fascia,drip and straight flashing as directed by Eng-in-charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Complete all as specified and directed.

S&F for wind ties for roof including securingbolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L Walling of random rubble, masonary (harder stones), uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

Rendering 15mm thick as fair faces of bricks in CM 1:4 finished even and smooth without using extra cement using WPC @ 3% of cement.(WPC will be measured and paid separately)

Supply only integral water proofing compound

M&L for 10 mm thick cement plaster as in cement mortar 1:6 on brick or Concrete surface including dubbing coat if required & finishing with surface even and fair complete all as specified and directed(No extra payement will be paid for dubing coat) complete all as specified and directed.

M&L for two coat Cement base paint over and incl a coat of alkali resistant primer on new plastered surface including prepration of surface all as spcefied and directed

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for Rendering 10 mm thick on brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified & directed.

M&L Flush shutters,30mm thick, solid core construction, with particle board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.

S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Eng-in-charge.

S&F Powder coated anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified directed by Eng-in-charge.

S&F Powder coated anodised aluminium frame for door section/ window section/ ventilator section for side hung type shutter /sliding type shutter/fixed type shutter in two or more tracks, including automatic locking handle , rollers and roller plate & fitting arrangement complete all as all as specified and directed by Engineer-in-charge.(Glass pane , hydraulic door closer , plush plate, floor hinges shall be measured and paid separately.

S&F Factory made UPVC three track sliding Window frame having 2 tracks for glass shutter and 1 track for mosquito sash made of upvc profile section of size 73mm x 42mm (wxh) having outer wall thickness of 2.0mm(+/-0.2mm). Sliding glass shutter shall be made of UPVC section of size 55mm x 33mm and sliding wire mesh shutter shall be made of UPVC section of size 40mm x 22mm. All section of the frame, sash, transom & mullion, as applicable, shall be duly reinforced with G/J/U/O shape galvanised mild steel section of required thickness considering structural / wind load requirement. System shall be provided with the suitable upvc bead for glazing of the system & fitted with inner & outer EPDM seal gaskets. Clear Glass of Saint Gobain / Modiguard make with thickness of 4mm and stainless steel wire cloth of 0.19mm nominal dia. All welded joints are to be neatly trimmed & feature grooved/raised nib finish so make the finished product free from all sharp edges & burrs. All the corner / mullion / transom joints of the frame and sash shall be mitered cut & fusion welded without any mechanical joining. System shall have adequate drainage mechanism to permit the escape of water from horizontal member beneath each sealed unit. System is to be provided with proper operating & locking hardware mechanism. Window locking system will be either both side push lock system or semi-circle locking system in centre. Complete window shall be fixed in to the existing pre finished aperture, by drilling and fixing through the outer frame using quality fasteners & silicon glue is applied to fill up the crevice between wall and window frame for leak proof installation including taking existing one complete all as specified.

S&F aluminium anodised barrel tower bolt 200 mm.

Aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S & F in repairs Door closer hydraulically regulated of Aluminium (Extruded section) body designation No.2, universe type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F in repair 20 mm dia decorative type curtain rod with rings and brackets complete and all as specified and directed

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of cement based paint all complete as specified and as directed.

S&F in repairs Bib Cock CP fancy type with wall flange screwed down screwed for iron pipe15mm bore in repiars complete as directed by Engr-in-charge.

S & F in repairs Two way bib cock including taking down existing one Complete all as specified and as directed Cat Par No CQT 23041 of Jaguar or equivalent, complete all as specified and as directed

S & F in repairs CP Hand shower (Health Faucet) with 1M Flexible tube with 8mm dia wall hook with NRV (Back flow preventor) including taking down existing one Complete all as specified and as directed CAT Part No ALD CHR-579 Jaquar or equivalent in Parryware, Cera

S&F in repairs Grating doom 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.

S & F for Toilet paper holder of vitreous china box type fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 Ltrs capacity , low level , white, with inlet , ball valve, float and handle including brackets and flush pipe etc complete all as specified and as direted by Engineer-in-Charge.

S&F for vitrious china wash basin, white flat back size 550x400mm including waste, chain & plug andporeclain stopper and bracket etc. Complete including cutting for and pinning in ends of brackets or errecting bracket and 32mm dia waste fitting brass chromium plated for sink etc;with long screwed shanks and fly nuts,flange end bedded in red lead cement including 32mm dia waiste pipe fitted complete all as specified and directed.

S&F in repirs 20 MM bore dia of pipe Ball brass valves. high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule i complete all as manufactures and all as specified and directed by Engineer- In - charge

S&F in repairs chromium plated angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size.

S&F in repairs soap dish vitreous china white approximate size 100 x 160x90 mm brass screws complete all as specified and directed

S&F in repair 15mm bore Brass CP wall mixer for mixig hot & cold water screwed down , for iron pipe or for brass ferrule complete all as specified and directed.

S&F PVC 'S' trap 110mm all as specified and as directed

S&F in repair waste coupling with waste pipe of PTMT(half or full threaded) .(Minimum weight 32mm-45gms)for WHB complete all as specified and as directed.

S&F in repair waste coupling with waste pipe of PTMT(half or full threaded). (Minimum weight /40mm-60 gms suitable for urinals complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning or removal to store 15mm bore complete all as specified and as directed.

All as per Item No: 166 but for 20 mm bore complete all as specified and as directed.

S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 16 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc complete all as specified and directed.

S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 20 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc etc complete all as specified and directed.

M&L Rotational moulded polythene water storage tank of 500 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed.

M&L Rotational moulded polythene water storage tank of 1000 Ltrs capacity (three layer white colour) cylinderical vertical with closed top including 3 Nos GI check nuts and tank nipple of 25mm bore for inlet and outlet, 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specified in SSR part -I including taking down of old unserviceable tank complete all as specified and directed.

M&L 100mm thick with cement concrete 1:2:4 type B1 (20mm graded aggregate),in floor finished even &smoothwithout using extra cement all as specified and directed

M & L for machine pressed precast concrete interlocking paver block any shape and size with gray cement with no pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid over and complete all as specified and as directed.

M&L for sand cushioning including spreading in layers and rolled consolidated to thickness of 25mm (minimum) for receiving precast PCC interlocking blocks complete all as specified and directed.

S & F Chequered cement concrete coloured tiles 300 x 300 x 25 mm thick, machine pressed heavy duty any pattern/type, chemically treated set jointed and pointed in neat cement slurry as in paths, etc and cut and polished using grey cement and pigments over screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar (1:4) complete all as specified and directed.

M & L Precast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar ( kerb stone) as in PCC 1:3:6 type C1 using 20 mm graded stone aggregate and set in CM 1:6 incl formwork complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with putty or fixed with beads complete all as specified and directed.

Material and labour for provision of new 4mm plain sheet glass ordinary quality and glazed with oil putty area of glass not exc 0.5 sqm each pane complete all as specified and directed.

Supply and fixing Figured glass, pinhead type 3 mm thick with oil putty in squares not exceeding 0.5 Sq. m in each pane, with beads, complete dismantling all as specified & directed complete all as directed.

Material and labour for provision of new 4mm plain sheet glass ordinary quality and glazed with oil putty area of glass exc 0.5 sqm each pane complete all as specified and directed.

S&F Sheet glass,5.50 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane .

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, in repairs all as specified and directed.

M&L Checking of joinery (wooden/steel) iron/ aluminium monger, pelmet box, door springs , drilling work etc requiring carpentry work and carrying out minor repairs such as tightening of screws/ nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/ nails, plug etc to make it functional complete all as specified and as directed by Engineer-in-Charge. Note :- In case any replacement of new handles, Butt hinges, cupboard knobs, floor door stopper and pelmet box shall be measured and paid as supply only. However, the unit rate is deemed to be included for labour element.

M&L Easing of door shutters for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc, Size of door upto 2 Sqm complete all as specified and directed by Engineer-in-Charge.

M&L Easing of window shutters, kitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments , size of window upto 1.5 Sqm. complete all as specified and directed by Engineer-in-Charge

M& L for drilling holes on Granite/Trap stone for bolts, pipes, etc.n. exc 25mm dia, complete all as specified and directed

M& L for drilling holes on Granite/Trap stone for bolts, pipes, etc. exc 25mm dia, n.exc 60 mm dia complete all as specified and directed

M& L for drilling holes on Granite/Trap stone for bolts, pipes, etc. exc exc 60 mm dia, n.exc 100 mm dia complete all as specified and directed

M&L for drilling holes on Lime/Sand stone for bolts, pipes, etc. exc exc 60 mm dia, n.exc 100 mm dia complete all as specified and directed

KRISHNA ENTERPRISES (BID ID -3383734)

NLK Construction (BID ID -3384461)

KSR AND COMPANY (BID ID -3384818)

Neptune Engineers and Builders (BID ID -3382120)

D.R ASSOCIATES (BID ID -3386676)

jk construction (BID ID -3384701)

p.chinnasamy (BID ID -3386682)

T SANJEEV KUMAR (BID ID -3384288)