SPECIAL REPAIR TO BLDG NO P-53 OTM ACCN AT SK LINES IN MIRAN SAHIB UNDER GE JAMMU

Amount

B&R PORTION:- Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and removing unserviceable material exc 100 mtr, complete all as specified.

Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified.

All as per ser Item No 02 above but except brick, complete all specified and directed

RCC nominal mix 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in beams , cantilevers, bressummers, lintel over 1.5 mtr span, complete all as specified.

Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr and reinforcement cut as required to facilitate demolition, complete as specified.

RCC nominal mix 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in slab supported on walls, columns in floors, roofs, landings, canopies, deck slabs, balconies and in shelves, complete all as specified.

Form work to sides and soffits of floor or roof beams, beam haunchings , lintels, cantilevers, shelves including supports, overhangs etc and similar works fair finished surface of concrete, complete all as specified .

Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces of concrete, complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finished surfaces concrete surfaces, complete all as specified and directed.

TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping to columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia, all as specified and directed.

TMT bars, 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

15mm thick cement rendering plaster in CM 1:4 on fair faces of bricks or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified

Preparation & complete removal of existing old treated plastered surfaces of wall and applying two coat of oil emulsion distemper white or tinted shade over and including wall care putty not less than 2mm thick over plastered surface of wall upto 4 storey buildings, complete all as specified.

Preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper, white or tinted shade over and including wall care putty not less than 2mm thick over plastered surface of wall upto 4th storey bldgs, complete all as specified.

Preparation of new plastered surfaces of wall and applying two coats of weather proof exterior emulsion (APEX) paint of any colour over a coat of chalk whitining, complete all as specified & directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing, complete all as specified.

Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

35mm thick factory made wooden panel door framed, panelled shutter with masonite facing boyh side of(two three or four paneldesign as approved) made of solid core using machine field rigid expanded polyurethane foam the the door facing plate shall be 3.2 mm thick complet all as specufied and directed

35mm thick 2nd class hard wood in glazed and Skelton factory made shutters open rebated and prepared to receive glass/wire gauge etc without sash bars edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass/wire mesh etc sizes of members as per clause 8.20(a) of SSR Part-I for door shutters complete all as specified.

Factory made steel windows double shutter 1.25 mm thick box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and 1 mm thick shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs (iv) Cooler window where required (v) 10 mm Square bar as in guard bars.

Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings, cooler stand etc with and incl bending, cutting and welding and embedded in PCC 1:2:4 as necessary of confirming to Fe-290 (Gde E-165) including one shop coat of red oxide primer, complete all as specified.

Pressed steel frame of size 105X60mm for doors as per IS 4351 using PBI Sheet of 1.25 mm thick with one or more rebates including mild steel hinges medium weight 100mm long and 25X3mm flat iron in holdfast and tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc. complete all as specified.

Pressed steel frame of size 125X60mm for doors as per IS 4351 using PBI Sheet of 1.25 mm thick with double rebated including mild steel hinges medium weight 100mm long and 25X3mm flat iron in holdfast and. tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc. complete all as specified.

Plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in back filling of pressed door frame, complete all as specified.

Butt hinges, medium weight, cold rolled mild steel, 100 mm size, complete all as specified.

150mm long aluminium handle, cast type, anodised, complete all as specified.

125mm long aluminium handle, cast type, anodised, complete all as specified.

Mild steel barrel tower bolt, stove enamelled black, with bright bolt of 150mm long, complete all as specified.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of size 125 mm long complete all as specified

250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section and fixed, all as specified and directed.

Second class hard wood small fittings such as brakets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary labour, articles not exceeding 200 cu.cm each complete all as specified

150mm ordinary rat tail Mild steel rod pattern springs including roller and roller plate, complete all as specified.

Galvanized mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

Sheet glass ordinary quality, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) any thickness including cover fillets all as specified & directed

Dismantling of timber scantling 40sqcm and over in section unframed work,as in any position, complete all as specified.

Dismantling of timber scantling as in fillets, rail posts rafters, purlins etc under 40sqcm in section in unframed work,as in any position, complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified.

PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate), for fixing of hold fast, copings, plinth bands bed blocks kerb or mud stops,rounded or chamfered angles and edges, including necessary form work complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 30cm long, diameter of neck 12mm to 20mm all as specified.

Rolled mild steel works as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate/red oxide primer paint (including preparation of surface) before fabrication as directed etc confirming to Fe 410W(Gde E-250), quality 'A', complete, complete all as specified

Steel work in tubular tru-sses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified

Two coat of synthetic enamel paint over a coat of pink primer including preparation of new or previously untreated wooden surfaces of any description, over 10cm width or girth, complete, complete all as specified and directed.

Applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws or L tyoe or J- type or cranked hook bolt, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof fixed with self tapping screws or L-type or Jtype or cranked hook bolt, complete all as specified and directed.

Mild steel flat iron for wind ties for including securing bolts necessary drilling bolting or riveting and similar work conforming to Fe 210 gde E-165 etc complete and fixed all as specified.

All as per item No 51 here-in-before but fixing only complete all as specified and directed.

600x600 mm grid frame of galvanised iron powder coated section incl supply and fixing 4 mm thick non asbestos designer E board and comprising of under mentioned section etc for grid frame (a) Suspended GI main runner 32x24 mm bulb Tee section fixed with 4mm dia GI bar @ 1200 c/c level shall be adjusted with fly/bionet screws. (b) Placed in position cross Tee 600 mm long and 24x26 mm bulb Tee section @ 605 mm c/c using shape and bionet fixing arrangement to secure main runners. (c) Ceiling GI 26x24 mm size bulb section installed 605 mm long in between cross Tee. (d) GI coated angle 24x24 mm fixed with PVC rawl plugs and GI screws to secure with walls. (e) All the fixing details shown on drg No CEPZ/STD/809/07 dt 03-11-2007 and as per manufacturer instructions as approved by GE, complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing all the demolished material outside cantt area, complete all as specified.

25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate as in sub base, complete all as specified and directed.

75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in floor surfaces, complete all as specified and directed.

Screed bed or bedding layer of cement mortar 20 mm thick for laying floor finishing in CM 1:4 & finished the surface even & rough to receive the tile flooring, complete all as specified and directed.

Machine cut kota stone slab flooring 16-18 mm thick as in flooring, treads, plateform etc bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, including cutting, grinding and mirror polishing complete, all as specified and directed.

Machine cut kota stone slab 16-18 mm thick as in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete fixed over & including 10mm thick fair and even plaster in CM 1:4 complete, all as specified and directed.

Factory made precast machine crafted cement concrete M-40 grade antiskid tiles 300X300X25 mm polymer moulded using white cement and pigment laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed

Plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops , rounded or chamfered on edges complete all as specified and as directed by the Engineer in Charge.

PCC 1:3:6 50mm thick type C-1 using 20mm graded crused stone aggregate finished even and smooth without using extra cement as in plinth protection including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight, complete all as specified.

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed.

Non skid ceramic coloured tiles 7mm to 8mm (square/rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white cement and pigment to match the shade of tiles laid over and including15mm screed bed or beading layer in CM 1:4 complete all as specified.

Glazed ceramic coloured tiles (300 x 200 mm ) x 7mm thick as in vertical surface such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 10 mm thick rendering plaster in CM 1:3 to receive tiles, complete all as specfied and directed.

Plain cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary formed work, complete all as specified and as directed by the Engineer in Charge.

Extra for forming fair finished drain or channel 30 cm inner grith in cemnt concrete using extra cement including forms, moulds mitred/stopped ends etc., complete all as specified and directed.

Taking down or up steel tubing and connection 15 mm bore laid in trenches or floors or fixed to walls, complete all as specified and directed.

Taking down or up steel tubing and connection 20 mm bore laid in trenches or floors or fixed to walls, complete all as specified and directed.

Taking down or up steel tubing and connection 25 mm bore laid in trenches or floors or fixed to walls, complete all as specified and directed.

Steel water tubing 15mm bore medium grade galvanized with all fittings like socket,union elbow ,tees short pieces, connectors, diminishing pieces, caps plug etc jointed and fixed to wall, ceiling or laid in floor, complete all as specified.

Steel water tubing 20mm bore medium grade galvanized with all fittings like socket,union elbow ,tees short pieces, connectors, diminishing pieces, caps plug etc jointed and fixed to wall, ceiling or laid in floor, complete all as specified.

Steel water tubing 25mm bore medium grade galvanized with all fittings like socket,union elbow ,tees short pieces, connectors, diminishing pieces, caps plug etc jointed and fixed to wall, ceiling or laid in floor, complete all as specified.

Fixing only old steel water tubing of 15mm bore and connections including cleaning of old tubing in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, complete all as specified.

Fixing only old steel water tubing of 20mm bore and connections including cleaning of old tubing in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, complete all as specified.

Fixing only old steel water tubing of 25mm bore and connections including cleaning of old tubing in new or old position fixed to walls, ceilings and floors etc. including fittings as requiered, complete all as specified.

Dismantling water tanks of any decription/pattern of RCC/PCC/PVC exceeding 500 ltr capacity but not exc 1000 ltrs, complete all as specified.

1000 ltr capacity rotational moulded polyethylene water storage tanks three layers (Cylindrical vertical with closed top) and fixed in position, all as specified in SSR Part-I, complete all as specified and directed. fixed, complete all as specified and directed.

Vitreous china squatting 'Pan' Orrisa pattern 580 x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap, and to flush pipe, anti syphonage pipe etc including PVC 'P' trap set in and including concrete and making good to floor in repair, complete all as specified. Make: Prayag Cat No 4055 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Vitreous china WHB flat back white, size 580 x 400mm including cast iron brackets, waste pipe of 32 mm dia and brass CP waste fitting, complete all as specified and directed.

Vitreous china urinals, bowl type of size 465x355x265mm white with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified. Make: Prayag Cat No 4999 or equivalent cat part No of Make as specified in Appx 'F' here in after.

PVC valve less syphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets 32mm dia PVC flush pipe etc fixed in repairs, complete all as specified. Make: Prayag Cat No-502 or equivalent cat part No of Make as specified in Appx 'F' here in after.

PVC connection 15mm size & 450mm long with PTMT nuts and washer, complete all as specified and directed. Make: Prayag Cat No-323 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Supply and fixing in repairs 32 mm dia bore low dencity PVC flexible pipe for wash hand basin / urinal complete all as specified.

15 mm dia bib tap with flange, cast brass chromium plated fancy type screwed for iron pipes with crutch or butterfly handle, complete all as specified and directed. Make:-Prayag cat part No-7206 or Equivalent cat part of make as specified in Appx 'F' here in after.

15 mm dia stop / angle valve cast copper alloy fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle, screwed at both ends fixed in repairs, complete all as specified and directed. Make: Prayag Cat No-7210 or equivalent cat part No of Make as specified in Appx 'F' here in after.

15 mm dia stop valve cast copper alloy fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or butterfly handle, screwed at both ends, complete all as specified and directed. Make: Prayag Cat No-7218 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed and fly-nuts, screwed for iron pipe of 15mm bore and fixed, complete all as specified and directed. Make: Prayag Cat No 7202 or equivalent cat part No of Make as specified in Appx 'F' here in after.

15mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repair, complete all as specified.

20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repair, complete all as specified.

25mm bore Gun metal globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repair, complete all as specified.

Brass chromiuam plated shower rose 125mm size with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. Make: Prayag Cat No BS-76 or equivalent cat part No of Make as specified in Appx 'F' here in after.

100 mm CI sand cast soil waste and vent pipes sand cast type Make ISI marked in any length with or with out ears with cement joints, laid in trenches or in floors in repairs, complete all as specified.

75 mm CI sand cast soil waste and vent pipes sand cast type Make ISI marked in any length with or with out ears with cement joints, laid in trenches or in floors in repairs, complete all as specified.

100 mm CI bends (any radius) diminishing pieces or taper (larger bore measured) with oval access doors Make ISI marked, complete all as specified.

75 mm CI bends (any radius) diminishing pieces or taper (larger bore measured) with oval access doors. Make ISI marked, complete all as specified.

PVC (SWR) floor trap type 'B' of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed, complete all as specified.

20mm dia PVC ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed of iron pipe and fixed, complete all as specified. Make: Prayag Cat No 152 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated, complete all as specified and directed. Make: Prayag Cat No-BA-20 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Aluminium hat peg sets (solid body) of size 125 mm to 175 mm (06 Nos peg in each set) fixed over wooden board or planks of 2nd class hardwood of size 20 x 40 cm and thickness 20 mm, including fixing arrengement with brick wall through chromium plated brass screws and wooden / plastic cleats complete all as specified and directed

MS PVC coated drapery rods of 20 mm dia complete with coloured conical end balls at both end, dia not less then 50mm and fitted with and including MS/PVC sheeted / powder coated bracket size 150mm made to shape or 75mm dia PVC / PVC coated coloured end wall to wall round block made to shape in male and female pieces as required at site, complete all as specified and directed.

Taking down roof trusses, (above 4 metres & upto 8 metres clear span) coupled rafters or trussed beams, complete all as specified.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed. Note:-Old serviceable switches & MCB shall be taken on charge by the MES for reuse and unsv fittings shall be credited to the contractor.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLSH insulated and unsheathed heavy duty cable drawn in and including concealed PVC rigid conduit medium grade ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/Exhaust fan point controlled by one switch/ bell push or one fan point controlled by one switch through regulator, complete all as specified.

Description all as per item No.106 above but for 3 Pin socket outlet 5 Amps point on independent board with PVC insulated copper conductor cable 1.5sqmm complete all as specified and directed.

Description all as per item No. 106 here in before but for 3 pin socket outlet 6 amp on same board complete all as specified.

Description all as per item No. 106 here in before but for 3 Pin socket outlet 15 Amps point on independent board other switches with with PVC insulated copper conductor cable 2.5sqmm 1100 Volts grade, complete all as specified and directed.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Switch socket multipurpose combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal,complete all as specifed.

Switch socket multipurpose combination 2 in 1, 2 and 3 pin, 5 Amp flush type universal,complete all as specifed.

Fan regulator stepped type (electronic ) flush type for 1200/1400mm sweep AC ceiling fan, complete all as specified. .

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Tube light fitting box type suitable for LED 18-20W tube Rod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18-20LED tube rod 4 feet long complete all as specified and directed. Make:-Crompton Cat Part No:-LTT8-20 for LED tube rod & DMLN1LT8-16 for fittings or Equivalent cat part of make as specified in Appx 'F' here in after. Note :- The LED batten and LED tube rod shall be of same make.

Taking down unsv XLPE cable of any type / size, complete all as specified and as directed, complete all as specified and as directed.

Sub main wiring with single core cable 2x 2.5 sq mm FRLSH insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm rigid PVC conduit (Concealed) medium grade alongwith 1x 1.5 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface, fixed in repair, complete all as specified and directed. Note:-2 wire of 2.5sqmm, 1 wire of 1.5qmm and one run of pvc conduit shall be measured as one unit.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

LED lamp 7W. Make:- Crompton Cat Part No LSB-7W-CDL-BC or Equivalent cat part of make as specified in Appx 'F' here in after.

Sheet metal enclosure factory made distribution board TPN IP 43-'IK 08 with bus bars neutral links blanking plates double door suitable for FP MCCB as incommer and out going SP/TP MCBs 4 ways with and including MCB triple pole neutral 63 Amp with rupturing capacity 10 KA 'C' series 01 No, MCB single pole and neutral 40 to 50 amps 240 volts 10 KA 'C' series 03 Nos, complete all as specified and directed. .Make:-Legrand Cat part No :-5077 45 or equivalent cat part of make as specified in Appx "F" here in after.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 8 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified. Make:- Legrand cat part No-5076 21 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand Cat Part No 4086 09 to 4086 17 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 32/40 amps 240 volts 10 KA 'C' series all as specified. Make:- INDOASIAN Cat Part No 8111152 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4085 87 to 4085 95 or Equivalent cat part of make as specified in Appx 'F' here in after.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion.

Taking down of existing exhaust fan and re-fixing the same after necessary repair / rewinding with replacement of bearing and outer louover shutters, complete all as specified & directed.

Taking down of existing ceiling fan and re-fixing the same with provn of MS hook of suitable size and length and making connection with 3 core copper cable of required size including painting, complete all as specified & directed.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 16 Sqmm x 3.5 core, complete all as specified.

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S A TO Z ENGINEERS

ASHOK KUMAR

M/S OM GUPTA

Kanwal Nain Behl

Tawi Constructions