Rack Steel Adjustable - JSS Specification Rack Steel Adjustable - JSS Specification ( 11 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to defence specification JSS 7105 - 17:2010 (revision No.2) * Frame type perfectly in upright and straight position * Components Blanks for the side- shelves-dividers and kick plate * Shelves fitted At the right angles to the sides and to be parallel to each other * Divider fitted Parallel to the sides and to be at right angle to the shelves * Mode of Supply Assembled Ready To Use * MATERIAL & MATERIAL THICKNESS Material of back/sides/d ividers/shelves Mild steel sheet 1mm thick Grade O-1079 conforming to IS:1079:1994 * Material of Kick plate Mild steel sheet * 1/4 1.25mm thick Grade O-1079 conforming to IS:1079:1994 Material of screw metric hexagon head coarse pitch Black steel 4.6 M6 X 14mm long(5305-002 410) conforming to IS:1363(Part 3):2002 * Nuts metric hexagon Black steel M6(5310-000 547) conforming to IS 1363(part 3):2002 * DIMENSION Overall height ±3mm 1755 * Overall width ±3mm 915 * Overall depth ±2mm 410 * Distance between bottom shelves and floor ±2mm 130 * Distance between bottom shelves and first shelves ±2mm 480 * Distance between first shelves and second shelves ±2mm 460 * Distance between Second shelves and third shelves ±2mm 380 * Distance between third shelves and top shelves ±2mm 305 * Divider at a distance of 305 * COLOUR AND FINISHING Colour Paint RFU priming G.S brushing/spraying red oxide of Iron zinc chromate ISC 446 conforming to IS 2074:1992 * Finish Paint RFU finishing. war equipment air-drying brushing/spraying with O.G.scamic No.314 conforming to IS:8982:1991 * MISC Holes/slots In the sides/shelves dividers/back and kick plate to be accurately drilled/punched * Size and number of holes 22 numbers of 7mm size holes on both side to suit the shelves * 2/4 Holes/slots in the various components Should be adequate * Ends of the sides/shelves/dividers and kick plate To be double fold after cutting * Bolts/Screws All components secured in position by means of bolts/screws * Number of divider 2 Numbers in each shelves parallel to the sides * Dressing of Components free from crack/surface free from distortion/no burrs in holes * CERTIFICATION Test reports to be furnished to buyer on demand NO * WARRANTY Warranty period in number of years 1 1

Rack Steel Adjustable - JSS Specification Rack Steel Adjustable - JSS Specification ( 11 ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Allowed Values GENERIC Conformity to defence specification JSS 7105 - 17:2010 (revision No.2) * Frame type perfectly in upright and straight position * Components Blanks for the side- shelves-dividers and kick plate * Shelves fitted At the right angles to the sides and to be parallel to each other * Divider fitted Parallel to the sides and to be at right angle to the shelves * Mode of Supply Assembled Ready To Use * MATERIAL & MATERIAL THICKNESS Material of back/sides/d ividers/shelves Mild steel sheet 1mm thick Grade O-1079 conforming to IS:1079:1994 * Material of Kick plate Mild steel sheet * 1/4 1.25mm thick Grade O-1079 conforming to IS:1079:1994 Material of screw metric hexagon head coarse pitch Black steel 4.6 M6 X 14mm long(5305-002 410) conforming to IS:1363(Part 3):2002 * Nuts metric hexagon Black steel M6(5310-000 547) conforming to IS 1363(part 3):2002 * DIMENSION Overall height ±3mm 1755 * Overall width ±3mm 915 * Overall depth ±2mm 410 * Distance between bottom shelves and floor ±2mm 130 * Distance between bottom shelves and first shelves ±2mm 480 * Distance between first shelves and second shelves ±2mm 460 * Distance between Second shelves and third shelves ±2mm 380 * Distance between third shelves and top shelves ±2mm 305 * Divider at a distance of 305 * COLOUR AND FINISHING Colour Paint RFU priming G.S brushing/spraying red oxide of Iron zinc chromate ISC 446 conforming to IS 2074:1992 * Finish Paint RFU finishing. war equipment air-drying brushing/spraying with O.G.scamic No.314 conforming to IS:8982:1991 * MISC Holes/slots In the sides/shelves dividers/back and kick plate to be accurately drilled/punched * Size and number of holes 22 numbers of 7mm size holes on both side to suit the shelves * 2/4 Holes/slots in the various components Should be adequate * Ends of the sides/shelves/dividers and kick plate To be double fold after cutting * Bolts/Screws All components secured in position by means of bolts/screws * Number of divider 2 Numbers in each shelves parallel to the sides * Dressing of Components free from crack/surface free from distortion/no burrs in holes * CERTIFICATION Test reports to be furnished to buyer on demand NO * WARRANTY Warranty period in number of years 1 1

2

3

4

5 * Bold specifications are the golden parameters. Consignees and Quantity S.No. Consignee Address Quantity Delivery Days 1 Pankaj Kumar Bansal 122001

sector-9a 11 15