GE/CHM-117/2025-2026 REPAIR AND POLISHING TO HARD BED, SOFA SET AND WOODEN FURNITURE UNDER BSO GE CHANDIMANDIR

Repair To Bed Ply Top, [FD-246/247]

Supply & fixing head board (legs, short rail and horizontal & vertical rails) shall be made out of Ist class hard wood Shisham and vertical members of the frame shall be made out of Ist class Deodar wood), frame covered with 4 mm thick ply wood one side teak face and edges covered with teak wood beading, exposed wooden surfaces duly polished including dismantling of existing unserviceable head board all as shown on drawing, complete all specified and directed.

All as per serial item No 1.01 herein before but foot board –ditto-

Supply & fixing long rail made out of Ist class hard wood (shisham) duly polished including dismantling of existing unserviceable long rail, all as shown on drawing complete all specified and directed.

Supply & fixing short rails made out of Ist class hard wood (shisham) duly polished including dismantling of existing unserviceable short rail, rest all as shown on drawing complete all specified and directed.

All as per serial item No 1.04 herein before but stiffner –ditto-

Removing of unserviceable teak face plywood of Head board of bed ply top and supply and fixing new ply made to 4 mm thick teak face plywood commercial of suitable size including 12 mm dia half cut teak wood beading of both side of foot board, complete all as specified, direction and shown on drawing.

Removing of unserviceable teak face plywood of foot board of bed ply top and supply and fixing new ply made to 4 mm thick teak face plywood commercial of suitable size including 12 mm dia half cut teak wood beading of both side of foot board, complete all as specified, direction and shown on drawing.

Removing of unserviceable flat iron of bed ply top and supply and fixing new flat iron of size 35 x 5 x 140 mm long, bents to right angle on each corners of bed, complete all as specified, direction and shown on drawing. (Each flat iron support shall be measured as one unit).

Supply & fixing 12mm thick plywood on top of bed ply wood, of size 1980mm x 910mm commercial to be fixed with appropriate size of screws including dismantling of existing unserviceable top, all as shown on drawing complete all specified and directed.

Repair To Table Dressing Gents, [FD-230]

Dismantling / taking out carefully existing broken top/ bottom of table dressing gents of any description in any position and supply & fixing new top of table made out of 18mm thick pre-laminated MDF board both teak face laminated including grade exterior, grade I including 6 mm thick teak wood beading made to shape fixed in position all as shown on drawing, complete all specified and directed.

All as per serial tem No 2.01 here-in before but supply and fixing in replacement sides / middle portion made out of 12mm thick pre-laminated MDF board both teak face laminated, exterior grade including 6mm thick teak wood beading made to shape fixed in position all as shown on drawing, complete all specified and directed.

All as per serial tem No 2.01 here-in before but supply and fixing in replacement back of box made out of 12mm thick 1st class hard wood shisham plank including key plate made to shape fixed in position and applying a coat of french polish after filling of wood filler and cleaning of surface, complete all specified and directed.

All as per serial tem No 2.01 here-in before but supply and fixing in replacement drawer made out of 18mm thick pre-laminated MDF board both teak face laminated, exterior grade with 6mm thick teak wood beading and 12 & 6mm thick plywood including Knob made to shape & size, rest all as shown on drawing, complete all specified and directed.

All as per serial tem No 2.01 herein before but supply and fixing in replacement chromium plated knob 35 mm dia and 24mm long all as shown on drawing, complete all specified and directed.

All as per serial tem No 2.01 herein before but supply and fixing in replacement mirror of size 380mm x760mm x5mm thick all as shown on drawing, complete all specified and directed.

All as per serial tem No 2.01 herein before but supply and fixing in replacement back Support made out of 25mmx35mm teak wood member of sizes all as shown on drawing, complete all specified and directed.

All as per serial tem No 2.01 here-in before but supply and fixing in replacement of mirror frame made out of teak wood, 6 mm thick plywood BWP including key plate made to shape & size, rest all as shown on drawing, complete all specified and directed.

Repair To Table Dressing Ladies, [FD-251]

Dismantling / taking out carefully existing broken top of table dressing ladies of any description in any position and supply and fixing new top table of 18mm thick pre-laminated MDF board both side laminated exterior grade, grade I including 6mm thick teak wood beading alround made to shape fixed in position all as shown on drg, complete all specified and directed.

All as per serial tem No 3.01 here in before but supply and fixing in replacement sides of 18mm thick pre-laminated MDF board both side teak faced laminated exterior grade including 6mm thick teak wood beading alround made to shape fixed in position all as shown on drg, complete all specified and directed

All as per serial tem No 3.01 here in before but supply and fixing in replacement of bottom made out of 18mm thick pre-laminated MDF board both side laminated exterior grade including 6mm thick teak wood beading made to shape fixed in position all as shown on drg, complete all specified and directed.

All as per serial tem No 3.01 here in before but supply and fixing in replacement back made out of 12mm thick BWP ply wood made to shape fixed in position all as shown on drg, complete all specified and directed.

All as per serial tem No 3.01 hereinbefore but supply and fixing new drawer made of 18mm thick prelaminated MDF board , 6 & 12mm thick plywood including Knob, complete rest all as shown on drawing, complete all specified and directed.

All as per serial tem No 3.01 chromium plated knob 35mm dia 24mm length all as shown on drawing, complete all specified and directed.

All as per serial tem No 3.01 hereinbefore but supply and fixing new glass shutter made out of 5mm thick best quality glass including round of edges of all size, all as shown on drawing, complete all specified and directed.

All as per serial tem No 3.01 herein before but supply and fixing in replacement mirror of size 1220mm x 366mm x 5mm thick all as shown on drawing, complete all specified and directed.

All as per serial tem No 3.01 herein before but supply and fixing in replacement mirror frame made of 1st class teak wood including 6 mm thick BWP ply wood, all as shown on drawing, complete all specified and directed.

All as per serial tem No 3.01 herein before but supply and fixing in replacement back support of mirror frame made out of 45mm x 40mm teak wood of sizes all as shown on drawing, complete all specified and directed.

All as per serial tem No 3.01 herein before but supply and fixing in replacement base frame legs with long batten made out of 1st class teak wood, all as shown on drawing, complete all specified and directed.

Repair To Sofa Set 4/5 seater, [FD-281/373] Removing the following unserviceable wooden parts from sofa set to seat five, four and three and supply and fixing new wooden parts made out of 1st class teak wood as per size given in the drg to the existing sofa set all as specified and directed.

Legs of sofa chair 70 x 35 x 530 mm

Arms rest of sofa chair 70 x 35 x 745 mm

Wooden bearer 40 x 40 x 580 mm

Wooden batten 50 x 20 x 580 mm

Wooden rails 35 x100 x 670mm

Wooden frame for back 35 x 70 x 540mm

Wooden rail to support back frame 30x50x580mm

Wooden bearer 40x40x1660mm

Wooden rail 35x100x1660mm

Wooden frame for back 35 x 70 x 1600 mm

Wooden rail to support back frame 35x70x1660 mm

Removing the existing unserviceable cushion of sofa 4/5 seater and supply and fixing new foam cushion of 100mm thickness (40 density), size of cushion shall be 530mm x 560mm x 100mm. Make Sleep Well/ Curlon/ Duro Foam as approved for seat and back of sofa set duly covered with long cloth tapestry cloth of worth not less than Rs. 350/- per meter and shade of sample approved by GE complete all specified, directed and all as shown on drawing.

Repair To Chair Executive Revolving [FD -MAP/TP ]

Removing old unserviceable worn out tapestry cloth from seat and back of chair executive revolving pattern and supply & fixing new tapestry cloth (cost of tapestry cloth shall not be less than Rs 300/- per meter) of existing shape and quality including whereever required PVC lipping all around, complete all as specified and directed.

Removing old unserviceable worn out cushions from seat and back of chair executive revolving of and supply & fixing new PU cushions of 75 mm thick of 40 density of existing size and shape, complete all as specified and directed. Make of Cushion: Sleepwell / Kurlon / Duro form

Removing old unserviceable worn out ply from seat and back of each chair executive revolving of trade pattern and supply & fixing new ply 12mm thick hot press plywood of existing size and shape, complete all as specified and directed.

Removing old unserviceable broken caster wheels from chair revolving and supply & fixing new caster wheels of existing size and shape, complete all as specified and directed.

Removing old unserviceable broken tilting bolts from chair revolving and Supply & fixing new tilting bolts of existing size and shape in best quality, complete all as specified and directed.

Removing old unserviceable handle from chair revolving and supply & fixing new handle including required nut and bolts of existing size and shape in best quality, complete all as specified and directed.

Removing old unserviceable hydraulic from chair executive and supply & fixing new hydraulic of existing shape and size, complete all as specified and directed. Make (Godrej / Geeken)

Removing old unserviceable / broken base of chair revolving and supply & fixing new base including complete assembly and caster wheels of existing size and shape in best quality, complete all as directed by Engineer-in-Charge.

Repair To Table Dining 6 & 8 Persons, [ FD-273/376] Dismantling / taking out carefully existing broken parts of table dining 6/8 pers and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of table dining 8 pers made out of 18mm thick prelaminated MDF board, both side laminated exterior grade, grade I with 6mm thick teak wood beading alround, complete all specified, directed and all as shown on drawing.

Top of table dining 6 pers made out of 18mm thick prelaminated MDF board, both side laminated exterior grade, grade I with 6mm thick teak wood beading alround. complete all specified, directed and all as shown on drawing.

Teak wood legs

Teak wood long rail

Teak wood short rail

Teak wood stiffener

Teak wood bracket (triangular) of size 100mm & 30mm thick

PVC Rubber Shoes(50 x 25mm) of best quality

REPAIR TO TABLE CENTRE/TWO TIER : [FD-274] Dismantling / taking out carefully existing broken parts of table centre and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of table centre made out of 18mm thick prelaminated MDF board, both side teak face laminated, exterior grade, grade I with 6mm thick teak wood beading alround, Complete all specified, directed and all as shown on drawing.

Bottom tier of table centre made out of 18mm thick prelaminated MDF board, both side teak face laminated, exterior grade with 6mm thick teak wood beading alround. Complete all specified, directed and all as shown on drawing.

Teak wood legs

Teak wood long rail

Teak wood short/ Bottom rail

Teak wood centre stiffener

PVC Rubber Shoes of best quality in white colour (25 x 25mm).

Repair To Table Bed Side, [FD-276] Dismantling / taking out carefully existing broken parts of table bed side and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of table bed side made out of 18mm thick prelaminated MDF board, both side teak face laminated, exterior grade with 6mm thick teak wood beading, Complete all specified, directed and all as shown on drawing.

Side (left/right) of table bed side made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade with 6mm thick teak wood beading, Complete all specified, directed and all as shown on drawing.

Shelf and bottom made out of 18 mm thick prelaminated MDF board both side teak face laminated, exterior grade with 6mm thick teak wood beading, complete all specified, directed and all as shown on drawing.

Back side made out of 6mm thick plywood commercial type BWP grade, complete all specified, directed and all as shown on drawing.

Repair To Table Writing, [FD-275] Dismantling / taking out carefully existing broken parts of table writing and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of table writing made out of 18mm thick prelaminated MDF board, both side teak face laminated, exterior grade, grade I with 6mm thick teak wood beading Complete all specified, directed and all as shown on drawing.

Side (left/right) of box of table writing made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade with 6mm thick teak wood beading. Complete all specified, directed and all as shown on drawing.

Bottom of box of table writing made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade with 6mm thick teak wood beading. Complete all specified, directed and all as shown on drawing.

Back side plywood of box of table writing including 6mm thick BWP plywood in back side complete all specified, directed and all as shown on drawing.

Front side of drawer of table writing made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade with 6mm thick teak wood beading including recessed handle. Complete all specified, directed and all as shown on drawing.

Drawer made out of 1st class teak wood, 18mm thick prelaminated MDF board both side teak face laminated, exterior grade with 6mm thick teak wood beading, 12/6 mm thick BWP plywood including recessed handle complete all specified, directed and all as shown on drawing.

Shelf of table writing made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade with 6mm thick teak wood beading. Complete all specified, directed and all as shown on drawing.

Shutter with lock of table writing made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade with 6mm thick teak wood beading including brass lock, recessed handle & Piano hinges. Complete all specified, directed and all as shown on drawing.

Box of table writing made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade with 6mm thick teak wood beading, including 6mm thick BWP plywood in back side & shutter complete all specified, directed and all as shown on drawing.

Teak wood leg

Teak wood top long rail

Teak wood top short/side rail

Bottom side stiffener made out of teak wood

Bottom long stiffener made out of teak wood

Recessed Handle as per drg.

PVC Rubber Shoes of best quality in white colour (25 x 25mm).

Repair To Peg Table, [FD-277/384] Dismantling / taking out carefully existing broken parts of peg table and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of peg table made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade, grade I with 6mm thick teak wood beading Complete all specified, directed and all as shown on drawing.

Teak wood legs

Teak wood long rail

Teak wood short/Bottom rail

Teak wood stiffener (side/centre)

PVC Rubber Shoes of best quality in white colour (25 x 25mm).

Repair To Table 900 X 600mm Without Drawer, [FD-284] Dismantling / taking out carefully existing broken parts of table without drawer and supply & fixing fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of table without drawer made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade, grade I with 6mm thick teak wood beading. Complete all specified, directed and all as shown on drawing.

Teak wood leg

Teak wood long rail

Teak wood short rail

Bottom side stiffener made out of 1st class hard wood teak wood

Teak wood bracket (triangular) of size 100mm & 30mm thick

PVC Rubber Shoes of best quality in white colour (25 x 25mm).

Repair To Bin Multipurpose, [FD/E6/MAP/09] Dismantling / taking out carefully existing broken parts of Bin Multiporpose and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade, grade I with 6mm thick teak wood beading.

Bottom made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading.

Shutter made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade with 6mm thick teak wood beading including D type SS handle & Piano hinges. Complete all specified, directed and all as shown on drawing.

Side made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading.

Shelf made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading.

Partition made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading.

Drawer shall be made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading alround including D Type SS handle , Complete all specified, directed and all as shown on drawing.

Back ply made out of 12mm thick teak face ply BWP type, made to shape Complete all specified, directed and all as shown on drawing.

Teak wood long frame Base

Magnet catcher of best quality

Piano type hinges mild steel, bright finish, width of flap 30mm

Handle 75mm long 'D' Type Stainless steel

Repair To Teapoy Wooden, [ FD- 278] Dismantling / taking out carefully existing broken parts of Teapoy wooden and supply & fixing new parts fixed fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of teapoy wooden made out of 18mm thick prelaminated MDF board, both side teak face laminated, exterior grade including 6mm thick teak wood beading alround.

Teak wood leg

Teak wood front rail / rear rail

Teak wood side/ bottom rail

Teak wood center stiffener

PVC Rubber Shoes of best quality in white colour (25 x 25mm).

Repair To Side Board, [FD-241,371] Dismantling / taking out carefully existing broken parts of Side board and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade, grade I with 6mm thick teak wood beading Complete all specified, directed and all as shown on drawing.

Bottom made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading Complete all specified, directed and all as shown on drawing.

Side made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading alround Complete all specified, directed and all as shown on drawing.

Shelf made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading Complete all specified, directed and all as shown on drawing.

Partition made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading Complete all specified, directed and all as shown on drawing.

Piano type hinges mild steel, bright finish, width of flap 30mm Complete all specified

Shutter made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading including brass knob alround Complete all specified, directed and all as shown on drawing.

Drawer shall be made out of 18mm thick prelaminated MDF board both side teak face laminated exterior grade with 6mm thick teak wood beading alround, 12mm & 6mm commercial thick BWP plywood including Brass Knob, Complete all specified, directed and all as shown on drawing.

Back made out of 6mm thick commercial ply BWP type, made to shape, duly polished.

Brass knobs 25mm dia

Magnet catcher of best quality

Brass six lever lock with duplicate key of approved best quality.

Teak wood leg.

Bottom long stiffener made out of 1st class hard wood teak wood.

Bottom short stiffener made out of 1st class hard wood teak wood.

Repair To Table Bed Side (MAP) [FD/E6/MAP/15] Dismantling / taking out carefully existing broken parts of Table bed side Map and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of Table Bed side (MAP) made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround.

Side made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround.

Upper drawer (front side) made out of 18 mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround including D type SS handle.

Lower drawer (Front side) made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround including D type SS handle.

Complete bottom drawer made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround including D type SS handle.

Bottom of drawer made out of 6mm thick commercial BWP plywood including duly primer.

Back made out of 6mm thick commercial ply BWP type, made to shape, duly primer.

Handle 75mm long 'D' Type Stainless steel

Repair To Table Dining 1200mmx 900mm x760mm / 4 Persons [ FD-273 / FD/MAP-II/03 ] Dismantling / taking out carefully existing broken parts of table dining and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Teak wood leg

Teak wood long rail

Teak wood short rail

Teak wood stiffener

Flat Iron Bracket of size 30 x 5x 150mm long and bend in right angle including black enamelled paint.

PVC Rubber Shoes of best quality in white colour (50 x 25mm).

Table top made out of 18mm thick prelaminated MDF board, both side teak face laminated exterior grade with 6mm thick teak wood beading alround complete all as specified and directed.

Chair Dining With Cushion [FD/E6/MAP/10/ 10(R)] Dismantling / taking out carefully existing broken parts of table dining and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Teak wood Rear leg

Teak wood Front leg

Teak wood Rail (Front / Side/ Rear)

Teak wood Stiffener (Side/ Center)

Teak wood Back rest

Teak wood Vertical strips

PVC Rubber Shoes of best quality

Seat ply made of 12 mm ply wood commercial BWP type.

Seat Cushion made of 75 mm thick, 40 density complete all specified, directed and all as shown on drawing.

Seat tapestry cloth of worth not less than Rs.300/- per meter of quality and shade of sample approved by GE incluing back side markeen cloth complete all specified and directed as shown on drawing.

REPAIR TO TABLE COMPUTER (MAP) FD/E6/MAP/03 Dismantling / taking out carefully existing broken parts of table computer and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of table computer made out of 18mm thick prelaminated MDF board, both side laminated exterior grade, grade I with 2mm thick PVC beading alround complete all as specified and directed.

Shelves, bottom shelves of table computer made out of 18mm thick prelaminated MDF board, both side laminated exterior grade, grade I with 2mm thick PVC beading alround complete all as specified and directed

Key board of table computer made out of 18mm thick prelaminated MDF board, both side laminated exterior grade grade I with 2mm thick PVC beading alround complete all as specified and directed

Drawer of table computer made out of 18mm thick prelaminated MDF board, both side laminated exterior grade grade I with 2mm thick PVC beading alround complete all as specified and directed

Taking out old unserviceable frame of table computer and Supply and fixing new frame of 75x25 mm square pipe of wall thickness not less than 1.6mm complete all as specified and directed

Taking out old unserviceable channel from table computer and Supply and fixing new channel of existing size in approved quality complete all as specified and directed.

Taking out old unserviceable Knob/ handle from table computer and Supply and fixing new brass Knob/ handle of existing size in best quality complete all as specified and directed.

Taking out old unserviceable Shoe and cover from table computer and Supply and fixing new shoe and cover in best quality complete all as specified and shown on drawing.

Repair To Chair Writing (MAP) [FD/E6/MAP/12]

Removing old unserviceable worn out cushions from seat and back of chair writing (MAP) and supply & fixing new PU cushions of 50mm thick of 40 density of existing size and shape, complete all as shown on drawing, specified and directed.

Removing old unserviceable worn out tapestry cloth from seat and back of chair writing (MAP) and supply & fixing new tapestry cloth (cost of tapestry cloth shall not be less than Rs 300/- per meter) of existing shape and quality including PVC lipping all around, complete all as shown on drawing, specified and directed.

Removing old unserviceable broken frame of the chair writing and Supply & fixing new the frame of the chair shall be of MS tubular frame powder coated, cantilever type of size 25mmx10mm in section with 8 x 3mm MS Flat Iron of existing size and quality, complete all as shown on drawing, specified and directed.

Removing old unserviceable worn out old seat ply from chair writing (MAP) and supply & fixing new seat made of 12 mm thick hot press plywood in proper size and shape complete all as shown on drawing, specified and directed.

Removing old unserviceable worn out old back ply from chair writing (Map) and supply & fixing new seat made of 12 mm thick hot press plywood in proper size and shape complete all as shown on drawing, specified and directed.

Removing old unserviceable worn out old arms rest from chair writing (Map) and supply & fixing new arm rest in one piece made of black integral skin polyurethane in proper size and shape complete all as shown on drawing, specified and as directed.

Removing old unserviceable worn out old rubber stoper (shoe) from chair writing (Map) and supply & fixing new PVC stopper in white colour in superior quality in proper size and shape complete all as shown on drawing, specified and directed.

M & L for spot welding of broken joint 25mm to 75mm long and and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded suface complete all as specified and shown on drawing.

Steel portion of chair shall be painted with a coats of synthetic enamel paint of black colour over a coat of primer whereever required complete all as specified and directed.

Repair To Table Dining 6 Persons,Make Godrej, M. No. T-104 Dismantling / taking out carefully existing broken parts of table dining 6 pers and supply & fixing new parts fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of table dining 3 Pers 18/19mm thick prelaminated MDF board with 50mm thick teak wood beading alround complete all as specified and directed.

L Shaped legs

Long/side rail

Short rail

PVC Rubber Shoes of best quality

Repair To Teapoy Verandah (MAP) [FD/E6/MAP/17]

Taking out old unserviceable top of teapoy verandah and supply and fixing new top made of 18mm thick pre-laminated MDF board exterior grade, grade I with alround 6mm thick teak wood beading duly polished as shown on drg complete all as specified and directed.

Spot welding of broken joint 25mm to 75mm long and and applying a coat of synthetic enamel paint over a coat of red oxide primer after preparation of welded suface complete teapoy Verandah all as specified and shown on drawing.

Taking out old unserviceable leg of teapoy verandah and supply and fixing new leg made of 18mm Sq MS pipe having 1.6mm wall thickness as shown on drg complete all as specified and directed.

Preparation of old painted surfaces of the teapoy verandah and applying one coat of black synthetic enamel paint Ist quality to steel surfaces as shown on drg complete all as specified and directed.

Taking out old unserviceable shoe of teapoy verandah and Supply and fixing in new PVC hard rubber shoes of best quality as shown on drg complete all as specified and directed.

Repair To Chair Computer, [TP/ Godrej]

Removing old unserviceable worn out tapestry cloth from seat and back of chair Computer pattern and supply & fixing new tapestry cloth (cost of tapestry cloth shall not be less than Rs 300/- per meter) of existing shape and quality including whereever required PVC lipping all around, complete all as specified and directed.

Removing old unserviceable worn out cushions from seat and back of chair computer of and supply & fixing new PU cushions of 75 mm thick of 40 density of existing size and shape, complete all as specified and directed.

Removing old unserviceable worn out ply from seat and back of each chair computer of trade pattern and supply & fixing new ply 12mm thick hot press plywood of existing size and shape, complete all as specified and directed.

Removing old unserviceable broken caster wheels from chair computer and supply & fixing new caster wheels of existing size and shape, complete all as specified and directed.

Removing old unserviceable broken tilting bolts from chair computer and Supply & fixing new tilting bolts of existing size and shape in best quality, complete all as specified and directed.

Removing old unserviceable handle from chair computer and supply & fixing new handle including required nut and bolts of existing size and shape in best quality, complete all as specified and directed.

Removing old unserviceable hydraulic from chair computer and supply & fixing new hydraulic of existing shape and size, complete all as specified and directed. Make (Godrej / Geeken)

Removing old unserviceable / broken base of chair computer and supply & fixing new base including complete assembly and caster wheels of existing size and shape in best quality, complete all as directed by Engineer-in-Charge.

Repair To Chair Mat Finish (MAKE SUPREME/ORNATE), TP

Taking out old unserviceable worn out Tepastry Cloth, foam & 2mm fibre seat from chair mat finish and supply & fixing new 35mm thick PU cushion of 40 density duly fixed on 2mm Fibre seat covered with best quality tapestry cloth (cost of tapestry cloth shall not be less than Rs 300/- per meter) of existing shape and size including fixed with nut and bolt on chair, complete all as specified and directed.

Taking out old unserviceable worn out Tepastry Cloth , foam & 2mm fibre back from chair mat finish and supply & fixing new 25mm thick PU cushion of 40 density fixed on 2mm Fibre back duly covered with best quality tapestry cloth of existing shape and size including fixed with nut and bolt on chair, complete all as specified and directed.

Repair To Almirah Mess Utensil, [FD- 93(M)]

Supply and fixing in replacement of old unserviceable shutter from Almirah Mess Utensil with new shutter made of 18 mm thick prelaminated MDF board, both side laminated, exterior grade, grade I including 6mm thick first class hard wood teak wood beading alround with piano hinges and SS handle 100mm long in D shape of existing shape and size, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement of old unserviceable shelf from Almirah Mess Utensil with new shelf made out of 18 mm thick prelaminated MDF board both side laminated exterior grade including 6mm thick first class hard wood teak wood beading of existing shape and size, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement of old unserviceable back ply from Almirah Mess Utensil with new plywood made of 12 mm thick plywood, fixed with headless nails, of existing shape and size, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement of old unserviceable sides from Almirah Mess Utensil with new side (left or right) made of 18 mm thick prelaminated MDF board , both side laminated including 6mm thick first class hard wood teak wood beading of existing shape and size, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement of old unserviceable bottom from Almirah Mess Utensil with new bottom made of 18 mm thick prelaminated MDF board including 6mm thick first class hard wood teak wood beading of existing shape and size, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement of old unserviceable top from Almirah Mess Utensil with new Top made of 18 mm thick prelaminated MDF board with both side decorative including 6mm thick first class hard wood teak wood beading alround the top of existing shape and size, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement of old unserviceable Leg from Almirah Mess Utensil with new legs with long batten made out first class wood teak wood, of existing shape and size, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement of old unserviceable catcher from Almirah Mess Utensil with new Magnet catcher of best quality, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement of old unserviceable handle from Almirah Mess Utensil with new SS handle 100mm long in D Shape, complete all as shown on drawing, specified and directed.

Repair To Table 900 X 900mm [FD-291] Dismantling / taking out carefully existing broken parts of table 900 x 900mm and supply & fixing fixed in replacement all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Top of table 900 x 900mm made out of 18mm thick prelaminated MDF board both side teak face laminated, exterior grade, grade I with 6mm thick teak wood beading. Complete all specified, directed and all as shown on drawing.

Teak wood leg

Teak wood long/short rail

Bottom side stiffener made out of 1st class hard wood teak wood

Teak wood bracket (triangular) of size 100mm & 30mm thick

PVC Rubber Shoes of best quality in white colour (25 x 25mm).

Repair To Trestle Store Room Wooden, [FD- 86 (M)]

Removing old unserviceable members of size 100mm x 100mm and 2440mm long and supply & fixing new one of the same size and length of Sal wood duly finished complete all as specified and shown on drawing.

Removing old unserviceable members of size 60mm x 100mm & 600mm long and supply & fixing new one of same size and length of Sal wood duly finished complete all as specified and shown on drawing.

Removing old unserviceable members of size 60mm x 100mm & 2040mm long and supply & fixing new one of same size and length of Sal wood duly finished complete all as specified and shown on drawing.

Removing old unserviceable legs of size 100mm x 100mm & 405mm long and supply & fixing new one of same size and length of Sal wood duly finished complete all as specified and shown on drawing.

Material and labour for treating trestle store room wooden with one coat of creosote oil on old surfaces and providing three coats to newly provided members after preparing the old and new surfaces respectively complete all as specified and directed.

Repair to Rack 6'x2'x6' wooden , TP/ FD-51

Removing old unserviceable legs of rack wooden and supply & fixing with new leg of Sal wood of size 65 x 65 x 1800 mm long duly finished of existing shape and size, complete all as shown on drawing, specified and directed.

Removing old unserviceable shelf of rack wooden and supply & fixing new shelf of Sal wood of size 25 x 615 x 1830 mm duly finished of existing shape and size, complete all as shown on drawing, specified and directed.

Removing old unserviceable rail of rack wooden and supply & fixing new rail of sal wood of size 50 x 25 & 510 mm length of duly finished of existing shape and size, complete all as shown on drawing, specified and directed.

Removing old unserviceable cross stiffner of rack wooden and supply & fixing new stiffener of sal wood of size 50 & 25 x 2500 mm duly finished of existing shape and size, complete all as shown on drawing, specified and directed.

Material and labour for spray painting to rack wooden with one coat of synthetic enamel paint of Grey colour first quality colour, inside and outside including putty work and smoothening of surfaces complete all as specified and directed.

Repair To Desk Stand Lecture, [FD 125]

Supply and fixing in replacement of front side of Desk stand lecture with new side made of 6mm thick teak face plywood, BWP grade of existing shape and size, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement of of Side (Left/ Right) of Desk lecture stand with new side made of 6mm thick teak face plywood, BWP grade of existing shape and size, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement top of Desk lecture stand with new top made of 6mm thick teak face plywood with 12mm thick plywood, BWP grade in single piece including 6mm thick TW edging alround of existing shape and size, complete all as shown on drawing, specified and directed.

Supply and fixing in replacement upper Shelf/ lower Shelf of Desk lecture standwith new shelf made of 6mm thick teak face plywood with 12mm thick plywood, BWP grade including 6mm thick TW edging alround of existing shape and size, complete all as shown on drawing, specified and directed.

CHAIR WOODEN BOTTOM, Drg No. FD-285 Dismantling / taking out carefully existing broken parts of chair wooden bottom and supply & fixing new parts fixed in replacement in position made out of Ist class hard wood (teak wood) all as shown in drg, preparing and polishing new parts to match the existing shade complete all as specified and directed as follows :-

Rear leg

Front leg

Rail (Front/ Rear/ Side)

Back rest

Stiffener (side/ Centre)

Seat made of 6,mm ply wood commercial BWP type

PVC Rubber Shoes of best quality

Repair to Hot Case Large (FD-364)

Supply and fixing in replacement of shutter of hot case large with new shutter made of 18mm thick prelaminated MDF board exterior, grade I ISI marked with aluminium anodized sheet 22 guage with approved knob including 6 mm thick first class teak wood beading made to shape fixed in position all as shown on drawing, complete all specified and directed.

Supply and fixing in replacement of back of hot case large with new back made of 18mm thick prelaminated MDF board exterior, grade I ISI marked with aluminium anodized sheet 22 guage with approved knob including 6 mm thick first class teak wood beading made to shape fixed in position all as shown on drawing, complete all specified and directed.

Supply and fixing in replacement of side with new side made of 18mm thick prelaminated MDF board exterior, grade I ISI marked with aluminium anodized sheet 22 guage with approved knob including 6 mm thick first class teak wood beading made to shape fixed in position all as shown on drawing, complete all specified and directed.

Supply and fixing in replacement of broken shelf with new shelf made of 12 x 3mm thick flat iron welded 12mm dia rod in frame of existing shape and size including white paint over a coat of red oxide, complete all specified and directed.

Supply and fixing in replacement of broken top with new marble top of 25mm thick marble stone slab slightly rounded / chamfered on all edged of existing shape and size , complete all specified and directed.

Supply and fixing in replacement of broken leg with new leg with long batten of existing shape made of teakwood pf bes quality of existing shape and size , complete all specified and directed.

Material and labour for spray painting to Hot case large with one coat of synthetic enamel paint of white colour first quality colour, inside and outside including putty work and smoothening of surfaces complete all as specified and directed.

Material and labour for polishing of following wooden furniture articles with French polish high glossy finished (applying one or more coats) of approved quality including preparation of the surfaces by putty work and smoothening the surfaces with emery paper as specified and also over it and applying a coat of clear glossy wood finish (Touchwood), complete all as specified and as directed. Polish shall be done on all exposed/external surfaces remaining surfaces shall be applied one coat of pink primer.

Bed ply wood Top, FD-246/247

Table dressing gents, FD-230

Table dressing ladies, FD-251

Sofa set four seater , FD-281/373

Sofa set five seater , FD-281/373

Table dining for 6/8 person, FD-273/376

Table centre, FD-274

Table bed side, FD-276

Table writing, FD-275

Table peg, FD-277/384

Table 900 x 600 mm without drawer, FD-284

Bin Multipurpose, FD/E6/MAP/09

Teapoy wooden, FD-278

Side board, FD-241, 371

Table bed side (Map), FD/E6/MAP/17

Table Dining 4 Pers, [FD-273 / FD/MAP-II/03 ]

Chair dining with cushion, [FD/E6/MAP/10/ 10(R)]

Table dining 6 Per, FD-Spl

Almirah mess utensil, FD-93 (M)

Table 900 x 900x 760mm, FD-291

Desk lecture stand FD-125

Chair wooden bottom FD-285

Please Enable Macros to View BoQ information