Special repair to roads from Abdul Hamid chowk to Asal Uttar and old veterinary line under GE (W) Jabalpur

Amount

Basic Rate : Refer Schedule'A' Notes

M&L for sand filling under floors or in foundation or path or pavings including watering and consolidation complete all as specified and directed. Note:- Compacted thickness shall be measured and paid.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed.

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debrise to out side MD land complete all as specified & directed.

Dismantling of ashlar facings, dressed stone work and pre-cast concrete articles, kerb stones etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in padding, roof/ floor kerbs or mud stops and the like, rounded or chamfered on edge including necessary form work if required complete all as specified and directed.

M&L for factory made precast coloured kerb stones of size and shape as per site requirement in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate (with plain or interlocking joints as approved by GE), chamfers, weatherings, throating etc and setting in cement mortar (1:4) complete all as specified & directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400Sqm and depth exc 50mm but not exc 100mm by using mechanical scarifier including racking over and grading the broken-up surfaces to the proper camber or removing to a distance not exc 50M from the starting point and stacking complete all as directed.

M&L for WBM 75mm thick (compacted thickness) with coarse aggregates (granite/ basalt/ trap) of grading-2 (63mm to 40mm size) or grading-3 (50mm to 20mm size), spread, rolled and consolidated to required gradient and camber with 8 to 10 tonne tandem vibratory roller complete all as specified and directed.

M&L for WBM 75mm thick (compacted thickness) with coarse aggregates, spread, rolled and consolidated to required gradient and camber with 8 to 10 tonne tandem vibratory roller but except materials (aggregates) complete all as specified and directed. Note:- Old coarse aggregates as obtained from "scarifying or picking gravelled from macadam or bituminous macadam surfaces" here-in-before shall be used after mixing in required grading and quoted rate shall be deemed to be inclusive of these provisions also.

M&L for repair to potholes any depth, not exc 1.0Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for repair to potholes any depth, not exc 1.0Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 5 Kg/ 10Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder i.e. paving bitumen VG-30 @ 9.80Kg/ 10Sqm, blinded with 0.09 Cum of stone chippings of 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of pot holes exc 30mm complete all as specified and directed.

Preparing unsurfaced WBM by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 10 Kg/ 10Sqm by using mechanical sprayer on WBM or other than black top surface of road complete all as specified.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L for applying evenly a priming/ tack coat of bituminous primer with paving bitumen VG-30 @ 5 Kg/ 10Sqm by using mechanical sprayer on black top surface of road complete all as specified.

M&L for bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness with minimum 5.5% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Bituminous premixed asphaltic semi dense concrete shall be prepared in hot mix plant only. (ii) Bituminous premixed asphaltic semi dense concrete shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for premixed bituminous macadam for consolidated thickness upto 75mm or less with using 19mm graded (Grading 2) stone aggregate with minimum 4.0% binder content using paving bitumen VG-30 by weight of total mix, rolled and compacted to required camber and gradient using 8 to 12 tonne tandem vibratory roller complete all as specified and directed. Notes:- (i) Premixed bituminous macadam shall be prepared in hot mix plant only. (ii) Premixed bituminous macadam shall be laid with sensor paver only. (iii) Binder content shall be tested at site as directed by Engr-in-Charge.

M&L for preparation of existing bituminous road surfaces by removing dust, dirt grease and other foreign matters etc and after prepration of road surfaces, applying road marking having minimum 2.5mm average thickness with & including thermo plastic (Reflective) line marker paint/ compound of uniform surface finish conforming to BS 3262 (Part-I) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/ yellow colour and super imposed with glass beads conforming to BS 6088 read in conjuction with the MOST specification 803 clause 4.3.3 complete all as specified and directed. Make of Road Marker Paint/ Compound:- Asian or Thermoline as approved by GE. Notes:- (i) MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by GE. (ii) Shape, size & pattern of marking shall be as approved by GE.

Supply and fix in repairs, CAT'S EYE/ RAISED PAVEMENT MARKER/ ROAD STUDS designed to provide enhanced, dependable road guidance to motorists in bad weather conditions, made out of strong ABS moulded body with polycarbonate/ PMMA (Acrylic) micro prismatic reflectors ultrasonically welded on the moulded ABS body for maximum retro reflection in wet and dry conditions and to be fixed with Epoxy- Resin based adhesive or Special Hot Melt Bitumen adhesive avoiding nails etc complete all as specified and directed. Make: 3M 290 Series of Road Star or equivalent Model of make- Dark Eye or Green Lite or Sun Lite as approved by GE.

Supply and fix in repairs, solar cat's eye/ studs of size 125mmx 125mmx 25mm (shank 60mm) with aluminium alloy shell, high efficiency Mono-Crystalline Solar Panel 2.40V/ 0.30Watt having one Ni-Mh or NI-cd rechargable battery (1.2V/ 1600MA), Six Super Bright LEDs with 10,000 to 18,000 mcd (Millicandela) having flash rate 2 Hz and bearable weight 10 tons approx with view distance upto 1000 meters of any colour i.e yellow, red, blue, green or white as required at site, working temp 10o-75o C, working time 3 to 4 days after fully charged battery, charging time 5 to 6 hours from direct sun light, maintenance free, un-breakable poly carbonate clear facing, automatically turns on at night and turns off at dawn including all fixing arrangment as per manufactures instructions complete all as specified and directed. Make: DA 110 (DHRUV) of DARK EYE or equivalent Model of make- Road Star or Green Lite or Sun Lite as approved by GE.

Supply and fix in repairs, solar flasher/ delineators pole mounting with protective cover & pole, fixed on the ground after necessary excavation and earth work in any type of soil, embeding the delineators on the ground with & including PCC (1:2:4) type B1 using 20mm graded stone aggregate (minimum PCC block size 200mmx 200mmx 200mm for proper grouting) complete all as specified and directed. Make of Delineators:- GPF-800 P of Road Star or equivalent Model of make- Green Lite or Dark Eye or Sun Lite as approved by GE.

Supply and fix in repairs, reflective vertical cautionary delineator post made out of 2mm thick steel sheet RECTANGULAR OD size 75x100mm of length 1200mm. Bottom plate 2mm thick of size 150 x 150mm for firm grip welded to base. Top end closed with 2mm steel sheet. All coated with heat process & baked to 120°C OR powder coated to make all weather resistant. At top on both sides diamond grade cube corner micro white reflector of size 75x125mm laminated in 2mm deep cavity to make it scratch resistant. Post to have two bands all around of white reflective sheet of width 225mm by keeping black coat as bands for greater night visibility including embeding the delineators on the ground with & including PCC (1:2:4) type B1 using 20mm graded stone aggregate (minimum PCC block size 200mmx 200mmx 200mm for proper grouting) complete all as specified and directed. Make of Delineators:- GPL-11-16 of make GREENLITE/ GREENS or equivalent Model of make- Road Star or Dark Eye or Sun Lite as approved by GE.

Supply and fix in repairs speed bumps/ speed breakers of size 750mmx 250mmx 75mm made out of pre-coloured material (Black/Yellow) and UV stabilizers keep them perpetually colourful, studded with reflectors on either side to make it clearly visible to motorists during night hours, highly resistence to severe impacts and harsh weather conditions, dovetail interlocking sub units, jointed and fixed on road after clean the surface, mark the nail points, grout the holes and clean the surface again and applying appropriate epoxy adhesive on the road surface & bumps on the fixing area and hammer the 6 nails provided with the bumps complete all as specified and directed. Make: Model No: DA 1006 of DARK EYE or equivalent Model of make "Road Star" as approved by GE.

Supply and fix stainless steel frame suitable for sign board made out of stainless steel (SS-304 Grade) pipes and other sections as required at site and fixed on the ground after necessary excavation and earth work in any type of soil, embeding the frame post on the ground with & including PCC (1:2:4) type B1 using 20mm graded stone aggregate (minimum PCC block size 200mmx 200mmx 200mm for proper grouting) complete all as specified and directed.

Supply and fix 4mm thick aluminium composite panel (ACP), LDPE core thickness 3.5mm and top & bottom skin 0.25mm thick of size as required at site and colour as approved by GE and fixed on stainless steel frame as in sign board with proper riveted/ bolted complete all as specified and directed. Make:- Eurobond or equivalent brand other make as approved by GE. Note:- Supply and fixing of stainless steel frame shall be measured and separately under respective item of BOQ here-in-before.

Supply and fix HIP retro-reflective type-IX sheet of size & shape as required at site and colour & pattern as approved by GE fixed on aluminium composite panel (ACP) sheet complete all as specified and directed. Make of HIP retro-reflective type-IX sheet:- 3M(TM) or equivalent brand of other make as approved by GE. Note:- Supply and fixing of aluminium composite panel (ACP) sheet shall be measured and separately under respective item of BOQ here-in-before.

Writing letters or figures (Block, Roman, Italian or Indian), arrows, stops, commas, short lines, dashes, hyphens, brackets etc of HIP retro-reflective type-IX sheet as required at site and colour & pattern as approved by GE, fixed on sign board complete all as specified and directed. Make of HIP retro-reflective type-IX sheet:- 3M(TM) or equivalent model of other make as approved by GE. Note:- Shape & size of sticker, letters & numbers etc shall be as approved by GE.

M&L for 80mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles confirming to IS 15658-2006, M-40 designation of section as approved by GE in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed. Make:- Mehtab Tiles, Indore (MP) or Nitco, Mumbai or Mayur Tiles & Interlocking pavers, Lucknow or Star Tiles & Industries, Ramadevi, Kanpur as approved by GE.

M&L for preparing new (previously untreated)/ old painted concrete/ kerb stones, asbestos cement or plaster surfaces of any description over 10cm in width or girth and applying two coats of plastic emulsion paint over and including a coat of priming paints plaster coat complete all as specified and directed.

M&L for 110mm bore, UPVC pipes (SCH-40) with and including jointing and jointing materials and necessary fittings if required as in weep holes complete all specified and directed.

Schedule of credit amount of Rs.38,050.00 to be deducted during AOC

M/s ESS KAY Construction

M/s PARASRAM MULCHANDANI