Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹4.9 LAccepted-AOC KATGHORA ROAD DIPKA DIPKA KORBA C G 495452 | KORBA | CHHATTISGARH | 495452 | ₹4.9 L Quoted ₹4.1 L | L-1 | Accepted-AOC Accepted as the bidder attains L-1 status |
| 2 | Rejected-Technical H NO 35 MUDHALI JAWALI KORBA CG 495445 | KORBA | KORBA | CHHATTISGARH | 495445 | - | - | Rejected-Technical Rejected as the bidder attains L-3 status |
| 3 | Rejected-Technical | - | - | Rejected-Technical Rejected as the bidder attains L-4 status |
| 4 | Rejected-Technical 483 PODI BAHAR WARD NO 21 KORBA C G PIN CODE 495677 | KORBA | CHHATTISGARH | 495677 | - | - | Rejected-Technical Rejected as the bidder attains L-2 status |
| 5 | Rejected-Technical | - | - | Rejected-Technical Rejected as the bidder attains L-5 status |
| Sl No | Description | Qty | Unit | amro enterprises L1 | M/s-S.R. Sharma L4 | TRIPTI INDUSTRIES L5 | SAMEER ENGINEERING WORKS L2 | DC Enterprises L3 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Making of 03 nos. box type pontoons with Centre box and wing boxes (1x8) all complete by: (i). Surface preparation, welding works including both side etc. as per instruction of Engineer In Charge (ii). Finishing with Epoxy Paint (two or more coats) including appropriate priming coat, preparation of surface, etc. complete with ready mixed paint of approved brand with one coat of primer & two or more coat of paint for even finishing (iii). Assembly of pontoon, checking for leakages, leakage repairing if required, handling/shifting of boxes to desired site, arrangement of water drain as per instruction of Engineer In Charge (iv). Steel fabrication works for pump base platform, walkway platform on centre box, railing works, foot guarding, fencing, ISMC works for pontoon assembly etc. all complete Note: The approx. quantity for making of one no. of pontoon is as follows: a). Fabrication of box type pontoon by surface preparation, welding works both side, etc. as per instruction of In Charge - 43300 Cm (Total welding length for centre box and eight wing boxes= 216.5 x 2 Side = 433 mtr = 43300 cm) b). Finishing with Epoxy Paint(two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete with ready mixed paint of approved brand with one coat of primer & two coat of paint - 325.9 Sq. mtr c). Assembly of pontoon as per instruction of Engineer In Charge - 1 Job d). Providing & Fixing of MS Nut Bolts - 20.12 Kg e). Steel Work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using stuctural steel as required in stringers, treads, landings etc. including use of chequered plates wherever requied all complete - 1563 Kg | 3 | No. | 1,38,000 ₹4.1 L | 1,91,999 ₹5.8 L | 2,30,000 ₹6.9 L | 1,58,972 ₹4.8 L | 1,77,901.6 ₹5.3 L |
| 2.00Note: 1). The estimated cost put to tender is excluding the PF and Pension Component. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 08 nos. 2). Welding electrodes, industrial gas, welding machine, MS nut-bolts with washer, tools & tackles, safety items for manpower engaged etc. shall be in the scope of the contractor. 3). Iron & Steel, ISMC, ISA shall be provided by the department. 4). Power for welding machine shall be provided by the department. 5). Crane & Truck for loading and transportation of boxes shall be provided by the department. 6). For Diagram of a Box Pontoon please refer to page no. 24 of NIT or uploaded tender documents. | ||||||||
| 3.00 | Total impact of GST for the purpose of CTC | 1 | Nos | - | - | - | - | - |
Tender Value
₹12.6 L
EMD Value
₹15,800
Closing Date
30 Aug 2025, 5:00 pmClosed
Staff Officer (EnM)
Office of the General Manager, Dipka Area, Ph. No. 9424141353
Making of 03 nos. box type pontoons with Centre box and wing boxes (1x8) by water tight welding of joints, cutting and fitting/assembly, walkway platform, railing works, finishing by painting etc. complete required for pump set installation at DEP.
2025_SECL_341625_1
SECL/GM/DA/SO(EnM)/ e-tender/25-26/78 dtd-16/08/25
Open Tender
Electrical and Maintenance Works
45 days
Dipka Expansion Project, Dipka Area
Please refer to tender documents
3 documents required · 3 mandatory
₹15,800
23 Dec 2025
18 Aug 2025
1 Sept 2025
18 Aug 2025
30 Aug 2025
19 Aug 2025
18 Aug 2025 - 25 Aug 2025
Amount
Making of 03 nos. box type pontoons with Centre box and wing boxes (1x8) all complete by: (i). Surface preparation, welding works including both side etc. as per instruction of Engineer In Charge (ii). Finishing with Epoxy Paint (two or more coats) including appropriate priming coat, preparation of surface, etc. complete with ready mixed paint of approved brand with one coat of primer & two or more coat of paint for even finishing (iii). Assembly of pontoon, checking for leakages, leakage repairing if required, handling/shifting of boxes to desired site, arrangement of water drain as per instruction of Engineer In Charge (iv). Steel fabrication works for pump base platform, walkway platform on centre box, railing works, foot guarding, fencing, ISMC works for pontoon assembly etc. all complete Note: The approx. quantity for making of one no. of pontoon is as follows: a). Fabrication of box type pontoon by surface preparation, welding works both side, etc. as per instruction of In Charge - 43300 Cm (Total welding length for centre box and eight wing boxes= 216.5 x 2 Side = 433 mtr = 43300 cm) b). Finishing with Epoxy Paint(two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete with ready mixed paint of approved brand with one coat of primer & two coat of paint - 325.9 Sq. mtr c). Assembly of pontoon as per instruction of Engineer In Charge - 1 Job d). Providing & Fixing of MS Nut Bolts - 20.12 Kg e). Steel Work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using stuctural steel as required in stringers, treads, landings etc. including use of chequered plates wherever requied all complete - 1563 Kg
Note: 1). The estimated cost put to tender is excluding the PF and Pension Component. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 08 nos. 2). Welding electrodes, industrial gas, welding machine, MS nut-bolts with washer, tools & tackles, safety items for manpower engaged etc. shall be in the scope of the contractor. 3). Iron & Steel, ISMC, ISA shall be provided by the department. 4). Power for welding machine shall be provided by the department. 5). Crane & Truck for loading and transportation of boxes shall be provided by the department. 6). For Diagram of a Box Pontoon please refer to page no. 24 of NIT or uploaded tender documents.
Total impact of GST for the purpose of CTC
SAMEER ENGINEERING WORKS (BID ID -1179659)
DC Enterprises (BID ID -1179643)
M/s-S.R. Sharma (BID ID -1178736)
TRIPTI INDUSTRIES (BID ID -1178779)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid