Loading…
Loading…
Tender Value
₹60.4 L
EMD Value
₹1.2 L
Closing Date
24 Dec 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SNT WORK
19 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited.The average annual contractual turnover shall be calculated as an average of 'Total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender as per Annexure- G of tender booklet.
b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.
In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Definition of Similar Work:- Any work involving provision of LTE/IMPLS/VoIP/ based train control communication system/MIS/LAN/WAN/UTS/PRS/FOIS/any enquiry system/ Data connectivity/ Data com equipment/Video conferencing system.
32 conditions · 26 needing a document upload
Please furnish list of Works completed in last seven financial years giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall also be given. Annexure -G.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Documents to be Submitted Along with Tender: (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company /Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be. (ii)Following documents shall be submitted by the tenderer
(a)Sole Proprietorship Firm: All documents in terms of Para 10 of the Tender Form (Second Sheet) above (As per GCC-2022). (AFFIDAVIT BY SOLE PROPRIETORSHIP FIRM as per Annexure-O-1 in tender document)
(b)HUF: i) A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.as per GCC-2022.
(c)Partnership Firm: All documents as mentioned in para18 of the Tender Form (Second Sheet) as per GCC-2022.As per GCC- 2022. (Annexure-O-2 of tender booklet.)
d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet).as per GCC-2022.
(e)Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above.(Eligibility Criteria) above as per GCC-2022. (Annexure-O-10 of tender booklet.)
(f)(i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)..(Eligibility Criteria) above as per GCC2022. (Annexure : O-11 O-12 & O-13 of tender booklet.)
g)Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer whether sole proprietor/ a company or a partnership firm/registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected.
Please submit your correspondence address, e-mail ID and valid phone number.
Please submit your bank details i.e. Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.as per annexure -J of tender booklet.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
Each page of the tender papers will be treated as signed/accepted by the tenderer(s) or such person(s) on his/their behalf who is/are legally authorized to sign for him/them.
Firm has to be get Registered with GST before signing of Tender documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Declaration form regarding site etc. as per annexure -C of tender booklet.
Declaration regarding constitution of firm as per Annexure-D of tender booklet.
Engineers/Personnel as per annexure -F of tender booklet.
Performa of Completion Certificate as per annexure -L of tender booklet.
The bidder will be submitted Bid Security Declaration in place of earnest money. Annexure -VI.
The tenderers may also upload the following documents along with his/their tender: The tenderer may upload statement, which shall contain organizational set up and working systems to be adopted by the successful tenderer s during the operation of the contract. It shall contain the details of man power and machineries in the prescribed format and details of methodology for planning, execution, monitoring and completion of the project. The methodology so adopted shall suit to the nature of work and shall also comply fully with best practice and current regulations. A comprehensive detailing for each activity like setting-up organization, safety plan, execution plan, quality assurance plan, sequence of work to achieve the mile stones, ensure targeted progress and quality and in turn deployment of resources, risk analysis and its mitigation strategy shall be given communication arrangement within his organization and with the railways for decisions, progress or any other matter connected with this project to ensure full information about the project including progress of work at different time scale shall also be furnished.
List of works completed in the last seven financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work. Date of actual start, actual completion and final value of contract should also be given.
Supportive documents/certificates from the organizations with whom they worked/are working as list of works completed and list of works on hand should be enclosed.
List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award .annexure -H
Uploading of declaration regarding Employment/Partnership etc. of Retired Railway Employees as per GCC-2022 as per annexure -Q of tender booklet.
Uploading of Tender Forms shall embody the contents of the contract documents either directly or by reference and shall be as per specimen form, Annexure-I. e-Tender Forms shall be issued free of cost to all tenderers.
A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure-V(A) shall also be submitted by the each member of a partnership firm/Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be.Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. (As per Railway board letter no.2022/CE-l/CT/GCC- 2022/Policy dt. 13.12.2022)
S&T work (Telecom work) in connection with Upgradation/improvement and Development of goods shed at Datia, Dabra & Bhind stations of Jhansi Division.
JHS-N-GSU-13-25~NCR
JHS-N-GSU-13-25
Open
Works - General
12 Months
Jhansi, Uttar Pradesh
₹0
₹1.2 L
24 Dec 2025
2 Dec 2025
10 Dec 2025
83 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 55,10,578.32 | ||
| — | 2745.00 | — | — | ||
| Supply of UTP CAT-6 cable of reputed make Siemen/Systemax / D-Link/ Tyco/ Krone/ AMP or similar.(Inspection By Consignee) | — | — | — | 50,343.3 | |
| — | 15.00 | — | — | ||
| Supply and installation of 8 port Gigabit Lite Managed PoE Layer 2 Switch supports 8 nos 10/100/ 1000 BASE-T ports,along with 2 Gigabit SFP ports, as per RDSO/SPN/TC/65/2021, Rev 6.0 Amendment No. 1, 2 & 3 or latest make D-Link/Zyxel/JUNIPER/TP-LINK or superior. (Inspection Agency:- RITES). | — | — | — | 1,04,550 | |
| — | 6.00 | — | — | ||
| Supply, installation and testing of Rackbase layer 2 Manageable Switches 24 PORT POE based Eth 10/100/1000 Mbps compatible + 4 optical port 10/100/1000 Mbps compatible of Cisco/ HP/Nortel or similar reputed make only.(Inspection By Consignee) | — | — | — | 86,950.74 | |
| — | 9.00 | — | — | ||
| Supply of 2.048 Mbps, Managed SHDSL modems, as per RDSO spec. no. RDSO/SPN/TC/80/2020, Rev.2.0 or latest with suitable connector. A pair consists of V.35 and G.703 interfaces. Make:-D-link or Similar(Inspection By Consignee) | — | — | — | 2,96,437.95 | |
| — | 12.00 | — | — | ||
| Supply of 2 Mbps Line termination unit/LAN extender 48V DC/230 V AC operated, as per RDSO spec. no. RDSO/SPN/TC/82/2020 Rev. 2.0 or latest, along with suitable connectors to extend line data over copper cable of 0.5mm/0.63mm/0.9mm dia. or CAT 5/6 cables. Make:D-link or similar(Inspection By Consignee) | — | — | — | 2,89,856.16 | |
| — | 9.00 | — | — | ||
| Supply of 2 Mbps Router, 2 LAN/4 WAN port, 230V AC operated, as per RDSO spec.No. RDSO/SPN/TC/84/2008 Rev. 0 or latest, along with connecting cables, connectors etc. for connecting to the ether net devices, of reputed make like Cisco/D link or better.(Inspection Agency By RITES) | — | — | — | 7,52,091.12 | |
| — | 15.00 | — | — | ||
| Supply & fixing of I/O box- CAT-6.DLink make or similar reputed make.(Inspection By Consignee) | — | — | — | 4,672.8 | |
| — | 60.00 | — | — | ||
| Supply and installation of RJ-45 connector. D Link Make or better.(Inspection By Consignee) | — | — | — | 342.6 | |
| — | 30.00 | — | — | ||
| Supply of D-Link 2 mtr Cat-6 Patch Cord Lan Cable make D-Link Or similar.(Inspection By Consignee) | — | — | — | 3,504.6 | |
| — | 3.00 | — | — | ||
| Supply, installation, testing and commissioning of 55 inch large screen monitor, 4K resolution, smart/ Android, make LG/SONY/SAMSUNG. All installation accessories to be part of this item.(Inspection By Consignee) | — | — | — | 2,18,625.12 | |
| — | 3.00 | — | — | ||
| Supply and installation of 16 CH NVR 8 SATA CP-UNR-16 Up to 16 channel IP camera input, Total Throughput 640 Mbps, H.265/H.264/MJPEG/MPEG4 codec decoding, Up to 12Mp resolution preview and playback,8 SATA III Ports, up to 8TB capacity for each HDD, 2 HDMI / VGA simultaneous video output, Support Multi-brand network cameras, ONVIF Version 2.4 conformance, Mobile Software: iCMOB, gCMOB CMS Software: KVMS, KVMS Pro. Make-CP-Plus/Sparsh/IDIS or Superior. (Inspection By Consignee) | — | — | — | 77,490 | |
| — | 6.00 | — | — | ||
| Supply and installation of 1 KVA UPS with 30 Microtek/APC/libert/uniline/luminous or similar.(Inspection By Consignee) | — | — | — | 90,000 | |
| — | — | — | backup. | ||
| — | 6.00 | — | — | ||
| Supply and installation of wall mountable 19 ''12U rack complete with all accessories with Front Glass Door, Socket Power DB, Fan-FanTray,Cable Manager ,Hardware Packet , Earthing etc. with required accessories for mounting the equipment. Make: D-Link/CP-Plus, HCL/Rittel/APW/President or superior. (Inspection By Consignee) | — | — | — | 61,474.8 | |
| — | 3.00 | — | — | ||
| Supply of i5 Desktop computer DELL/HP or similar processor i5 10th generation 8GB DDR4 RAM 19.5" LED monitor, USB, 1TB Hard Disk& 7200 RPM.(Inspection By Consignee) | — | — | — | 1,23,002.46 | |
| — | 3.00 | — | — | ||
| Supply of Computer Table consists of Computer cum Printer table with key board pullout tray and table top.(Inspection By Consignee) | — | — | — | 22,500 | |
| — | 3.00 | — | — | ||
| Supply and Instillation of wall mountable 19''6 U rack complete with all accessories like Front Glass Door, Socket Power DB, Fan-FanTray, Cable Manager ,Hardware Packet , Earthing etc. with required accessories for mounting the equipment. Make: D-Link/CP-Plus or superior.(Inspection By Consignee) | — | — | — | 9,689.37 | |
| — | 3.00 | — | — | ||
| Supply and installation of 42 U covered server Rack with front side transparent door with lock arrangement, fitted with one no. FAN tray with 4 nos. 230 V operated fans, cable organizers 2 nos., provision of two nos. of horizontal power supply (each consists of 8 Nos.x 15A/5A multi pin sockets with ON/OFF switch and fuse arrangement strip )Make HCL/Rittel/APW/President or similar. (Inspection By Consignee) | — | — | — | 76,987.5 | |
| — | 6.00 | — | — | ||
| Supply and installation of FMS (24 F-in & out) rack mountable single mode with Suitable type with splicing and termination of OFC cables with all accessories (Pig tail and other materials required for work to be supplied by contractor) Make D-link, Raycom, Tyco or similar. (Inspection By Consignee) | — | — | — | 41,245.8 | |
| — | 6.00 | — | — | ||
| Supply and installation of FMS (12 F) rack mountable single mode with splicing and termination of OFC cables with all accessories (Pig tail and other materials required for work to be supplied by contractor) Make D-link, Raycom, Tyco or similar.(Inspection By Consignee) | — | — | — | 28,099.14 | |
| — | 6.00 | — | — | ||
| Supply and installation of 4 TB surveillance Hard Disk compatible with NVR and Cameras.Make- Seagate/ Western Digital Wd Purple or Superior.((Inspection by Consignee) | — | — | — | 54,000 | |
| — | 3000.00 | — | — | ||
| Supply of Armoured Optical FiberCable , 6 Core , Single Mode,single fiber. Make:- D- LINK/Sterlite/Zyxel/Finolex or Superior. (Inspection Agency:- Consignee). | — | — | — | 68,850 | |
| — | 6.00 | — | — | ||
| Supply of 20 Pair PIJF cable 0.63MM armoured cable Make: Usha Martin or Similar. (Inspection Agency By RITES) | — | — | — | 17,25,000 | |
| — | 12.00 | — | — | ||
| Supply of Fast Ethernet to SFP Media Converter 10/100/1000 Mbps with 1.25G DDM 1310/1550 nm SFP Module Transceivers Upto 20KM of Make-D-Link/Mrotek/TPLink/Hanutech or superior. This also includes power adapter and necessary patch cords. (Inspection Agency:- Consingee). | — | — | — | 69,404.16 | |
| — | 3.00 | — | — | ||
| — | — | — | 70,502.1 | ||
| — | 3.00 | — | — | ||
| — | — | — | 3,94,557.42 | ||
| — | 15.00 | — | — | ||
| — | — | — | 11,984.25 | ||
| — | 30.00 | — | — | ||
| — | — | — | 20,049 | ||
| — | 3.00 | — | — | ||
| — | — | — | 37,751.73 | ||
| — | 3.00 | — | — | ||
| — | — | — | 33,523.65 | ||
| — | 30.00 | — | — | ||
| — | — | — | 1,00,857.6 | ||
| — | 30.00 | — | — | ||
| — | — | — | 5,219.4 | ||
| — | 30.00 | — | — | ||
| — | — | — | 19,637.4 | ||
| — | 15.00 | — | — | ||
| Supply and fixing of 50 pair Krone termination DP duly fitted with disconnection type. (Inspection By Consignee) | — | — | — | 76,578.15 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .