PROVISION OF INFRASTRUCTURE AUGEMENTATION AT INS CHILKA UNDER GE CHILKA

Amount

Schedule "A" Part – I to Schedule "A" Part – XVI: NOTE: Schedule "A" Part – I to Part – XVI are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Lumpsum price worked out by the contractor for "Buildings & Structures", as listed in Schedule "A" Part – I on Serial Page No. 41[R].

Lumpsum price worked out by the contractor for "SITE CLEARANCE / AREA DEVELOPMENT/EARTH WORK/EXCAVATION", as listed in Schedule "A" Part – II on Serial Page No. 43[R].

Lumpsum price worked out by the contractor for "INTERNAL ELECTRIFICATION", as listed in Schedule "A" Part – III on Serial Page No. 45[A].

Lumpsum price worked out by the contractor for "INTERNAL WATER SUPPLY", as listed in Schedule "A" Part – VII on Serial Page No. 47.

Lumpsum price worked out by the contractor for "SEWAGE DISPOSAL", as listed in Schedule "A" Part – V on Serial Page No.50.

Lumpsum price worked out by the contractor for "EXTERNAL WATER SUPPLY", as listed in Schedule "A" Part – VI on Serial Page No. 52[R].

Lumpsum price worked out by the contractor for "EXTERNAL ELECTRIFICATION", as listed in Schedule "A" Part – VII on Serial Page No.57[R].

Lumpsum price worked out by the contractor for "ROADS /PATH/CULVERT", as listed in Schedule "A" Part – VIII on Serial Page No. 62[R].

Lumpsum price worked out by the contractor for "AREA DRAINAGE", as listed in Schedule "A" Part – IX on Serial Page No. 64.

Lumpsum price worked out by the contractor for "SECURITY WALL/FENCING/GATE/COMPOUND WALL/ RETAINING WALL", as listed in Schedule "A" Part – X on Serial Page No. 68.

Lumpsum price worked out by the contractor for "SOLAR PV SYSTEM AND SOLAR HEATING", as listed in Schedule "A" Part – XI on Serial Page No. 70.

Lumpsum price worked out by the contractor for "LIGHTENING PROTECTION", as listed in Schedule "A" Part – XII on Serial Page No. 71.

Lumpsum price worked out by the contractor for "RAIN WATER HARVESTING", as listed in Schedule "A" Part – XIII on Serial Page No. 72.

Lumpsum price worked out by the contractor for "HARD STANDING HELIPAD", as listed in Schedule "A" Part – XIV on Serial Page No. 73.

Lumpsum price worked out by the contractor for "FIRE FIGHTING & FIRE ALARM", as listed in Schedule "A" Part – XV on Serial Page No. 75[R].

Lumpsum price worked out by the contractor for "HVAC", as listed in Schedule "A" Part – XVI on Serial Page No. 77.

Schedule "A" Part - XVII: [Miscellaneous Items] [Roads/path /culvert, Rain water harvesting, Internal Water Supply, External Water Supply, Internal Electrification, External Electrification, Lightning Protection, DG Set, Solar PV system and solar heating, compound wall, fire fighting & fire alarm and HVAC ]:

All as per Serial Item No. 17 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per Serial Item No. 17 above but for each additional light point on the same switch circuit

All as per Serial Item No. 17 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per Serial Item No. 17 above but for one bell point controlled by one bell push.

All as per item No.17 here-in-before but controlled by two two way switches complete all as specefied and directed.

Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size but not less than 25mm dia of copper lugs complete all as specified as directed

Supply and Fix ceiling fan 1200 mm sweep complete AC single phase 230 Volt 50 HZ ,5 star rated,connecting with flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to ceiling fan including all hanging arrangement complete all as specified and as directed.

Supply and Fix exhaust fan 300 mm sweep or nearest size, plastic body (Heavy duty), complete with louvers suitable for operation on 230 V AC, 50 Hz AC supply fixed on wall making opening,fixing and making good the distrubered surfaces etc complete all as spcified and as directed.

Supply and Fix analog PIR sensor complete all as spcified and as directed. Make: CAT No. K5015 of CROMPTON or its equivallent in PHILIPS/ WIPRO/ HAVELLS/ LIGHTING TECHNOLOGY as approved by GE.

Supply and Fix Energy efficient LED surface mounted luminare light fitting of 7200 lumen complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size and fixing arrangement complete all as specified and directed.

Supply and Fix Energy efficient LED surface mounted luminare light fitting of 3900 lumen complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size and fixing arrangement complete all as specified and directed.

Supply and Fix Energy efficient LED surface mounted luminare light fitting of 3000 lumen complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size and fixing arrangement complete all as specified and directed.

Supply and Fix Energy efficient LED surface mounted luminare light fitting of 2000 lumen complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size and fixing arrangement complete all as specified and directed.

Supply and Fix Energy efficient LED surface mounted luminare light fitting of 1200 lumen complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size and fixing arrangement complete all as specified and directed.

Supply and Fix Energy efficient LED surface mounted luminare light fitting of 1000 lumen complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size and fixing arrangement complete all as specified and directed.

Supply and Fix Energy efficient LED surface mounted luminare light fitting of 600 lumen complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size and fixing arrangement complete all as specified and directed.

Supply and Fix Energy efficient LED mirror light of 7 Watts with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size and fixing arrangement complete all as specified and directed.

Supply and Fix Energy efficient LED with T-light of 10 watts including angle holder complete all as specified and directed.

Supply and Fix Energy efficient LED surface/ceiling mounted bulk head light fitting of 600 lumen complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size and fixing arrangement complete all as specified and directed.

Supply and Fix Energy efficient LED bulb 10 watts with wall bracket complete all as specified and directed.

Material and labour for providing sub-main wiring with 2.50 sqmm nominal area two single core PVC insulated unshethed multi-stranded FRLS copper conductor cable including one 2.50 sqmm PVC insulated unshethed multi-stranded copper conductor cable for earth wire drawn through suitable PVC conduit of suitable size complete all as specified and as directed. Note :(i) Two run of 2.5 Sqmm + one run of 2.5 Sqmm as a earth wire cable + one run of PVC conduit shall be measured as an one Unit.

Material and labour for providing sub-main wiring with 4.0 sqmm nominal area two single core PVC insulated unshethed multi-stranded FRLS copper conductor cable including one 4.0 sqmm PVC insulated unshethed multi-stranded copper conductor cable for earth wire drawn through PVC conduit of suitable size but not less than 20mm dia complete all as specified and as directed. Note :(i) Two run of 4.0 Sqmm + one run of 4.0 Sqmm as a earth wire cable + one run of PVC conduit shall be measured as an one Unit.

Material and labour for providing sub-main wiring with 6.0 sqmm nominal area two single core PVC insulated unshethed multi-stranded FRLS copper conductor cable including one 6.0 sqmm PVC insulated unshethed multi-stranded copper conductor cable for earth wire drawn through PVC conduit of suitable size but not less than 20mm dia complete all as specified and as directed. Note :(i) Two run of 6.0 Sqmm + one run of 6.0 Sqmm as a earth wire cable + one run of PVC conduit shall be measured as an one Unit.

Material and labour for providing sub-main wiring with 6 sqmm nominal area four single core PVC insulated unshethed multi-stranded FRLS copper conductor cable including two 6.0 sqmm PVC insulated unshethed multi-stranded copper conductor cable for earth wire drawn through PVC conduit of suitable size but not less than 32 mm dia complete all as specified and as directed. Note :(i) Four run of 6.0 Sqmm + two run of 6.0 Sqmm as a earth wire cable + one run of PVC conduit shall be measured as an one Unit.

Earthing complete with Copper Earth Plate Electrode 600 X 600 X 3 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 20 x 3.00 mm copper strip [Earth Lead] and GI pipe 400 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified.

Supply and fix hot dip GI ladder type cable tray with cover for fixing XLPE cable at various places to accommodate the cables for MCPs, panel etc of size not less than 150mm (width) x 50 mm (height) with 2 mm thick sheet fixing to wall/ suspended from ceiling with brackets/ threaded suspenders with necessary bends,angles,supports for fixing,etc all as specified and as directed

Supply and fix hot dip GI ladder type cable tray with cover for fixing XLPE cable at various places to accommodate the cables for MCPs, panel etc of size not less than 450mm (width) x 50 mm (height) with 2 mm thick sheet fixing to wall/ suspended from ceiling with brackets/ threaded suspenders with necessary bends,angles,supports for fixing,etc all as specified and as directed

Supply and laying of 80 mm x 50 mm UPVC trunking system including accessories complete all as specified and as directed

Supply and laying of 225 mm x 38 mm metal/ GI openable, screw type 3 compartment RACEWAYS including accessories complete all as specified and as directed

Supply and laying of junction box for 225 mm raceway height adjustable 65-90 mm including accessories complete all as specified and as directed

LT Panel board made out of CRCA sheet 2.00 mm thick Indoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 aluminium bus bar of 200 Amps rating with heat proof colour code, insulators suitable for three phase and four wire LT AC, 50 Hz 415 V complete with powder coating, necessary internal electric connection as required and provision of the following:

INCOMER [a] MCCB AC 3 Phase 415V, 50Hz, 4 pole, 100 Amps capacity 36KA ( ICS=ICU 100%) microprocessor release with in built relay with adjustable type thermal and magnatic setting release - 01 No OUTGOING: [b] Single phase digital KWH meter built in tamper proof compartment with sealing arrangements with MCB, DP 32 Amps, 'C' curve - 12 Nos.

LT Panel board made out of CRCA sheet 2.00 mm thick Indoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 aluminium bus bar of 150 Amps rating with heat proof colour code, insulators suitable for three phase and four wire LT AC, 50 Hz 415 V complete with powder coating, necessary internal electric connection as required and provision of the following:

INCOMER [a] MCCB AC 3 Phase 415V, 50Hz, 4 pole, 63 Amps capacity 36KA ( ICS=ICU 100%) microprocessor release with in built relay with adjustable type thermal and magnatic setting release - 01 No OUTGOING: [b] Single phase digital KWH meter built in tamper proof compartment with sealing arrangements with MCB, DP 32 Amps, 'C' curve - 06 Nos.

LT Panel board made out of CRCA sheet 2.00 mm thick Indoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 aluminium bus bar of 150 Amps rating with heat proof colour code, insulators suitable for three phase and four wire LT AC, 50 Hz 415 V complete with powder coating, necessary internal electric connection as required and provision of the following:

INCOMER [a] MCCB AC 3 Phase 415V, 50Hz, 4 pole, 63 Amps capacity 36KA ( ICS=ICU 100%) microprocessor release with in built relay with adjustable type thermal and magnatic setting release - 01 No OUTGOING: [b] Single phase digital KWH meter built in tamper proof compartment with sealing arrangements with MCB, DP 32 Amps, 'C' curve - 02 Nos.

Supply and laying of Solid Cable, Cat6 UTP, 4 Pair, 23 AWG, LSZH, grey colour through existing conduit / trunk complete all as specified and as directed. Make: Systimex/Digisol/Legrand

Supply and termination of RJ-45Jack of Cat6 for with Single port British-style Face plate 86x86 mm with Curvature and wall mount box complete all as specified and as directed. Make: Systimex/Digisol/Legrand

Supply and laying of Cat 6 24-port loaded Patch panel, 1U height.k complete all as specified and as directed. Make: Systimex/Digisol/Legrand

Supply and termination of Cat6 UTP shielded and factory crimped LSZH patch cord, 1mtr complete all as specified and as directed. Make: Systimex/Digisol/Legrand

Supply and termination of Cat6 UTP shielded and factory crimped LSZH patch cord, 2mtr complete all as specified and as directed. Make: Systimex/Digisol/Legrand

Supply and Installation of 6U/400D Wall Mount rack including power distribution box, fan, Cable Manager and H/W Screw packet complete all as specified and as directed. Make: APW/Valrack/Rittal

Supply & fix 24U 600/600D UL Listed Floor mount Rack loaded with one no 10 Skt 5/15A power distribution unit, 4 Nos cable manager, Four Nos 90CFM FANs, 1No HD Self and one packet H/W screw complete all as specified and as directed. Make: APW/Valrack/Rittal

Supplying, installation, testing and commissioning of L-2+ Managed Switch with minimum 24 X 10/100/1000 Base-T ports and additional 4 Nos, SFP uplink ports , Support IPv6 Management complete all as specified and as directed. Make : CISCO /HP/DIGISOL

Supply and laying of Solid Cable, Cat6 UTP, 4 Pair, 23 AWG, LSZH, grey colour through existing conduit / trunk complete all as specified and as directed. Make: Systimex/Digisol/Legrand

Supply and termination of RJ-45Jack of Cat6 for with Single port British-style Face plate 86x86 mm with Curvature and wall mount box complete all as specified and as directed. Make: Systimex/Digisol/Legrand

Supply, Installation, Testing & commissioning of 19" Rack Mountable VoIP ready EPABX with initially equipped with 6 P&T Ports, 100 Analog extensions ports and 08 IP User expandable up to 896 Ports including analog / digital and IP user with caller identification on all extensions, PRI support, including required number of cards hardware and software for providing 100% Non blocking, unfiled communication complied, Expandable up to 400 trunk ports including analog, pri, Ip trunk etc., Q-Sig complied, Built in LCR, IP DECT Phone Support, Wifi IP phone support, DECT complied (Cordless Telephone), CTI ready, remote maintenance, Built-in multi-party video conferencing, 64(32+32) party audio conferencing, supports instant messaging, Unified messaging, Multisite connectivity with 100% feature transparency (upto 50), Supports Outlook integration, Application feature: Contact center, UC suit, basic software with all necessary hardware, software & all other standard features with all other materials as required complete all as specifeid and as directed. Make-NEC/Panasonic/Alcatel

Supplying, installation, testing and commissioning of 100 pair DP box with krone modules including all fixing accessories complete all as specified and as directed. Make : Krone or its equivalent as approved by GE

Supplying, installation, testing and commissioning of 30 pair DP box with krone modules including all fixing accessories complete all as specified and as directed. Make : Krone or its equivalent as approved by GE

Supplying, installation, testing and commissioning of 20 pair DP box with krone modules including all fixing accessories complete all as specified and as directed. Make : Krone or its equivalent as approved by GE

Supply and laying of 30 Pair, 0.5mm telephone cable through existing conduit including all fixing accessories complete all as specified and as directed. Make: Finolex/Polycab/Schneider

Supply and laying of 20 Pair, 0.5mm telephone cable through existing conduit including all fixing accessories complete all as specified and as directed. Make: Finolex/Polycab/Schneider

Termination & link testing of LAN and Voice cable at both the end complete all as specified and as directed.

Supply and laying of 2 Pair, 0.5mm telephone cable through existing conduit including all fixing accessories complete all as specified and as directed. Make: Finolex/Polycab/Schneider

Supplying, installation, testing and commissioning of 10 pair DP box with krone modules including all fixing accessories complete all as specified and as directed. Make : Krone or its equivalent as approved by GE

Supply and laying of 20 Pair, 0.5mm armoured jelly fill telephone cable through existing conduit including all fixing accessories complete all as specified and as directed. Make: Finolex/Polycab/Schneider

Supply and fix chromium plated brass angle valve for basin mixer and geyser point confirming to IS:8931 complete all as specified and as directed.

Supply and fix 15 litres capacity geyser, 5 star rating, V/H, 2KW, 230 Volts complete with all fixing accessories/ connecting pipes all as specified and as directed.

Supply and fix chromium plated brass two way bib cock confirming to IS:8931 complete all as specified and as directed.

Material and Laboure for 150 mm dia Ductile iron pipe spigot and socket type all as per IS:8329-2000 class K7 flexible rubber gasket push on type joint having cement mortar lining with portland slag cement as per IS 455 : 1989 bituminous coating as per Annex 'C' of IS 8329, including all accessories complete all as specified and directed.

Material and Laboure for 100 mm dia Ductile iron pipe spigot and socket type all as per IS:8329-2000 class K7 flexible rubber gasket push on type joint having cement mortar lining with portland slag cement as per IS 455 : 1989 bituminous coating as per Annex 'C' of IS 8329, including all accessories complete all as specified and directed.

Supply and fix 150 mm dia Cast iron air release valve with two air outlets fixing up in cast iron water supply mains complete with fixing accessories complete all as specified and as directed.

Supply and fix 100 mm dia Cast iron air release valve with two air outlets fixing up in cast iron water supply mains complete with fixing accessories complete all as specified and as directed.

Supply and fix 80 mm dia Cast iron air release valve with two air outlets fixing up in cast iron water supply mains complete with fixing accessories complete all as specified and as directed.

Masonry valve chamber of size 1000 x 1000 x 1000mm [interanl dimensions] comprising of 50mm thick PCC for valve including excavation and earth work in any type of soil and 200 mm thick PCC 1:4:8 type D2 foundation, brick work in CM (1:6) plastring internal surface 15 mm tick in CM (1:4) PCC (1:3:6) type B1 couping 50 x50x6 mm angle iron 3 mm thick MS plate cover complete with locking arrangement painting steel and iron surface with two coat of synthetic enamel paint over a coat of zinc chrome primer all as specified and as directed.

Masonry valve chamber of size 600 x 600 x 600mm [interanl dimensions] comprising of 50mm thick PCC for valve including excavation and earth work in any type of soil and 200 mm thick PCC 1:4:8 type D2 foundation, brick work in CM (1:6) plastring internal surface 15 mm tick in CM (1:4) PCC (1:3:6) type B1 couping 50 x50x6 mm angle iron 3 mm thick MS plate cover complete with locking arrangement painting steel and iron surface with two coat of synthetic enamel paint over a coat of zinc chrome primer all as specified and as directed.

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 800 Amps capacity for 3 Phase, 4 wire with and including the following accessories

Incoming (From transformer) [a] ACB , 415Volts, 800 Amps, 65KA, TPN, EDO Type with microprocessor controlled OL/SC and EF releases ,Shunt trip release, auxilliary contacts and terminals taken out suitable for cable termination taken out suitable for cable trmination as required at site - 01 No. [b] Multifunction digital meter suitable for three phases four wire system, unbalanced loading CL 1.0 flush mounting with RS 485 communication port for reading Voltage, Current, pf.KW, KWH, KVAr, KVAh - 01 No. [c] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set Outgoing: [a] MCCB 250 Amps, 3 pole, 25 KA breaking capacity - 05 Nos [b] MCCB 100 Amps, 3 pole, 25 KA breaking capacity - 01 No [c] MCCB 63 Amps, 3 pole, 25 KA breaking capacity - 02 Nos

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M 7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 800 Amps capacity for 3 Phase, 4 wire with and including the following accessories

Incoming (From DG set) [a] MCCB 400 Amps, 4 pole, 415 Volts, 50 Hz, AC, 36 KA breaking capacity - 01 No [b] Multifunction digital meter suitable for three phases four wire system, unbalanced loading CL 1.0 flush mounting with RS 485 communication port for reading Voltage, Current, pf.KW, KWH, KVAr, KVAh - 01 No. [c] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set [c] On load change over switch 4 pole, 415 Volts, 50 HZ AC, 400 Amps, terminal shrouds, staggered terminals, horozontal mounting, frony operated complete -01 No Outgoing: [a] MCCB 250 Amps, 3 pole, 25 KA breaking capacity - 02 Nos [b] MCCB 100 Amps, 3 pole, 25 KA breaking capacity - 01 No [c] MCCB 63 Amps, 3 pole, 25 KA breaking capacity - 02 Nos

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 300 Amps capacity for 3 Phase, 4 wire with and including the following accessories

[a] MCCB 250 Amps, 4 pole, 415 Volts, 50 Hz, AC, 36 KA breaking capacity- 01 No [b] APFC relay 7 step with LCD display with CT of suitable capacity -01 No [c] MCB, 63 Amps, TP, 415 Volts, 50 Hz AC - 04 Nos [d] MCB, 25 Amps, TP, 415 Volts, 50 Hz AC - 03 Nos [e] 25 KVAR, power factor correction capacitor indoor type including wire for use on 415 Volts, 3 phase, 50 Hz, AC supply confirming to IS-2834- 1986, 100% polypropylene double layer - 02 Nos [f] 10 KVAR, power factor correction capacitor indoor type including wire for use on 415 Volts, 3 phase, 50 Hz, AC supply confirming to IS-2834- 1986, 100% polypropylene double layer - 01 No [g] 05 KVAR, power factor correction capacitor indoor type including wire for use on 415 Volts, 3 phase, 50 Hz, AC supply confirming to IS-2834- 1986, 100% polypropylene double layer - 02 Nos

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 400 Amps capacity for 3 Phase, 4 wire with and including the following accessories

INCOMER [a] MCCB 250 Amps, 4 pole, 415 Volts, 50 Hz, AC, 36 KA breaking capacity- 01 No [b] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set Outgoing [c] MCCB 100 Amps, 3 pole, 415 Volts, 50 Hz, AC, 25 KA breaking capacity- 8 Nos

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 200 Amps capacity for 3 Phase, 4 wire with and including the following accessories

INCOMER [a] MCCB 100 Amps, 4 pole, 415 Volts, 50 Hz, AC, 36 KA breaking capacity- 01 No [b] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set OUTGOING [c] MCCB 63 Amps, 3 pole, 415 Volts, 50 Hz, AC, 16 KA breaking capacity- 05 Nos

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 200 Amps capacity for 3 Phase, 4 wire with and including the following accessories

INCOMER [a] MCCB 100 Amps, 4 pole, 415 Volts, 50 Hz, AC, 36 KA breaking capacity- 01 No [b] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set OUTGOING [c] MCCB 40 Amps, 3 pole, 415 Volts, 50 Hz, AC, 16 KA breaking capacity- 04 Nos

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 200 Amps capacity for 3 Phase, 4 wire with and including the following accessories

INCOMER [a] MCCB 200 Amps, 4 pole, 415 Volts, 50 Hz, AC, 36 KA breaking capacity- 01 No OUTGOING [b] MCCB 63 Amps, 3 pole, 415 Volts, 50 Hz, AC, 16 KA breaking capacity- 04 Nos [d] MCB TP, 10 KA, 40 Amps - 01 No

LT Panel board made out of CRCA sheet 2.00 mm thick Indoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 Aluminium bus bar of 125 Amps rating with heat proof colour code, insulators suitable for three phase and four wire LT AC, 50 Hz 415 V complete with powder coating, necessary internal electric connection as required and provision of the following:

INCOMER [a] MCCB AC 3 Phase 415V, 50Hz, 4 pole, 63 Amps capacity 36KA (ICS=ICU 100%) microprocessor release with in built relay with adjustable type thermal and magnatic setting release - 01 No OUTGOING [c] MCB, TPN, 40 Amps, 'C" curve - 03 Nos

Supply, installation, testing and commissioning of cubicle type sectionalised, front opearted bottom entry dust and vermin proof M.V.Panel Boards suitable for operation at 415 Volts, 3 phase, 4 wire, 50Hz distribution system fabricated out of 2 mm thick CRCA sheet, insulated busbar with heat shrinkable PVC sleeve, base channel duly/powder coated with paint of approved colour after treatment in 7 tank process complete with all accessories including interconnections, earth bus as required complete all as specifed and as directed. (Make: Scneider/L&T/ABB)

Incommer: [a] ACB , 415Volts, 800 Amps, 65KA, 4 Pole, EDO Type with OL/SC and EF release , Shunt trip, auxilliary contacts and terminals taken out suitable for cable termination as required at site- 01 No. [b] Multifunction digital meter suitable for three phases four wire system, unbalanced loading CL 1.0 flush mounting with RS 485 communication port for reading Voltage, Current, pf, KW, KWH, KVAr, KVAh -01 No. [c] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set Outgoing: (i) MCCB, 3 Pole, 160 Amps, 25 KA - 07 Nos (ii) MCCB, 3 Pole, 250 Amps, 25 KA - 03 Nos (iii) MCCB, 3 Pole, 63 Amps, 25 KA - 01 No

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M 7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 200 Amps capacity for 3 Phase, 4 wire with and including the following accessories

INCOMER [a] MCCB 200 Amps, 4 pole, 415 Volts, 50 Hz, AC, 36 KA breaking capacity- 01 No [c] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set OUTGOING [b] MCCB 63 Amps, 3 pole, 415 Volts, 50 Hz, AC, 16 KA breaking capacity- 08 Nos

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M 7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 200 Amps capacity for 3 Phase, 4 wire with and including the following accessories

INCOMER [a] MCCB 160 Amps, 4 pole, 415 Volts, 50 Hz, AC, 25 KA breaking capacity- 01 No [c] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set OUTGOING [b] MCCB 100 Amps, 3 pole, 415 Volts, 50 Hz, AC, 16 KA breaking capacity- 01 No

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M 7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 200 Amps capacity for 3 Phase, 4 wire with and including the following accessories

INCOMER [a] MCCB 100 Amps, 4 pole, 415 Volts, 50 Hz, AC, 25 KA breaking capacity- 01 No [c] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set OUTGOING [b] MCB 63 Amps, TP, 10 KA breaking capacity- 03 Nos

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M 7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 200 Amps capacity for 3 Phase, 4 wire with and including the following accessories

INCOMER [a] MCCB 63 Amps, 4 pole, 415 Volts, 50 Hz, AC, 25 KA breaking capacity- 01 No [c] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set OUTGOING [b] MCB 40 Amps, TP, 10 KA breaking capacity- 01 No

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M 7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 200 Amps capacity for 3 Phase, 4 wire with and including the following accessories

INCOMER [a] MCCB 100 Amps, 4 pole, 415 Volts, 50 Hz, AC, 25 KA breaking capacity- 01 No [c] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set OUTGOING [b] MCB 63 Amps, TP, 10 KA breaking capacity- 02 Nos

Supply, install, testing and commissioning LT cubicle pedastal type panel board outdoor type double door, dust and vermin p-roof confirming to IP-54 made out of 3.15 mm thick FRP coated CRCA sheet mounting on suitable size foundation with 150 mm thick PCC M 7.5 type D2 with 100 mm offsets and panel board with front and rear opening and locking arrangements complete two coats of finishing powder coated paint of approved shade over one coat of red oxide primer including internal wiring with copper conductor and insulated horizontal busbar of aluminium 200 Amps capacity for 3 Phase, 4 wire with and including the following accessories

INCOMER [a] MCCB 100 Amps,4 pole, 415 Volts, 50 Hz, AC, 25KA breaking capacity- 02 Nos [c] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 01 Set OUTGOING [b] Change over switch 4 pole, 100 Amps capacity- 01 No

Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 32x6mm thick GI strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150 mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified.

Supply and fix Integral LED street light Luminaire 3500 lumen, comprising of epoxy powder coated, Pressure die cast aluminium housing enclosed with glass cover in frame, with suitable size of bracket of 1.5 Mtr length, nut and bolts, PVC insulated three core flexible cable of suitable size and length duly connected to light fitting, 130 w peak poly cristalie solar panel with inverter having provision to connect commercial supply in case of battery not getting charged, 12 Volts, 120 AH battery with enclosure, 7 meter height GI tubular pole including fixing the pole including excavation, concrete complete al las specified and as directed.

Supply and fix Integral LED street light Luminaire 3500 lumen, comprising of epoxy powder coated, Pressure die cast aluminium housing enclosed with glass cover in frame, with suitable size of bracket of 1.5 Mtr length, nut and bolts, PVC insulated three core flexible cable of suitable size and length duly connected to light fitting, 7 meter height GI tubular pole including fixing the pole including excavation, concrete complete al las specified and as directed.

Supply, install, testing and commissioning double door feeder pillar fabricated made out og 3 mm thick CRCA sheet duly painted with 200 Amps Aluminium busbar with nuetral bus bar including necessary foundation complete with and including the following [a] MCB 40 Amps, TPN, 'C' Curve - 01 No [Incoming] [b] MCB 06-16 Amps, SP 'C' Curve - 06 No [Outgoing] [c] 16 Amps SP MCB with 6/16 Amps socket outlet with 10 Amps modular switch, bracket holder with 06 Amps modular switch - 01 No

S&F Speed breaker of size 420 mm width and of height 70-75 mm made out of strong weather-resistant hardened rubber capable to with stand weight of the vehicles comprises of segments of colour black/ yellow, Length of one segment 490-500mm and having 2 x 2 = 4 numbers glass reflective lenses suitable for fixing with 4 steel zinc plated 12 x 120 mm nails complete all as specified and as directed. MAKE: CAT No. GPL-07-55 of GREENS/GREENLITE or its equivalent as approved by GE.

Supply and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved, glow stud shall support a load of 13635 kg tested in accordance with ASTM D 4280, the slope of retro-reflective surface shall be 35 (+/-5) degrees to base, reflective panels on both sides with at least 12cm of reflective area up each side, luminance intensity should be as per the specification and shall be tested as described in ASTM I : 809 as recommended in BS: 873 part 4 : 1973, studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete all as specified and as directed.

M&L for 2.5 mm thick road marking strips of specified shade / colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-incharge and accordance with applicable specifications.

Supply and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with necessary fixing arrangements complete all specified and as directed. Note: Weight of stainless steel members shall only be considered payment excluding fixing accessories such as nuts, bolts, fasteners etc.

Design, supply and laying of IAAF approved synthetic athletic track (full PUR system) complete all specified and as directed.

Supply & planting carpet Grass including excavation upto 30cm depth, removing the excavated soil to a distance exceeding 250 metres and not exceeding 500 metres and filling of soft soil and cow dung complete all as specified and as directed. Note: Loose soil and cow dung shall be measured and paid separately under relavent items of BOQ.

Supply only approved manure (Cow dung) of best quality.

S&F wall mounted fan 400 mm size suitable for o-peration on 230 Volts, AC, 50 Hz fixing on wall including connecting upto ceiling rose with 1.5 Sqmm 3 core stranded copper conductor cable complete with fixing accessories complete all as specified.

Providing and fixing galvanised concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre all complete all as specified and as directed. Note : M.S. angle, C.C. blocks shall be paid measured and paid separately.

M&L for applying two coats of weather proof exterior emulsion paint over a coat of primer( for compound wall only) .

Dismantling wrought iron or mild steel work of any description not otherwise provided for (Concertina coil) complete all as specified.

Supply, install, test commissioning of poly crystalline solat PV panel of 10 KWp alongwith inverter of suitable capacity with and including the following (a) Minimum capacity of solar panbel 330 Wp (b) The solar module shall consist of impact resistance, low iron and high transmission toughened glass. (c) Design, M&L for module mounting structure as approved by accepting officer. (d) The top cover of solar panel shall be with 6 mm thick toughned glass. (e) Laying of suitable size cable of 1.10 KV grade, XLPE copper conductor armoured power cable along with GI perforated cable tray from solar panel to inverter (Distance approx 20 metre) (e) The array junction box shall be suitable for PV aaray (KMake: Hykon/ Hensel) Make: Solar Panel: Waaree/ Vikram/ Tata- BP : Inverter: Delta/ Schneider/ ABB

Supply and filling of Gravel of ize 20-40 mm in harvesting pits complete all as specified and directed.

Supply and filling of Gravel of ize 40-60 mm in harvesting pits complete all as specified and directed.

Supply, install, testing and commissioning Electric motor driven pressurization pump of flow rate 450 litres/ minute and of head 35 metres complete with pump set, electric motor, base frame and with 02 No, pressure switch, 01 No pressure guage, 02 Nos butterfly valves, 01 No Non return Valve including necessary PCC foundation and fixing the same with necessary foundation bolts with copper interconnector from pump panels to pump drwan through PVC conduit (05 metre Approx) complete all as specified and as directed.

LT Panel board made out of CRCA sheet 2.00 mm thick Indoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per IS: 8623 Aluminium bus bar of 200 Amps rating with heat proof colour code, insulators suitable for three phase and four wire LT AC, 50 Hz 415 V complete with powder coating, necessary internal electric connection as required and provision of the following:

M&L for Fire point comprising of CO2 fire extinguisher 4.5 Kg - 2 Nos, Dry carbon powder (ABC) - 5Kg 2 Nos, ceiling hook, fire beater, sand buckets 9 ltr capacity- 2Nos ,showel complete with angle iron stand duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide primer including dismantling old unserviceable one complete all as specified and directed by Engineer - in - Charge.

Supply and fix 6 kg ABC type fire extinguishers including all fixing accessories completed all as specified and as directed.

Supply and fix 9 litres capacity fire extinguisher, ISI marked, confirming to IS:10204, containing 540 ml AFF liquid confirming to IS:4989 Part II and a polyurethane coated CO2 gas catridge, confirming to IS:4947 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket completed all as specified and as directed.

Supply and fix first aid hose reelwith MS construction spray painted in post office red, confirming to IS:884 with complete with and including the following [a] RRL hose type A 15 metre - 01No [b] Branch pipe GM 63 mm instantaneous inlet, made threded oultlet, 15 mm bore nozzle short -01 No [c] Drum and brackets for fixing the equipment on wall.

Matetial and labour for providing wiring with 2.50 sqmm nominal area two single core PVC insulated unshethed multi-stranded FRLS copper conductor cable in the existing surface/ recessed conduit with all accessories complete all as specified and as directed. Note :(i) Two run of 2.50 Sqmm shall be measured as an one Unit.

Providing, installation, testing and commissioning of 500 cfm, 50 mm static pressure Heat Recovery unit having efficiency of 75% and above with energy recovery wheel, suction and discharge DIDW forward curved centrifugal blowers with suitable motor for fans, leak proof casing as per specification including starters for heat recovery wheel and blowers along with relays etc (to be installed in the AHU panel) for working both independently or in conjunction with AHU (One AHU and one HRU will be installedi in each AHU room), the dimension of AHU and HRU should be such that it can be accomodated in the AHU room complete all as specified and as directed.

Providing, installation, testing and commissioning of 600 cfm, 50 mm static pressure Heat Recovery unit having efficiency of 75% and above with energy recovery wheel, suction and discharge DIDW forward curved centrifugal blowers with suitable motor for fans, leak proof casing as per specification including starters for heat recovery wheel and blowers along with relays etc (to be installed in the AHU panel) for working both independently or in conjunction with AHU (One AHU and one HRU will be installedi in each AHU room), the dimension of AHU and HRU should be such that it can be accomodated in the AHU room complete all as specified and as directed.

Providing, installation, testing and commissioning of 1300 cfm, 50 mm static pressure Heat Recovery unit having efficiency of 75% and above with energy recovery wheel, suction and discharge DIDW forward curved centrifugal blowers with suitable motor for fans, leak proof casing as per specification including starters for heat recovery wheel and blowers along with relays etc (to be installed in the AHU panel) for working both independently or in conjunction with AHU (One AHU and one HRU will be installedi in each AHU room), the dimension of AHU and HRU should be such that it can be accomodated in the AHU room complete all as specified and as directed.

Supply & fixing of Acoustic lining of supply air duct and plenum with 25mm thick resin bonded glass wool having density 32 Kg/CuM, with 25 mmX 25 mm GI section of 1.25 mm thick, at 600 mm center to center covered reinforced plastic Tissue paper & 0.5 mm thick perforated Aluminium sheet (30% perforation) fixed to inside surface of the ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc as required & as per specifications. and as per approved shop drawings.

Supplying, installation, testing & commissioning of fire dampers in supply air duct/ main branch/ return air duct as and where required of required size, fusible link type as per UL-555 with having limit to switch to switch off the AHU when dampers shutts complete all as specified and as directed.

Supplying, installation, testing & commissioning of Powder coated extruded Aluminium grills and diffusers with VCD anti smudge ring and removable core complete all as specified and as directed.

Supplying, installation, testing & commissioning of Powder coated extruded Aluminium grills and diffusers with anti smudge ring and removable core complete all as specified and as directed.

Supplying, installation, testing & commissioning extruded aluminium fresh air intake louvers with bird screen, pre filter and VCD complete all as specified and as directed.

Supplying, installation, testing & commissioning aluminium exhaust air louvers with bird screen and VCD complete all as specified and as directed.

Supplying, installation, testing & commissioning of 16 Guage GI Duct Volume control damper, complete with neoprene rubber gasket, nuts, bolts, screws, linkages, flanges etc., as required complete all as specified and as directed.

Supply, installation, testing and commissioning 1.5TR capacity hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with 5 star rating including fixing arrangement amd hanging brackets complete all specified and as directed.

Supply, installation, testing and commissioning 2TR capacity hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with 5 star rating including fixing arrangement amd hanging brackets complete all specified and as directed.

Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50 mm thick, density 32 KG/CuM resin bonded glass fiber insulation friction fixed in 610mm X 610mm frame work made of 25x50x50x50x25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete all as specified and as directed.

Supplying and fixing of aluminium foil 19 mm thick duly laminated of mat finish closed cell Nitrile rubber ( Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber, joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as all specified and as directed.

Supply and fixing of thermal insulation on exposed roof (under deck) with 13 mm thick cross linked closed cell polyethylene FR-XPE insulation, tape & adhesive (Pidilite SR -998) complete all specified and as directed.

Supply and fixing 150 mm dia PVC (SWR) slotted pipe single socketed in any length with rubber ring joint laid in trenches/ floors complete all specified and as directed.

Supplying, Installation, Testing and commissioning of Silent Diesel Generating Set having prime power of 320 KVA at 0.8 pf at NTP conditions (Alternator directly coupled with Diesel Engine) suitable for automatic operation on mains failure complete in all respect and comprising of following and as per specification enclosed on existing cement concrete platform. [A] Alternator : Self excited, self regulated, brush less type 415 Volts, 3 phase 50Hz synchronous generator delivering 320 KVA at 0.8 PF (lag) at NTP condition Conforming to IS/IEC- 60034-1 screen protected self regulated +1% regulation, IP 23 protection with insulation Class-H, AC alternator complete with, 630 Amp MCCB and outgoing terminals taken out for cable connection along with all accessories. [B] Engine : Four (4) stroke, Multi cylinder Turbo charged Radiator Cooled Diesel Engine of suiltable BHP (to give prescribed output excluding power consumption for running Auxiliary Accessories) operating at 1500 RPM, fuel tank of 450 litres capacity duly calibrated including medium class MS piping for fuel piping from day tank to Engine and back, residential type silencer, SS flexible below for exhaust pipe and 24 V DC starting arrangement with 2 Nos 12 V battery having Ampere-Hr rating as prescribed by the manufacturer of Engine along with battery charger, as required. [C] Base Plate: Common base plate of required size for mounting of engine alternator set fabricated from MS channel and vibration damping arrangement with cushy foot mounting i/c painting as per standard practice of manufacturer etc. as required at site.

[D] Acoustic Enclosure : The acoustic enclosure is made 14/16 gauge CRCA sheet. The sailent features of acoustic enclosure are:- The enclosure is modular construction with the provision to assemble and dismantle easily at site finished with powder coat painting of approved colour. [i] The Sheet metal components are Seven Tank pre treated before powder coating. [ii] The door are gasketed with high quality EPDM gaskets to prevent to leakage of sound as well as door handles are lockable type. [iii] Specially designed attenuators to control sound at air entry and exit points. [iv] Adequate ventilation to meet total air requirements. [v] Temprature of enclosure should not exceed beyond 5-7 degrees centigrade of ambient temperature. [vi] Emergency shut down button from outside the enclouser. [vii] Noise level <75 DB (A) at 1 mtr Distance.

Supply and laying non woven type Geotextile (Geolon PP-80 or equivalent) thickness not less 1mm , weight not less than 280 gm/Sqm having minimum tensile strength of 80 N/mm, laying all as per manufactures instruction complete all specified and as directed.

SHIVALAYA CONSTRUCTION CO. PVT LTD

Som Projects Pvt Ltd

Rds Project ltd.

SVC PROJECTS PVT. LTD

KEC International Ltd

VISHAL INFRASTRUCTURE LTD

Varindera Constructions Limited