WBPWD/AE/WBESD/eNIQ-10 of 2025-26

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for horizontal run & above false ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] - Average run 10 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. - On Board

S/F 2 nos 6 A Modular type Plug socket with 2 nos Modular type switch to be fixed on GI 6 Module Modular type switch board with top cover to be fixed directly on wall incl. interconnection as to G.S

Supplying and fixing double-door 2+8 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make - Legrand / Crabtree / Seimens)

Supplying and fixing double-door 2+4 way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make - Legrand / Crabtree / Seimens)

Supplying and fixing 240/415 V 6-32 A SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Make - Legrand / Crabtree / Seimens)

Supplying and fixing 240/415 V 40 A DP MCB Isolator on din rail of existing DBs and necessary connection. (Make - Legrand / Crabtree / Seimens)

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & Fixing twin LED light fitting (make - Philips Model No - TMC 502 P 2 x T LED 22 W P3241 with 2 no 18 W MAS LED 2100 lm tube light having Polycarbonate body (Philips) suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

S/F of Fully diffused surface mounted 2'X2' LED luminaire with high transmitive diffuser suitable for indoor spaces. (Make - Philips Full Glow Surface Mount-SM367 cat No: SM367 LED36S-6500 G6 L54W54 PSU OD / equivalent Wipro / Crompton)

S & Delivery of 240V,90W, minimum RPM 1325rpm, 3-blades, AC Full body metal wall bracket fan (motor housing canopy should be metalic and inbuild thermostate protection ) 450 mm or 18 inch on wall by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) on 150mmX300mm best quality vernished wood or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length Make orient, Model :- Tornado Wall - II/ crompton/EPC

Supply & Delivery of 230v 52W, 48" (1200mm), 370 RPM, AC ceiling fan complete with safety wire and p2 type capacitor down rod, canopy fork, blades, etc. without regulator.(Make: Usha Striker plus/ equivalent to Orient/ Crompton)

Taking down the existing ceiling fan, disconnecting the damaged downrod & refixing by supply & fixing of 14 SWG MS downrod having drilled holes for housing nuts, bolts, washers & safety nuts as per direction of EIC for fixing ceiling fan at suitable position as mentioned below - 6.5 ft long

SITC of Window (Inverter type) room air conditioner having following specifications: Minimum Cooling Capacity: 4900 W ISEER Rating: 3.35 (Minimum), Star Rating - 5 star IS Compliance - IS 1391 Refrigerant: R32 / R410 Compressor: Tropical Rotary Evaporator & Condenser Coil: Copper LCD Remote & All other accessories Ambient Operating Temperature range: 18°C - 52°C Power Supply - 1 Ø 230 V, 50 Hz + Tolerance as per applicable standard Make - Mitshubishi / O'Geneal / Daikin / Hitachi.

S&F 2 No. MS. Angle (45x45x5mm) with supporting angle (25x25x5mm) with cantiliver support to be fixed at 45 degree with wall by 2 nos MS flat 25 x 25 mm to be welded as per direction incl. 4" bullet fastner,washer etc. For 1.5/2.0TR Window AC.incl. painting with 02 coat of Synthetic enamelled paint over 02 coat of R.O. primer (Berger) incl. welding, carriage and transportation. Structure dimension: 2 m (L) x 0.7 m (W) x 0.8 m (D)

Supply and fixing of aluminum frame for window machine, comprising: Frame material: Aluminum alloy (6063-T5 or equivalent) Frame thickness: 1.5 mm Frame size: 800 mm (width) x 600 mm (height), Frame profile: Rectangular Finish: Anodized/Powder coated (Silver/White) Accessories: Include all necessary screws, rivets, and other fasteners for assembly and installation.

Supply & delivery of Hi- wall Split Air conditioner (Inverter type) having following specification: Minimum Cooling Capacity(Kcal/Hr)- 4500 K.Cal/hr Or 5000W ISEER Rating - 3.8-4.39 /2022-2023 as per BEE/BIS IS Compliance- IS 1391 Refrigerant- R410A/R32 Compressor - Rotary/ Scroll Evaporator & Condenser Coil: Copper LCD Remote and All other accessories operating outdoor Temperature - 50°C PCB must be in Metallic Enclouse to avoid internal fire hazard Power supply - 240 V,50Hz(+ Tolerrance as per applicable standard) Make:- O-General/ Mitsubishi Electric/ Daikin/ Hitachi

Installation Testing & commissioning of the above Said Split ACs incl. Supply & fixing suitable 40 x 40 x 6 mm MS Angle iron structure duly grouted on floor for placing outdoor unit incl. painting structure and mending Good the damages as per direction of EIC

S & Installation of Extra Add-on Items (above 3 mtr) - HVAC grade 5/8" (for suction) & 1/4" (for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle, screws, insulation tape, fasner etc for above AC machines as per direction of EIC.

Supply & Laying 1.1KV grade 3 core 4 sqmm flexible copper cable with screw, saddle drill machine nut bolt etc all necy. items needed for connection.(from starter to AC outdoor connection)(Make: Havells /KEI/Polycab/Fenolex as per approved by EIC)

Supply & Laying 20 mm hard PVC pipe (heavy type) for water discharge (Make: Supreme / Finolex)

Supply & Fixing 6" heavy duty exhaust fan (Make - EPC / Orient / Crompton) after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection as required.

Supply of 4 ft long 18 / 20 W LED tube having min 100 lm / w output having polycarbonate body / aluminium housing (Make - Philips / Wipro / Havells)

Supply of P2 type 230 V 50 Hz 2.5 MFD fan capacitor (Make - Tibcon / Epcos) with 2 x 1.5 sq mm copper wire (Make - Havells / Polycab / Finolex) duly welded on capacitor terminal as per direction

Supply & Fixing Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) - 23 cm Exhaust fan (6")

Supply & Fixing 240 V, 21A OLP - 3 AC starter (Make - Electron) on 4 Module GI Modular type switch board incl. making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top on 2 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections.

Dismantling of unrequired cables, wires, battens, switch board, swiches, AC starter, ceiling fan, down rod, light fittings, SPN DB etc & to place them at sectional store as per direction.

B S ENTERPRISE (BID ID -6594760)

T.D.K. ENTERPRISE (BID ID -6582816)