REPAIRS TO SEWAGE LINE, MANHOLES, CLENING OF SEWAGE LINE AND SEPTIC TANK, AREA DRAINAGE, COMPOUND WALL, GATE FENCING, FLOORING, PATH, HARD STANDING AND MISC WORK AT DGQA AREA UNDER AGE B/R (S) NO II OF GE (SOUTH) SECUNDERABAD

Amount

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation or manholes etc., and area n.exc. 10 Sq.m on plan and getting out in hard/dense soil.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick.

Removing the excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

Demolition and breaking up drain pipes 100mm dia pipe (salt glazed ware,AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed

Demolition and breaking up drain pipes 150mm dia pipe (salt glazed ware,AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed.

Demolition and breaking up drain pipes 200mm dia pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 100mm dia pipe complete all as specified and directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 150mm dia pipe complete all as specified and directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 200mm dia pipe complete all as specified and directed.

M&L for SWG drain pipe grade 'A' of 100 mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified

M&L for SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified

M&L for SWG drain pipe grade 'A' of 200 mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting ou existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 100 mm dia SWG pipe complete all as specified

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting ou existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia SWG pipe complete all as specified

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting ou existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 200 mm dia SWG pipe complete all as specified

All as per item No 14 above but for removing existing branch drain, making good to walling and rendering, cutting out branch channel and making good benchings for 150 mm dia SWG pipe complete all as specified

All as per item No 14 above but for removing existing branch drain, making good to walling and rendering, cutting out branch channel and making good benchings for 200 mm dia SWG pipe complete all as specified

Demolation of Brick or stone masonry built in cement mortar.

M & L PCC Block Masonry built in CM 1:4 straight or curved exceeding 6m mean radius complete all as specified and directed.

M/L brick work with Flyash Bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified.

M&L for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, including weathering slightly rounded or chamfered angles and throating complete all as specified & directed.

S&F MS angle iron as in posts and struts as in fencing including cutting tops to shape as directed, drilled holes notching for wire etc incl all necessarydrilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165.

S&F galvanised two strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts ,including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins.

M&L PCC 1:3:6 type C2 using 40mm graded stone as in surface channels and drains complete all as specfied and directed

Dismantling posts/struts (wood, steel or RCC) any section including taking out embedded portion from concrete/brick masonry etc and making good disturbed ground complete all as specified and directed .

Dismantling fencing wire mesh, any type and in any position all directed

Supply only Chain link MS galvanisd fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

S/F mild steel as in post in fencing post/struts including cutting top to shapes, drinlings holes notching for wires etc. Fe - 290. Gde E-165 complete all as specified and directed.

Excavation in post holes or (similar holes) each n exc 0.50 Cum in soft/loose soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L PCC 1:4:8, type D2 using 40mm gd stone aggs as posts (including caps and bases) complete all as specified and directed

M&L preparation of new steel surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed.

M&L 5 to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

M&L for Round bars 6mm to 8 mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips

M&L preparation of new steel surfaces of any description not otherwise described, n exc 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed.

M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4). Note:- reinforcement will be measured and paid seperatel

S/F MS TMT bars 6mm to 8mm dia and over for reinforcement etc, cut to length, bent to shape required including cranking, bending sprially for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debrie

M/L rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M&L for Cleaning of all blockage of any type of sewage line ie branch sewer line, main sewer line etc, manholes of any section and depth, any situation by way of cleaning/disludging manholes by using any type of manually,mechanically or by way of any other suitable means including foreign materials as well as rodding of sewer lines and between successive from block manholes where required and ordered by Engineer-in-charge and keeping the sewage line functional cleaning trap,water closet,soil waste/vent pipe,gully traps upto final drop out let into septic tanks or central sewage system treatmenting in other adjoining Zone/Area of into sewage well (working in foul condition with taking precautionary measures) equipment as required or applicable all as specified and directed. manholes of any size and depth and removing the sludge/material and depositing outside the MOD land complete all as directed by Engr-in-Charge.

Cleaning and de-sludging of existing septic tanks/ deep manholes up to 3 metre deep including taking out sludge in any form alongwith all other foreign materials by mechanical equipment or manually or by way of any other suitable means including removal of sludge and other foreign materials out side the MD land by any means complete(working in foul condition) all as specified and directed.

S & F in repairs, vitreous china wash down water closet pan, white, 'P' or 'S' type, inc. plastic water closet seat, black, closed pattern with flat bottem, cover complete all as specified and directed.

Supply & fix in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

S&F in repairs10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified .

M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exc 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 300x200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over including 10mm thick screed in cm 1:3 on wall , complete all as directed and as specified by Engineer-in-charge. .

Demolition of Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection, surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed..

M&L for chequered cement concrete tiles with grey cement and pigments of size 300cmx300cmx20-25mm thick set, jointed and pointed in neat cement slurry over and including 15mm thick CM 1:6 screed bed in flooring complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block With Grey cement and pigment of any shape, size and colour confirming to IS 15658-2006 of 100 mm thickness, M-50 Grade

M/L granite machine cut 18 to20 mm thick black coloured bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match including cutting and polishing as on columns or pillars /columns over and including 15mm thick rendering in cement mortar 1: 4 incl old dismantling complete all as specified and directed

S&F 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed.

S&F for PVC (SWR) gully trap of I25/110 mm dia set and jointing wilh solvent cement complete all as specified and directed.

S&F PVC(SWR) bends 75 mm dia.with access door.

S&F PVC(SWR) bends 110 mm dia. With access door

S&F PVC(SWR) junction double,(Single T),equal or unequal. 110 mm dia .

S&F PVC(SWR) junction double,(double T),equal or unequal. 110 mm dia with access door.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm.

S&F for PVC (SWR) gully trap of I25/110 mm dia set and jointing wilh solvent cement complete all as specified and directed.

PARDEEP AND CO

M/S DIVIJA BUILDERS

MAHALAKSHMI INFRA PROJECTS

BEEGEE DESIGN SYSTEMS

LAKSHMI ENGINEERS