REPAIR / REPLACEMENT TO WOODEN FLOORING, WALL PANELING, CEILING, DOOR AND WINDOW AT ZAKHAMA MILITARY STATION UNDER AGE(I) ZAKHAMA

Amount

Dismantling timber scantling 40Sqcm and over in section as in unframed work in any position complete all as specified and as directed.

M&L for 2nd class hard wood, in scantlings, clean sawn timber as in un framed work complete all as specified and as directed.

Dismantling timber scantling under 40sqcm in section in fillets, rails, rafter, purlins etc fixed with nails/screw etc complete all as specified and as directed.

M&L for 2nd class hardwood plain fillets sectional area exc 13 & n exc 25 sqcm, clean swan ,square,rectangular or triangular in section, secured with nails or brads complete all as specified and as directed.

M&L for 2nd class hardwood plain fillets sectional area exc 6 & nexc 13 sq.cm, clean swan ,square,rectangular or triangular in section, secured with nails or brads complete all as specified and as directed.

S&F 30 mm thick 2nd class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in floors and Skirting etc, preparation of new wooden surfaces and applying two coats of synthetic varnish including taking out old boarding of any description complete as specified and as directed.

S&F 4mm thick, plywood, grade BWR,type BB, fixed with nails to timber frame work fixed with nails to timber frame work on wall including taking out old plywood of any description complete all as specified and as directed.

S&F for 4mm thick, plywood, grade BWR,type BB, fixed with nails to timber frame work fixed with nails to timber frame on ceiling, flat or slopingwork including taking out old plywood of any description complete all as specified and as directed.

M & L for 4mm thick vaneered decorative plywood, grade 1 (with BWR resin) with decorative face on one side fixed with nails to timber frame work including taking out old plywood of any description complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm complete all as specified and directed.

Taking down shutter of any description area n.exc 1 sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description area exc 1 sqm but n exc 2 Sqm each including builders hardware complete all as specified and as directed.

S & F factory made solid PVC door frame of size 40mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S & F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specfication, drawing and complete all as specified and as directed.

S&F 30mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.

S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (without sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc with plain, chamfered or rounded, mitred beads (with sash bars) for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood or wood based materials of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S & F 100 mm size stainless steel butt hinges, complete all as specified and as directed.

S & F 75 mm size stainless steel butt hinges, complete all as specified and as directed.

S & F 50 mm size stainless steel butt hinges, complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S&F 100 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed.

S & F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S & F floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and as directed.

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu.cm each complete all as specified and as directed.

S&F steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and as directed.

S & F in repairs, aluminium door closer (Diecast) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and as directed.

S & F in repairs, 20mm to 25mm dia stainless steel tubular curtain rod fancy type including brackets, stops, rollers etc complete all as specified and as directed.

S & F stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and as directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M & L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

M & L for rubbing of existing kota stone flooring and applying two coats of wax polish complete all as specified and as directed.

M & L for rubbing of existing marble flooring and applying two coats of wax polish complete all as specified and as directed.

M & L for rubbing of existing granite flooring and applying two coats of wax polish complete all as specified and as directed.

SHRIi Bachulal shah