Temporary EI work

Amount

Supply and drawing of the following sizes pvc insulated and unsheathed multistranded copper wire on hire basis with carrying cost at the sites and dismantling as per direction of EIC including socketing,glanding and necessary finishing as required for 2 days

7/0.036 Sqmm Single Core Copper Wire

3/0.029Sqmm Single Core Copper Wire

Supply and drawing of the following sizes pvc insulated and unsheathed multicore aluminium armoured cable on hire basis with carrying cost at the sites and dismantling as per direction of EIC including socketing,glanding and necessary finishing as required for 2 days

4CX35 sq mm cable

4C X 25 Sqmm cable

4CX16 sq mm

Providing and installation on Hire basis 500V TPN MS with rewirable fuse/HRC fuse fixed on angle iron frame incl providing necy inter connection wiring, 2 nos of earthing with earthing attachment and dismantling as directed by EIC after the programme (for 2 days)

Providing and installation on hire basis power BDB/TPNMCBDB 440V , 100/125Amp 4 Pole MCB isolator as incomer with 32Amp or 64 Amp per way(min 4 Way) out going connection, with all arrangement in a outdoor type pillar box incl interconnection with proper socketing and dismantling as direcyted by EIC after the programme (for two days)

Providing and installation on hire basis 500 V, 63Amp/32Amp 4 Pole MCB fixed on sheet metal box with proper socketing and dismantling as direcyted by EIC after the programme (for two days)

Providing and Fixing on hire basis following LED Flood light fittings complete with all accessories(like Clamps, nuts and bolts as required) and dismantling as directed by EIC after the programme (for 2 days)

Minimum 200 Watt LED Flood fittings.

Providing on hire basis 5A/15A plug socket complete with necy wiring in 3 x 1.5 sq.mm single core copper wire and dismantling as directed by EIC after the programme (Avg Run- 3mtr )

Providing on hire basis 600 mm sweep Air Circulator Fan complete incl. transportation, loading unloading and dismantling after programme as per direction of EIC (2 days)

Maintenance, operation and Guarding arrangement of the installation of temporary lighting round the clock by 3 skilled labour & 3 helper per day throughout the period. (1 skilled labour and 1 helper per shift)

Transportation charge for the materials from Company's godown to Site and return back to godown after use.

Special Terms and conditions for Temporary E.I. Work 1) Earthing should conform to IS specification. Earth Continuity wire should not be broken / Jointed. Single Earth continuity wire should be used from Earth Bus-Bar to the installation. 2) Main Electrical Panel Should be earthed by two nos. of separate earthing. 3) MCB / Rewirable Fuse type Distrubution Board should be installed with proper Trip Current setting / fuse wires. However, MCB type DBs are preferable. 4) No Part of the Electrical Circuit in the pandal / Structure shall be within 12 inches of any decorative cloth / paper. 5) Ordinary Flexible wires should not be used. Only new PVC insulated & sheathed wires (Bearing ISI mark) or PVC insulated wires of FRLS (Fire Resistant Low Smoke) type (ISI Marked) are allowed. 6) All cable ends should be properly sockedted. 7) All joints shall be made with porcelain insulated connectors. Twisted & lapped joints shall be avoide. But Joints are strictly not allowed in the dias. 8) Cables / Wires should run along outside the Dias. 9) Ceiling fan (s) / Electrical fittings must not be suspended from the ceiling of Dias. Pedestal fans are not allowed on the Dias. However, Pedestal fans may be installed outside dias, but the body of the fan must be properly earthed.

10) T/L fittings shall be of box type (Indoor commercial type). Any kind of open type fittings must be avoided. 11) Each A.C. Machine should be connected with a separate circuit and earthing should be provided by separate single earth contunuity wire from Earth Bus-bar. 12) P.A. System and Microphone shoud be earthed. 13) Sufficient quantity of Fire Extinguishers and First Aid Box should be provided. 14) If the DGs are not placed at site on time pro rata rate will be reduced from bill. 15) No additional charges will be paid for any unwanted incidents like theft, willfull damage etc.

S. K. CHATTERJEE ELECTRICALS PVT LTD (BID ID -6767179)

GHANASHYAM ELECTRIC STORES (BID ID -6764821)