CA NO. GE AF NO.1/GUR-20/2024-25 COMPREHENSIVE (B/R) MAINTENANCE WORKS INCLUDING JOINERY WORKS IN BUILDING NO P/144 TO P/153 AT SEKHON VIHAR AREA AT AF STN PALAM, UNDER GE (AF) GURGAON NO 1.

Amount

Dismantling of floor, hearth or wall tiling including cement morter bedding (but not backing) and rubbish off the premises complete all as specified and as directed by Engr in Charge.

M&L for non-skid ceramic coloured tiles of size 7-8 mm thick( square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exceeding 0.11 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed by Engr in Charge.

S & F vitrified tiles light shade 10mm thick (square/rectangular) polished, area of each tile n.exc. 0.36 sqm, in floor etc.,set and jointed in neat cement slurry over 15mm thick screed bed in CM 1:6 and pointed in white or coloured cement with pigment to match for laying floor finishes complete all as specified and as directed by Engr in Charge.

M&L Glazed ceramic coloured tiles, 200x300x7mm thick, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick screed bed in cement mortar 1:4 set and jointed in neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the tiles, complete all as specified and as directed by Engr in Charge.

Dismaintling of stone slabs and tiles of any description or thickness in floor orwall, aprons and laid badded and pointed in any mortar. Etc complete all as specified and as directed by Engr in Charge.

M&L Machine cut Granite stone slab/ tiles any colour 20mm thick, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone/tiles including grinding and polishing complete over and including 15mm thick screed bed in CM (1:4) for laying in floor/skirting/plateform/wall lining etc complete all as specified and as directed by the Engr-in-charge

M&L for 18-20 mm thick machine cut Kota stone slab of size 550mm x 550mm in flooring over cement screed bed 18-20mm thick in CM 1:4 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror polishing in repairs, complete all as directed by Engr-in-Charge.

S&F of SDR-11 CPVC pipe 20 mm dia fixed to concealed in wall ceilling,laid in floor etc including all fittings and jointing with solvant and brass threaded fittings for fixing taps and valves etc and other situation including Taking up or down unserviceable steel water tubing with fittings and Connections, etc., complete all as specified and as directed by Engr in Charge.

S&F of SDR-11 CPVC pipe 25 mm dia fixed to concealed in wall ceilling,laid in floor etc incl all fittings and jointing with solvant and brass threaded fittings for fixing taps and valves etc and other situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc.,complete all as specified and as directed by Engr in Charge.

M&L for applying cement paste mixed with RBR compound (Roff Bond Repair) mixed in ratio as per manufacturers instructions to stop the seepage, applied in sides of Nahni trap/floor traps, W.C traps, junction of pipes, bends & similar item/joints/ junctions to eliminate the seepage also at the wall area n.exc 1.5 Sqm Each complete all as specified and as directed by Engr in Charge.

M&L for rectification of leakage in 15/20mm bore GI pipe lines, joints and repair by refixing serviceable fittings and replacement of unserviceable fittings such as socket, elbow, Tee, union, reducer etc complete all as specified and as directed by Engineer-in-Charge.

M&L for replacement of 75mm outlet PVC(SWR) floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and directed by Engr-in-Charge

S&F 32mm dia PVC LDPE pipe with fitting such as elbow/socket of pressure rating 6kgf/sqcm laid in wall and floor including cutting chase and fixing in complete and making good complete including taking down of old pipe complete all as specified and as directed by Engr in Charge.

S&F in repair 110mm dia PVC SWR pipe laid to wall and floor and fixed with clamp including taking down old pipe, complete all as specified and as directed by Engr in Charge.

S&F in repair 75mm dia PVC SWR pipe laid to wall and floor and fixed with clamp including taking down old pipe,complete all as specified and as directed by Engr in Charge.

S&F in repair 110 mm dia PVC SWR Bend complete all as specified and as directed by Engr in Charge.

S&F in repair 75 mm dia PVC SWR Bend complete all as specified and as directed by Engr in Charge.

S&F in repair 32 mm dia PVC SWR Bend complete all as specified and as directed by Engr in Charge.

S&F in repair 110 mm dia PVC SWR Tee complete all as specified and as directed by Engr in Charge.

S&F in repair 75 mm dia PVC SWR Tee complete all as specified and as directed by Engr in Charge.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable for 75 mm dia pipe .complete all as specified and as directed by Engr in Charge.

S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable for 110 mm dia pipe .complete all as specified and as directed by Engr in Charge.

S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. .complete all as specified and as directed by Engr in Charge.

S&F Galvanised Steel Water Tubing 25mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. .complete all as specified and as directed by Engr in Charge.

S&F Galvanised Steel Water Tubing 32mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. .complete all as specified and as directed by Engr in Charge.

S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 32 mm bore chromium plated bottle trap for wash hand basin with inlet & outlet screwed for iron pipes or connection including necessary packing , union and cap complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair PVC syphon for low level PVC flushing cistern for wall mounted china ware EWC (dual flush) including fixing in position complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Syphon washer for low level flushing cistern suitable for wall mounted china ware EWC for 10 Ltr capacity dual flush and fixed complete .complete all as specified and as directed by Engr in Charge.

S&F in repairs PVC float valve with all connecting fitting suitable for low level flushing cistern complete all as specified and as directed by Engr in Charge.

S&F in repairs 32mm dia PVC pipe and rubber washer suitable for low level flushing cistern .complete all as specified and as directed by Engr in Charge.

S&F in repair 100 mm dia rubber rim washer and wall anchoring bolt suitable for fixing wall hanging Padestal pattern water closet including removing and refixing of water closet complete including connecting to flush pipe and make leak proof joint .complete all as specified and as directed by Engr in Charge.

Taking down and refixing of old serviceable water closet any pattern floor/wall mounted after completion of Tile or other work with 75mm long Brass screw fixed in floor including pointing .complete all as specified and as directed by Engr in Charge.

S&F PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items, .complete all as specified and as directed by Engr in Charge.

S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm dia complete all as specified and directed by Engineer-in-Charge .

S&F in repair waste fitting brass chromium plated of 32 mm dia for wash hand basin with long screwed sanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair waste fitting 75/100 mm size for 40/32 mm dia waste pipe for SS sink with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

S&F as in repair over head shower 120 mm dia/150mm square size cast copper alloy, chromium plated, fancy type, with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore all as specified and directed by Engineer-in-Charge.

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore all as specified and directed by Engineer-in-Charge .

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore and fixed as in repair complete all as specified and directed by Engineer-in-Charge.

S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 32 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm bore concealed stop cock with adjustable wall flange cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer-in-Charge.

S&F in repair (HDPE) water storage LOFT Tank 200 Ltrs capacity in kitchen, hoisted and fixed in position all specified in MES Schedule Part-I, including tank nipple, union and lowering of unservicable Water Storage Tank including dismantling of old water tank complete all as specified and as directed by Engineer-in-Charge.

S&F in repair grating round /circular 75mm/100mm size of stainless steel with hole or with out hole complete all as specified and as directed by the Engineer in Charge.

M&L Vitreous China White Wash down Water Closet Pan (Pedestal Pattern) including Bolts, (excluding Flushing Cistern and Flushing Pipe) fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, complete all as specified and as directed.

M&L Vitreous China White Wash down Water Closet Pan (Wall mounted type) including Bolts, (including Flushing Cistern and Flushing Pipe) integrated type with white Plastic Seat cover, and Cover including Mild Steel Chromium Plated or Aluminium Hanging Device fixed-in-repairs, including Making Good disturbed Surfaces with Cement Mortar 1:3, .complete all as specified and as directed by Engr in Charge.

S&F in repair brass CP health faucet with 1 meter chromium plated stainless steel flexible hose and wall hook complete all as specified and as directed by Engr in charge.

S&F Brass CP fancy type Bib Cock 15mm Bore (dia), Chromium Plated Long Body, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, .complete all as specified and as directed by Engr in Charge.

S&F Brass phase with washer complete suitable for 15mm bore bib tap/stop cock/Mixer Valve and fixed .complete all as specified and as directed by Engr in Charge.

S&F Brass phase with washer complete suitable for 15mm bore suitable for concealed stop cock and fixed .complete all as specified and as directed by Engr in Charge.

S&F Cap of Capston head of Bib tap/stop cock/Mixer Volve.complete all as specified and as directed by Engr in Charge.

S&F Stainless steel drawer handle 100mm long complete all as specified and as directed by Engr in Charge.

S&F Angle Stop Cock 15mm Bore (dia), fancy type,Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs.complete all as specified and as directed by Engr in Charge.

S&F High pressure PVC connections pipe 600mm long suitable for Hot and Cold water for 15mm size with Brass CP Check nut complete all as specified and directed by Engr-in-Charge.

S&F Centre hole Brass CP mixer for mixing hot & cold WHB Mixer 15mm Bore (dia) screwed down for iron pipe and fixed including taking down unserviceable WHB Mixer of any description, complete as all specified and directed.

S&F Wall Mixer for kitchen sink 15mm Bore (dia) brass chromium plated for mixing hot & cold, as Approved, fixing including Taking down unserviceable Wall Mixer of any description, complete as all specified and directed.

S&F Wall Mixer 15mm Bore (dia) brass chromium plated for mixing hot & cold, as Approved, fixing including Taking down unserviceable Wall Mixer of any description, complete as all specified and directed).

S&F in repair,Stainless steel Plate rack of size 36"x36"x10"(all dimensions in inches) complete all as specified and directed by Engr in charge .

S&F in repair, Stainless steel soap dish, complete all as specified and directed by Engr in charge.

S&F in repair, 6mm thick glass corner shelf (12"x12") with C type Brass CP bracket, complete all as specified and directed by Engr in charge.

S&F in repairs toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified and as directed by the Engineer in Charge.

M&L for petty repairs to plastered surfaces and like in CM 1:4 including preparing roughening, cleaning and making good with birla putty, finishing even and smooth in patches area exc 0.25 Sqm but not exc 1.50 Sqm in each patch and applying two coat of OBD matching the existing adjacent surfaces over a coat of primer.complete all as specified and as directed by Engr in Charge.

Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), .complete all as specified and as directed by Engr in Charge. (Note :- Rate included for four storey building including skefolding and all safety measures)

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all as specified and as directed by Engineer in Charge.

M&L for preparing new plastered surfaces plastered on walls including cornices plasters and applying two coat of oil bound distemper over a coat of primer over 1 to 2 mm thick birla putty .complete all as specified and as directed by Engr in Charge.

S&F Stainless steel Towel Rail 600mm Long and 20mm dia, as Approved, fixed including Taking down un serviceable Towel Rail of any description, .complete all as specified and as directed by Engr in Charge.

M&L for preparation of plastered or un plastered old decorated surfaces of walls by Vacuum based sanding machine all as specified, removal of nails etc & filling cracks/hole by applying wall care putty (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil emulsion distemper white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primer by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of plastered or un plastered old decorated surfaces of ceiling by Vacuum based sanding machine all as specified, filling cracks/hole by applying wall care putty and applying one coat oil emulsion distemper white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L preparation of old painted surfaces of steel & steel based surface of any description no otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L 6mm thick plywood grade BWR type BB fixed in repair to timber frame complete all as specified & directed by Engineer-in-Charge.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm..complete all as specified and as directed by Engr in Charge.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 15 mm bore complete all as specified and directed by Engineer in charge.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and as directed by Engr in Charge.

All as per Srl Item No. 78 here-in-before but exceeding 1.50 sqm each and n.exc. 4 Sqm each -ditto-

Taking down shutters only n.exc. 1.00 Sqm each complete all as specified and as directed by Engr in Charge.

Taking down shutters only exc 1 Sqm and n.exc. 2 Sqm each complete all as specified and as directed by Engr in Charge.

S&F 25 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both the faces .complete all as specified and as directed by Engr in Charge.

All as per Srl Item No. 82 here-in-before but 35 mm thick -ditto-.

M&L for 35 mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats .complete all as specified and as directed by Engr in Charge

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. .complete all as specified and as directed by Engr in Charge.

Anodised aluminium window and ventilator shutters, side hung type or sliding without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.).complete all as specified and as directed by Engr in Charge.

S&F PVC door frame of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid prelaminated PVC foam sheet mite cut at two corners and jointing with 2 Nos of 150mm long brackets of 15x15mm MS square tube of two vertical door profiles are to be reinforced with 19x19mm MS square tube of 19 guage WPDM rubber gasket weather seal tobe provided throughout frame the door frame shal be fixed to the wall using 100mm long MS screws through the frame by using PVC fastners. A minimum of 04 Nos screws to be provided for each vertical members and minimum 02 Nos of horizontal members,Make:-Rajshri,Sintex or Equivalent.complete all as specified and as directed by Engr in Charge.

S&F for 30mm thick factory made solid panel prelaminated PVC door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 19x19mm for styes and 15x15mm for topo and bottom rails. MS frame shall have a coat of steel primer of approved make and manufacturer. MS frame adhered with 5mm thick heat moulded PVC `L' channel of size 30x75mm forming styles and 5mm thick, 100mm wide PVC sheet for top rail lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap inserted for top rail and bottom rail. panelling of 5mm PVC sheet to be fitted in MS frame to the styles and rails with 5mm thick 30mm wide PVC sheet beading on either side and jointed together with solvent cement adhesive etc Complete all as specified and as directed by Engineer- in- Charge.

S&F in repair 18/19 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc complete all as specified and as directed by Engr in Charge

S&F 2nd class hard wood plain fillets not exc 3 sqcm sectional area, square, rectangular or tringular in section, wrought fixed with nails complete all as specified and as directed by Engr in Charge.

S&F in repairs 75 mm long,designer pattern Stanless Steel handles for fixing in cupboards all as directed and as specified by Engr-in Charge

S&F in repair, Magnet catch for fixing in cup board as approved by engr-in-Charge

S&F 75 mm long aluminium alloy butt hinges E-22 complete all as specified and as directed by Engr-in-Charge

Taking down old Aluminum windows of any description size not exc. 2.50 sqm and M&L for complete overhauling of the glass pane/rubber beeding/aluminum glazing clip if necessary/locking system incl.necessary roiling and adjustment etc and refixing in same location complete all asspecified and directed. Note :- Glass Pane/rubberbeeding/aluminum beeding will be measured and paid separately under subsequent items.complete all as specified and as directed by Engr in Charge

S & F in repair rubber beeding to be fixed over glass panes in Aluminum widows complete all as directed by Engr in Charge.

S&F in repair, aluminum anodised beading of suitable size to the alumiinum window frames after fixing the glass panes complete all as directed by Engr in Charge.

Dismantling structural steel work incl. steel door,gate,window guard bars,grills etc.complete all as specified and as directed by Engr in Charge

M&L fabricated frame work as in doors of gate of angle iron or other section with gusset plate rails, braces etc. complete drilled for fixing steel sheeting or other covering door etc to be prepared for hanging complete all as specified and as directed by Engr in Charge.

S&F in repairs Mild steel pipe, Chimney bars (straight or camber); bearing bars; tongues or water bars , for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165. complete all as directed by Engr in charge.

M&L PCC for 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching & for fixing railing, holdfast etc complete all as directed by Engr in charge

Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed by Engr in charge .

S&F Figured Glass pin head type 4.0mm thick, fixing to Aluminium Sections as in Panel of Doors, Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc., as required/ordered at Site(s), complete and fixed all as specified and as directed by Engr in charge .

S&F Sheet Glass ordinary 4.0mm thick, fixing to Aluminium Sections as in Panel of Doors, Windows Shutters and Panelling Works with necessary fixing Arrangements viz Jointing Cleats, Glazing Clips, Rubber Packing, Screws, etc., as required/ordered at Site(s), complete and fixed all as specified and as directed by Engr in charge .

S&F in repair for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apoerture 1.40mm and fixed with aluminium/wooden/steel beads complete all as specified and directed by Engr in charge

S&F MS medium weight cold rolled butt hinge ISI Marked 100mm size, fixed with screw complete all as specified and directed by Engr in charge

S&F in repairs, MS Helical door spring 300 mm long complete all as specified and as directed by Engr in Charge(Note:-Helical spring will be fixed by welding)

S&F butt hinge extruded aiuminium alloy with S.S hinge pin 100mm size, fixed with screw complete all as specified and as directed directed by Engr in charge.

S&F extruded anodised aluminum alloy handle 150mm long fabricated type complete all as specified and directed by Engr in charge

S&F anodised aluminum barrel tower bolt of extruded section 150mm long complete all as specified and directed by Engr in charge

S&F aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section and all as specified and directed by Engr in charge

S&F telescopic drawer channel 18" long complete all as specified and directed by Engr in charge

S & F in repair floor door stopper of size 140 mm long aluminium alloy body and tongue, anodized with hard drawn steel spring incl cleats etc fixed to door complete all as specified and as directed by Engr-in-Charge

S&F in repairs 25mm dia stainless steel curtain rods complete all as specified and as directed by Engr-in-Charge

S& F in repairs Stainless Steel designer pattern side knobs suitable for 25mm dia curtain rods complete all as specified and as directed by Engr in Charge

S&F in repairs stainless steel brackets suitable for 25mm dia SS cutain rod complete all as specified and as directed by Engr-in-Charge

M&L preparation of new or previously untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and as directed by Engineer in Charge.

M&L preparation of new or previously steel surfaces of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and as directed by Engineer in Charge.

S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified and as directed by Engineer in Charge.

Removal of debris/malwa to a distance exc 10 Km but n exc 15.00 Km out side MD land and filling in low lying area complete all as specified and as directed by Engr in Charge.

M & L 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/ sqm), duly sealed at over laps & joints with end laps of the 10cm and side over laps of 7.5cm by flame (by torch application) all as per manufacturer’s instructions, complete all as specified and directed.

Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces all as specified and as directed by Engineer in Charge.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces to receive water proofing treatment including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.

M&L for 40 mm thick cement concrete type B-0, 1:2:4 using 12.5 mm gradded stone aggregate including finishing cement concrete even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.

M&L for complete removal of existing roof treatment including PCC pedding etc all as specified and as directed by Engineer in Charge.

Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.

Note:- The amount of Rs 266250/- against Schedule of Credit on Page No 144 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

GIR RAJ BUILDERS

DEV CONSTRUCTION

M/S Parshant Associates