SPL REPAIR TO BLDG NO P21 OR INSTITUTE PROVN OF CHAIN LINK FENCING POWER CIRCUIT/WIRING ALONGWITH CONNECTED ITEMS AND ROOF ROP SOLAR SYSTEM AT UNDER GE I GOS

S&F in repair health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 20mm bore pipe complete all as specified and directed.

M&L for IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

M&L for 35 mm thick IInd Class Hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed.

S&F 35mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed.

S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed

M&L PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and directed

S&F for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each complete all as specified and as directed.

S&F for 5.5 mm thick sheet glass ordinary quality and glazed with oil putty or fixed with beads in square exc 0.5 Sqm in each pane omplete all as specified and as directed.

M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed.

M&L for painting steel and iron surfaces of steel surfaces of any description, over 10cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over coat of red oxide primer including preparation of new surface complete all as specified and directed

S&F for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work and fixed with wooden beading complete all as specified and as directed

M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed

M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in cement Mortar in 1:4 and finished the surface even and smooth (without using extra cement) complete all as specified and directed.

M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 and finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of walls with distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed.

M&L for complete removal of existing treatment on ceiling and applying two coats distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed.

M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

Supply and fixing Ceiling Fan 1200 mm, sweep star rated with blade, star rating BEE down rod complete all as specified and directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed

S&F for PVC (SWR) cowl of 110 mm dia complete all as specified and as directed..

S&F for 20mm dia CPVC Brass thread Tee complete all as specified and as directed.

S&F for 20mm stop valves (concealed type), cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed

M&L for chequered cement concrete tiles 20cmX20cmX25mm thick, set, joined and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete complete all as specified and as directed.

S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

M&L for Providing precast cement concrete manhole covers, Type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed

S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed.

Supply and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed.

S&F 20 mm dia Angle stop cock with wall flange all as specified and directed.

Supply and fixing for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN1.6) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings of size 25 mm fixed complete to walls, ceilings or in floors etc. ,complete all as specified and directed.

S&F Electric water heater storage type(Geysers) of capacity 25 ltrs min. 3 star rating complete with fitting and fixtures five star rating metal body ,complete all as specified and directed.

S&F for Joist, channel, angle, or tee sections of Fe 410-W (Gde E-165) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.

S&F modular switch 16A single pole one way complete all as specified and directed.

Supply only Chain link MS galvanisd fencing any size and type complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) ,complete all as specified and as directed

S&F for Mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and as directed.

M&L for PCC in 1:2:4 Type B0 ( 12.5 mm graded aggregate) asin lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, filling of pressed steel door frames complete all as specified and directed.

M&L for preparaton of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described as directed and apply two coats of synthetic enamel paint over red oxide complete all as specified.

S& F CP connection for Geysers complete all as specified and as directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing Excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and as directed.

Use and waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished flat surface of concrete complete all as specified and as directed.

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Columns, pillars, piers, posts and struts complete all as specified and as directed.

S&F for rolled mild steel in steel work tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipscomplete all as specified and as directed

Taking down copper/aluminium point wiring power complete incl fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per conditions seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed a site.

Point

Taking down old/unservicebale distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/Maint Switch inclluding old unserviceable MCCBs/MCBs Isolators, etc and making good to disturbed surface complete all as specified and directed.

S&F for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and as directed

S&F for struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. conforming to Fe-290 Gde E-165 ,complete all as specified and as directed

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed/existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLSH Cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories after chasing in wall/ceiling etc. heavy duty ISI marked including grade for 5/20 amps switch socket cobmination point necessary running of 4.0 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly including cutting, chasses and making good disturbed surface to match with existing finish with plater complete all as specified and directed by Engr-in-charge.

S&F in factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitble for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 125, 4 pole MCCB and ELM as incommer and MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable and box for above DB including taking down old DBs all as specified NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable kcopper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire ,complete all as specified and as directed

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F for sheet metal enclosure MCB DB SPN 16 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed

S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed

S & F for MCB Single pole and neutral rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed

S & F for metal clad box suitable for 230 volts 50 Hz AC supply three pin with MCBSP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed

Per Point

M&L for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including concealed in PVC conduit 20 mm dia ISI marked or suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly by providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick concealed in wall (duly painted with two coats of black bituminous paint over a coat of red oxide primer in and out sides) with and including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screw, washer etc for one light point/bell point etc controlled by one, one way switch complete and making good the disturbed surfaces with cement work/putty as per existing including colour/white wash/distemper to match with existing same all as specified and as directed by the Engineer-in-Charge.

(a) One light point controlled by one, one way switch

S&F for Corner shelf glass complete all as specified and directed

S& F Bib taps,cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrural and fixed fancy type.

S & F Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x20 Watt 4 FT complete, all as specified and directed.

M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and

(b) One fan/exhaust fan point controlled by one, one way switch

drawing into suitable size of PVC non metallic rigid heavy duty PVC condiut of white /ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and directed. Note :- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit.

(c) One 5 Amp socket point controlled by one way switch on same board.

S&F modular switch single pole 1 way 6A, complete all as specified and directed.

M&L for call bell AC 230 volt single pole complete all as specified and directed.

M&L for modular fan regulator, 120, W-2 module complete all as specified and directed.

M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 10 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC condiut of white /ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and directed . Note :- Two runs of 10 sqmm cable, one run of 10 sqmm cable and one run of PVC conduit will be measured as one unit.

S & F on distribution boards, MCCB three pole, 100 Amps, ultimate breaking cap 16 KA with adjustable thermal /electrical release for overload ranging from 70% to 100% of the rated current and fixed magnetic release for short circuit and under voltage release complete conforming to IEC 60947-2 and IS : 13947-3 with all accessories complete all as specified and directed.

Supply and fix Ceiling rose 3 termianl complete all as specified and directed

S&F for 20mm dia two way bib cock CP complete all as specified and directed.

S&F modular white cover plate with frame for module 3 incl modular metal flush box complete all as specified and as directed

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC casing caping with 6 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as directed. Note : two run 6sqmm and one run of earth wire 6sqmm and PVC conduit will be measured as one length.

S&F Isolator RCBO (Residual current breaker with over current protection) 40A, 240 volts all as specified and directed by Engr-in-Charge.

M&L Water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a) Taking down existing roof treatment with PCC pedding including cleaning & removing debris to a distance exc 100 m n.exc.250m. (b) Providing for 15 mm thick cement mortar with WPC in 1:4 over PCC when concrete is green. (c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per sqm conforming IS-3384. (e) APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 100 mm in longitudinal direction. (f) One coat of aluminium paint over APP membrane @0.11Kg/Sqm.

S&F MCB SP up to 40 Amp, 240 volt all as directed.

Material and labour for PVC rectangular block of size 25 cmx20cmx5cm depth, closed recessed 3mm thick plastic laminated sheet complete all as specified

S&F modular socket outlet 6A/16A- 2/3 pin combined 2 module complete all as specified and directed.

S&F LED Bulk Head fitting 9 Watt complete all as specified and directed by the Engineer-in-charge.

All as per serial item No 134 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Sheet metal enclosure for AD/DD DB’s suitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp rated bus bar all as specified and directed.

M&L for modular Bell push Switch single pole one way 6A/10Amps complete all as specified and directed.

All as per Item no 144 above but for 6 module complete all as specifed and as directed

Supply and fix LED Lamp pin type 9 watt all as sp

ecified and directed by the Engineer-In-charge.

All as per Item no 144 above but for 8module complete all as specifed and as directed

S & F LED light fitting 1 x 10 Watt T5 Alumnium batten type, indoor decorative PC housing extruded T5 Al LED battens with extruded aluminium housing and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed

Material and labour for Lamp holder, PVC / Polycarbonatetype with back plate suitable for batten fittings including connections complete all as specified and directed.

Supply and fixing exhaust fan 300 mm sweep, 1400 RPM with louver ,complete all as specified and directed.

Supply and fix PP-R Gate valves of size 25 MM outer dia (brass insert) as per requirement of the site complete all as specified and directed

Taking down and re-fixing, connecting existing electric meters, single phase all as specified and directed by Engr-in-Charge

Supply and fixing along wall GI pipe 15 MM medium grade with all fittings such as socketts, nipplle, unions, elbows, reducers, tee pieces etc fixed along the wall with hooks etc what ever is required at site or all as specified and directed by Eng- in- Charge