Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹51.0 L+₹1.1 L (2.20%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹51.4 L+₹1.5 L (3.03%)Rejected-Finance A 103 VEERA GARDEN AMBEDKAR NAGAR ALWAR 301001 RAJ | ALWAR | RAJASTHAN | 301001 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹55.4 L+₹5.5 L (11.0%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹62.7 L+₹12.8 L (25.7%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
28 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
SPL REPAIR TO BLDG NO P-100, P-642 (JCOS TOILET) AND PROVN OF BATHROOM AND TOILET NEAR BLDG NO P-84 UNDER AGE B/R-I AT ITARANA, ALWAR
2023_MES_573616_1
8122/E8
Open Tender
Civil Works
Item Rate
180 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹96,000
Yes
1 Mar 2023
7 Jan 2023
30 Jan 2023
7 Jan 2023
28 Jan 2023
22 Jan 2023
7 Jan 2023 - 21 Jan 2023
Amount
Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed.
Demolition of cement concrete (un-renforced) in ground floor and paving exc 15cm thickness (below or above ground level) & removal of rubbish material complete all as specified & directed.
Taking down Chowkatts or frames with shutters (without taking off shutters from the frame exc 1.5 sqm but n exc 4 sqm each & removing to store.
Taking down Chowkatts or frames with shutters (without taking off shutters from the frame n. exc 1.5 sqm each & removing to store.
Taking down shutter of any decription exc. 1 Sqm and n. exc 2 Sqm each and refixing in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable scews etc. Note: Dismentling of old chowkat and S&F new chowkhat shall be measured & paid for separately.
Taking down shutter of any decription exc. 1 Sqm and n. exc 2 Sqm each.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
Dismantling posts, purlins, or any part of truss, struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground or wall.
Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises
Taking down cement plaster any description on brick or stone any description complete all as specified & directed.
Taking up or down 15mm steel tubing and connections, complete all as specified& directed.
Taking up or down 20mm steel tubing and connections, complete all as specified & directed.
Dismantling/demolition water tanks of capacity exc 250ltr but not exc 500ltr and removing from site complete all as specified & directed.
Dismantling/demolition water tanks of capacity exc 500ltr but not exc 1000ltr and removing from site complete all as specified & directed.
Dismantling of 110mm bore PVC(SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.
Dismantling of 75mm bore PVC(SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed.
M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.
M&L solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified& directed.
S&F 35mm thick 2nd class hard wood factory made panelled door shutter(two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified& directed. Make Pioneer,Surbhi metal, A-1 Teak
S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified& directed.Make Pioneer,Surbhi metal, A-1 Teak
M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 pigmented stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed tinned tacks or GI wire stampe or nails and screws complete all as specified and directed
S&F sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane3mm in thickness complete all as specified& directed.
M&L preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified& directed.
S&F butt hinges 100mm long medium weight, stainless steel complete all as specified& directed.
S&F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed.
S&F 150mm 'D' type aluminium handles, type, anodised complete all as specified & directed.
S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed.
S&F steel ventilator with top hung shutter including hinges steel peg stay complete including taking down.
M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.
M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-
M&L flat iron as in hold fast, hooks, cleats welded to angle iron door/window frames etc complete all as specified and directed
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per item No 39.00 above but without glazing bar.
M&L preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.
M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) 25mm thick, as in Sub base complete all as specified & directed.
M&L non skid ceramic tiles 7 to 8mm thick (square / rectangular) colored tiles area of each tiles exc 0.11 sqm but n.exc. 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or coloure cement and over 15mm thick screed bed in CM 1:6 complete all as specified & directed.
S&F in repairs powder coated mild steel drapery rod of 20mm inner dia (in lengths as directed) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.
M&L machine cut kota stone slab flooring 20-25mm thick over cement slurry base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 15mm thick screed bed in CM 1:6 including rubbing and polishing complete all as specified and as directed.
M&L kota stone slab 10-15 mm thick in riser step, skirting, dado over 10mm thick rendering in CM 1:4 etc complete all as specified and as directed.
M&L false ceiling complete with armgyp-FB ceiling Tiles of Size 595x595,9mm thick (as approved by GE) fixed with and including galvanised iron Powder coated inverted 'Tee" or "L" section (Concealed GI frame Work) Suspended From Ceiling with provision of Galvanised wire 4mm dia and wall tapping screws including butterfly clips,hold down clips for fixing the board to frame complete all as per manufacturer's instruction,complete all as directed and specified.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws etc complete all as specified & directed.
S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified.
M&L 75 mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection finished fair and even complete all as specified& directed.
M&L glazed ceramic coloured tiles in vertical surface 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed.
M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types and over screed bed 20mm thick CM 1:6 cement complete all as specified & directed.
M&L plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall chajja including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified & directed.
M&L rendering 10mm thick in CM 1:6 on brick work or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified.
M&L rendering 15mm thick in CM 1:4 on brick or concrete wall surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound (water proof compound paid seperatly) all as specified.
Supply only integral water proofing compound.
M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.
M&L preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified & directed.
M&L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.
M&L preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified.
M&L preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint complete all as specified and directed.
M&L brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coats of white wash complete all as specified and as directed.
All as per item No 62.00 here-in-above but on ceiling surfaces.
M&L preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed.
M&L preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed.
S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed.
S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed.
S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed.
S&F rotational moulded polyethylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed.
S&F rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed.
S&F ball valves brass high pressure with polythelene float and fly net complete, screwed, iron pipes 15 mm dia complete all as specified & directed
S&F in repair fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed bore in dia 15mm complete all as specified & directed.
S&F in repair white vitreous china wash hand basin 'Flat back' of size 450mm x 300mm fixed on and including new brackets CP waste coupling and PVC Waste pipe complete all as directed.
S&F white vitreous china counter top basin size 450x525x195 mm shape oval of jaquar/cera or equivalent incl 32mm dia CP waste coupling complete all as specified and directed.
S&F in repair stop valves, fancy type, chromium plated alloy screwed down high pressure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed.
S&F stop valves, fancy type, chromium plated alloy screwed down high pressure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed.
S&F in repair stop/angle valves, fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified & directed.
S&F 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.
S&F in repair 15mm bore swan neck cast copper alloy pillar tap weight not less than 400gms screwed for iron pipe or brass ferrule fixed complete all as specified and directed.
S&F PVC waste pipe of 32mm bore of suitable length for WHB/Urinal/sink complete all as specified and directed.
S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repair vitreous china squatting pan, orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe etc complete including making food to floor complete all as specified & directed.
S&F vitreous china squatting pan, orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe etc complete including making food to floor complete all as specified & directed.
S&F 110mm PVC (SWR) WC connector bent type complete all as specified and as directed.
S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion complete all as specified.
S&F PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion complete all as specified.
S&F in repairs vitreous china urinals, bowl type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).
S&F vitreous China urinals, bowl type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).
S&F in repair 15mm dia CP pillar tap fancy type cast copper alloy, CP with capstan head, screwed down high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shank and fly nuts screwed for iron pipe and fixed complete all as directed.
S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges of Brass chromium plated complete all as directed.
S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges of Brass chromium plated complete all as directed.
S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.
S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints Laid to trenches complete all as specified & directed.
S&F PVC (SWR) bends any radius 110 mm bore complete all as specified & directed.
S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified & directed.
S&F PVC (SWR) vent cowl 110mm complete all as specified & directed.
S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed.
S&F PVC (SWR), 110mm junction single, (Single T) equal or unequal complete all as specified & directed.
M&L 75mm thick PCC(1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified & directed.
M&L 25mm thick sand cushioning under floors complete all as specified and directed.
M&L 60mm thick machine pressed precast conctete interlocking rubberized paver block with grey cement and pigment any shape and size confirming to IS 15658-2006, M-35 grade complete all as specified and as directed.
S&F in repair brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including removing the old pipes and making good the disturbed surface as per existing complete all as specified & directed.
Demolition Mud/PCC in roofs padding any thicknes, including plastering, existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed.
M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified & directed.
M&L screed laid 15mm thick in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified & directed.
M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces over bituminious primer complete all as specified & directed.
M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven reinforcement/mat (center core) with thermal insulation laid by toarch application method with overlaps 100mm on length side and 100mm on the width side as per manufacture,s instructions with fabric (wt not less than 150 gms/sqm) on primed surface complete all as specified.
Cutting holes in brick walls exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) all as specified & directed.
M&L precast RCC (1:2:4) type B-1 in manhole/soack well/septic tanks slabs/covers etc including necessary form work complete set in cement mortar 1:6 complete.
Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
S&F stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. to confirming to IS 116-1979 grade (medium grade all as specified and directed.
Treatment for sunken portion is as follows:- M&L water proofing treatment in sunken floors as described hereunder:- 1) Demelotion of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. 2) PCC (1:2:4) type B0, covered filling in sunken portion 75mm thickness shall be provided at the junctions of RCC slab and adjoining walls. 3) Sunken floor and sides upto finished floor level shall be plastered with 15mm thick plaster in CM 1:4 wixed with WPC@ 3% by weight of cement. 4) Applying bitumen primer of sunken floor & side surfaces TANKMASTIC of M/s STP Ltd @ 0.40 ltr/Sqm. 5) Sunken portion shall be filled with lean concrete (1:5:10), Type E-2 using 40mm aggregate after carring out of satisfactory testing of CIpipes/Joints & Slab/walls by filling water 72 hrs. The sunken portion of Nahani trap/floor trap and pipes, joints shall be emmbeded in PCC (1:3:6) blocks. 6) GI Spout pipe 32mm dia and 450mm long cross cutted ends shall be inserted at the time of repair to Sunken portion as directed. Note:- i) In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. This process of grouting and testing shall be repeated till leakage/seapage/dampness is elimaneted. ii) Horizontal flat area only measured. iii) Above aspets are deemed to be included in quoted rate.
Excavation in trenches, any type of soil n exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, erlls, cesspits, manholes, pier holes, etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out.complete all as specified directed.
Returning filling in incl spreading, leveling watering and well running in layers n.exc 25 cm.complete all as specified directed.
Removing excavated soil to a distance n. exc 50 mtr and depositing were directed at a level n. exc 1.5 mtr above the starting point.complete all as specified directed.
Precast RCC (1:2:4) type B-1 in manhole/soack well/septic tanks slabs/covers etc including necessary form work complete set in cement mortar 1:6 complete.
TMT Steel bars 6 to 8mm dia, cut to length bent to shape required including cranking bending spirally or hopping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 124.00 above but 5mm dia and over upto & including 10mm dia in stirrups, spaces & binder.
M&L PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregate in foundation, filling and mass concrete.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m radius, built in CM in 1:6.
M&L broken stone hard core of gauge n. exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface.
M&L reinforcement cement concrete work (Nominal Mix) Type B-1 1:2:4 (20 mm graded stone aggregate) as in foundations, including rafts footings, foundation beams; plinth beams : bases for columns etc; basement slabs, under-reamed piles and mass concrete.
All as per item No 129.00 above but in column.
All as per item No 129.00 above but as in roof, floor,shelves, slabs supported on walls, beams and columns in floors
All as per item No 129.00 above but in chajjas.
All as per item No 129.00 above but as in lintel,beams plinth beams etc.
M&L form work to soffits of suspended slabs such as roof slabs etc for rough finished concrete surface complete all as specified and directed.
M&L form work to chajja for rough finished concrete surface complete all as specified and directed.
M&L form work to side and soffit of roof beam etc for rough finished concrete surface complete all as specified and directed.
M&L form work for flat rough finished to sides of concrete foundations, footings, bases of columns, raft and raft beams, side and soffits (if any) of foundation and plinth beams and similar works; vertical or to batter.
M&L form work for flat rough finished to sides of concrete pillars, posts, struts, piers, columns and stanchions as square, rectangular or polygonal sides complete all as specified and as directed.
M&L form work to sides for slabs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide for fair finished concrete surface complete all as specified and directed.
M&L 15mm thick cement plaster in two layer first coat in CM 1:6,10cm thick & second layer 5mm thick in CM 1:4 mixed with WPC 3% by weight of cement including finishing fair & even on brick or concrete surfaces of other than fair faces complete all as specified and as directed.
M&L MS framed guard bars conforming to Fe-410-0 or Fe-310-0 welded to steel windows/ventilations complete all as specified and directed.
S&F vitreous china wash down water closet (Pedestal pattern) white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including provision for fixing including Plastic water closet seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete
S&F PVC (SWR) floor trap plain with greating incl jointing with solvent cement of size 75mm complete all as specified and as directed.
S&F gully trap stone ware square of round mounted type 'P' of SIze 150x150mm complete all as specified and as directed.
S&F 20mm dia stop valve of copper alloy screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union fixed complete all as specified and as directed.
S&F 15mm dia stop valve/Angle Valve of copper alloy screwed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union fixed complete all as specified and as directed.
S&F 15mm dia bib tap copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repair brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.
S&F 15mm dia CP pillar tap cast copper alloy with capston heads with or without lettered HOT or COLD screwed for iron pipe.
S&F PVC connection 15mm dia long of heavy grade screwed one end to inlet of WHB/Pillar tap/cistern etc complete incl brass union coupling on both ends conter ming to IS-3076 complete with connector for connection old water complete all as specified and as directed.
S&F PVC (SWR) bend 75 mm bore of any radius complete all as specified and as directed.
S&F PVC (SWR) branch piece single (Single Y) of 110 mm bore equal or unequal complete all as specified and as directed.
S&F salt glazed stone ware drain pipes grade 'A' ISI marked laid to slope in trenches, jointed in CM (1:1) and tested complete all as specified for 150mm bore of pipe complete all as specified and as directed.
S&F 4mm thick sheet glass of figured,pin headed and glazing with oil putty in square n exc 0.50 sqm in each complete all as specified and as directed.
S&F MS pressed bow handle of 100m Size oval type stove enamelled black & fixed all as specified.
M&L rendering 15mm thick in CM1:4 including water proofing compound @3% by wt of cement on roof slab while the slab is green complete all as specified and as directed.
M&L precast kerb stone built in PCC TypeB1 1:2:4 using 20mm graded stone aggregate and fixing in CM 1:4 all as specified and directed.
M&L brick work with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 complete all as specified and as directed.
M&L PCC 1:3:6, type C2, 40mm graded aggregate as in foundation of man holes, etc complete all as specified and as directed.
M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in band coping, bed plate, benching etc including slightly rounded or chamfered angle, throating, etc complete all as specified and as directed.
M&L PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in channels of man holes complete all as specified and as directed.
M&L loose filling of broken brick of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed.
S&F PVC (SWR) pipe single socket in any length with rubber ring joints 75mm bore laid in trenches of floors complete all as specified and as directed.
M&L PCC (1:4:8) type D2 using 40mm graded stone aggregate) in bed to drain pipe including packing under & haunching against the SIdes of drain pipes after they are laid and tested complete for 150mm bore pipe all as specified and directed.
S&F MS barrel tower bolt 150mm long stove enamelled black with bright bolt & fixed.
M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & directed.
M&L reinforced concrete pipes, class NP2, laid and jointed complete with collars 150mm bore complete.
Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar of 150mm internal dia of pipe including haunching, bedding etc complete.
Taking down carefully copper/aluminium point wiring for one light /socket/power point and taking down of teak wood batten/ PVC casing caping and making good disturbed surfaces of walls/ ceiling/ floors etc including dismentling of fittings complete all as specified.
M&L point wiring for one light point controlled by one, one way switch with multistrand 1.5 Sqmm unsheathed copper conductor PVC insulated FRLS cable including continuous earth wire 1.5 Sqmm in green colour unsheathed copper conductor PVC insulated FRLS cable connected to common earth dolly in concealed PVC conduit 25 mm with accessories by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS in on New wooden boards fixed on wall for mounting switch, socket, regulators etc with and including 3mm thick phenolic laminated sheet top cover complete all as specified.
All as per item No 170.00 here-in-before but for one fan point controlled by one switch and regulator.
All as per item No 170.00 here-in-before but for one exhaust fan point controlled by one switch and regulator.
All as per item No 170.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
All as per item No 170.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
All as per item No 170.00 here-in-before but for one light point controlled two, two way switches.
All as per item No 170.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlledby one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.
S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.
S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.
S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.
S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.
S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.
S&F stepped type electronic fan regulator, flush type and connecting up ISI marked 240 volts complete all as specified & directed.
S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed.
S&F LED type street DRACO Series light luminaire 20 watt 230V, 50Hz including all necessary fitting accessories and LED complete all as specified & directed.
S&F LED bulb 10/11 watt complete all as specified and directed.
S&F lamp holder PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified.
S&F sheet metal enclosures, double door type, suitable for fixing TPN with 200 Amps rated bus bar, vertical DB-4 way TPN 415 volts complete all as specified and directed.
S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.
S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 4 way, 240 volts complete all as specified and directed.
S&F MCB 63 Amps, triple pole & neutral, 415 Volts complete all as specified and directed.
S&F MCB 32/40 Amps, single pole & neutral, 240 Volts complete all as specified and directed.
S&F MCB 6-40 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed.
S&F 2nd class hard wood rectangular block open recessed of size 30 x 25 x 5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos), complete all as specified and directed.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 25 sqmm 4 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
Excavation in trenches n.exc 1.5M wide and n.exc 1.5M in depth for foundation and getting out in soft/loose soil all as specified and directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm deep as in soft/loose soil copletete all as specified.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point.
M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.
M&L dry sand (tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.
S&F sub main wiring on including passing throuh PVC conduit pipe 1100 volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 Sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing unserviceable sub main wiring. (Note : Two runs of cable with one run of earth wire and one run of PVC casing caping should measured as one length).
M&L 40mm grade GI pipe (light grade) for protection of LT cable fixed to wall /pole /road crossing including clamps complete all as directed.
Disconnecting from elect connection and taking down carefully the existing ceiling fan/exhaust fan/geyser of any capacity any make, any size and depositing the same in AGE E/M Store Yard all as specified and directed. Refixing the same ceiling fan/exhaust fan/geyser carefully including necessary electric connections complete all as directed.
M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point /panel/ equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.
shiva construction
Hitesh Construction
KARTIK ENTERPRISES
M/s Laxmi Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .