Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.6 LAccepted-AOC 901 GH 83 SECTOR 20 PANCHKULA 134116 | PANCHKULA | HARYANA | 134116 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹23.2 L+₹3.3 L (16.4%)Rejected-Finance 195 MAHESH NAGAR AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹23.6 L+₹3.7 L (18.5%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
Refer Docs
EMD Value
₹52,650
Closing Date
11 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Patiala
HQ CWE , Bldg No 26, New Lal Bagh, Patiala 147001
REPAIR MAINTENANCE OF HT DISTRIBUTION NETWORK IN ADM AND DOMESTIC AREA AT FAD DAPPAR UNDER GE PROJECT DAPPAR
2022_MES_551121_1
8322/PAT/T-28/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Dappar
As per cover 1
6 documents required · 6 mandatory
₹500
Yes
GE Project Dappar
₹52,650
Yes
21 Oct 2022
10 Sept 2022
13 Oct 2022
10 Sept 2022
11 Oct 2022
3 Oct 2022
10 Sept 2022 - 17 Sept 2022
Amount
Supplying, installing, testing and commissioning in replacement of old GODs complete HT 11 KV, 200 Amp outdoor type gang operated single air-break switch, triple pole, tilting type, vertical mounting, mechanically operated consisting of hot dip galvanised channel iron base having 3 Nos 11 KV Post type insulator in stack - 3 stack per phase, copper or copper alloy high pressure heavily tinned contacts, MS arcing horns capable of breaking the magnetizing current with operating mechanism worked from ground level complete with horizontal connecting square bar, GI pipe of size not less 25mm dia, medium grade and of suitable length as down rod levers coupling & operating handle with locking arrangement connected with new ACSR conductor (jumper) - set of 3 duly logged incoming and out going with steel nut bolts and washers including dismantling and taking out old switch and connections complete complying to IS 9921/1985 (Part I to IV) or its latest amendment all as specified and as directed. NOTE - The quoted rate is deemed to be inclusive of cost of cutting, welding, drilling etc. and other jobs including cost of nut, bolts, washers, etc. minor items required for the efficient operation of GOD.
Supply and install drop out fuse in replacement of old DOs complete, HT 11 kV, 200 Amps fuse link consisting of channel iron base having 1 No 11 KV post type insulators in stack & 2 stack per phase complete with fuse carrier of SRBP tube with heavily tinned non ferrous metal parts and spring loaded phosphor bronze contact complete manufactured as per IS 9385 complete all as specified and directed. NOTE - The quoted rate is deemed to be inclusive of cost of cutting, welding, drilling etc. and other jobs cost of nut, bolts, washers, etc. minor items required for the efficient operation of DO fuse unit.
Supply, laying in replacement, in trenches /ducts/fixing on pole/STR with suitable size of GI clamps made out of GI strip 32 mm x 6 mm, XLPE insulated, screened, earthed, PVC bedded, galvanised steel strip, electric power cable (heavy duty) of size 3 x 120 sqmm with aluminium conductor suitable for 11 KV (E) grade as per relevent IS including latest amendment for IS testing, commissionong along with S&F for HT cable route indicator for every 100 m with suitable PCC Foundation complete all as specified and directed including taking out of old burnt out cable alongwith cable covers. Note:- (a) Earth work, EHV cable cover, sand coushioning & GI pipe GI strip clamps will be measured and paid seperately. (b) High voltage test to be conducted at site with suitable voltage before and after laying of HT cable and reading shall be recorded jointly and test report to be submitted in triplicate to the Engineer-in-Charge. The cost of the same shall be deemed to be included in the unit rate quoted above.
All as per srl item No. 03 above but XLPE insulated, screened, earthed, PVC bedded, galvanised steel strip, electric power cable (heavy duty) of size 3 x 95 sqmm with aluminium conductor suitable for 11 KV (E) grade.
Excavation in trenches for not exc 1.5 mtr wide and not exc 1.5 mtr depth and getting out in soft/loose soil including taking out faulty cable/cable, cable covers and GI pipe complete all as specified and directed.
M & L sand cushioning (dry sand) to underground cable for cable protection 23 cm thick in two layers (8 cm thick before laying of cables and 15 cm thick after laying the cable and punning down the sand to 18 cm thickness.). Complete all as specified and as directed by Engineer-in-Charge. (Note:- Only punned thickness 18 cm of sand shall be measured for payment purposes).
Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point.
Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed.
Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1, flat, size 300mmx 180mm x 40mm complete all as specified and directed.
Supply and fixing in replacement aluminium conductor, steel reinforced, of size 6/1 x 2.59 mm (Weasel) straining properly on insulators with and including aluminium tape/winding wire, clamps & jumpers etc. complete all as specified. Note : 3% for sag shall be added in measurement
S&F in replacement Danger notice plate of 1.6 mm thick mild steel sheet vitreous enamelled white, with letters figures and conventional skull and bones in signal red colour and fixed with MS clamps bolts and nuts of approved size for HT 11 KV of size 25 x 20 cm.
Dismantling of unserviceable cross arms of MS Chanel/angle sections etc complete all as specified and directed.
M&L cross arms, bracing, supports, clamps and back plates fabricated from structual steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicted and inclusive of one primer coat one under coat and two finishing coat of aluminium paint.
Dismantling of unserviceable insulator any type and any size.
M&L for disc insulator porcelain vitreous brown 145 mm height & 225 mm dia ball and socket type two in series assembly with cast aluminium 4 U bolt tension hardware and tension clamps for conductors working pressure HT 11 KV complete all as specified and directed.
S&F in replacement Male contact (gunmetal) suitable for vertical operating type GOD 11 KV grade, 200 Amps rating in position as in replacement including testing and commissioning to the complete satisfaction of Engr-in-Charge.
S&F in replacement Female gunmetal contact suitable for vertical operating type GOD 11 KV grade, 200 Amps rating in position as in replacement including testing and commissioning to the complete satisfaction of Engr-in-Charge.
S&F in replacement Tinned copper flexible jumper for 11 KV grade, 200 Amps rating in position as in replacement including testing and commissioning to the complete satisfaction of Engr-in-Charge.
S&F in replacement for fixed type top contact for DO fuse units 11 KV in replacement complete all as specified and as directed.
S&F in replacement for fixed type bottom contact for DO fuse units 11 KV in replacement complete all as specified and directed.
Supply and fix in replacement GI pipe of size 25mm dia, medium grade, as down rod levers coupling & operating handle of the existing GOD cut to suitable length including fixing up the same and commissioning of the respective GOD complete. NOTE - The quoted rate is deemed to be inclusive of cost of threading, cutting of pipe incld. cost of nut, bolts, washers, etc. minor items required for the efficient operation of GOD.
S&F in replacement GI pipe of light grade laid in trenches/fixed on pole with suitable clamp all as specified for 100 mm bore of pipe for protection of UG cable complete all as specified and as directed.
M & L for servicing, greasing, cleaning of GOD, adjustment of its operation, cleaning and checking (for any type of damage) of insulators and lightening arresters incl. tightening of all loose nuts & bolts on the HT structure at site complete all as specified and directed by Engineer-in-Charge. NOTE :- 1. All the necessary tools, tackles and ladder shall be arranged by the contractor. 2. Contractor has to arrange for necessary cleaning agent (petrol, diesel, CRC 2-26 etc.) and lubricating material like grease, oil and lubricating sprays if any, required. 3. Major spares required to be replaced during servicing shall be measured and paid seperately.
M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below the normal ground level connected with GI strip 32 x 6mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4), type B1,using (20mm graded stone aggregate),"mild steel angle iron frame" made out of MS angle iron of size 40x40x6mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering 40mm dia light grade, GI pipe for lead protection in and including alternate layers of charcoal dust and common salt complete all as shown in electrical "plate No '3' and connected to earthing test point complete all as specified and as directed. NOTE :- Unit rate quoted by contractor shall be deemed included for taking out serviceable materials from old earthing for which necessary credit shall be affforded by the contractor as per schedule of credit .
S&F in repairs GI strip 32 x 6mm as earth continuity conductor or main earthing lead fixed to wall on batten or fixed to pole complete all as specified and as directed.
S&F in repairs heavy duty station class, Gap less type Metal oxide lightning arrestors, 12 kV of 10kA rupturing capacity complete with all fittings distribution class suitable for 11KV earthed system discharge capacity 65 Kilo Amps complete all as specified and directed. Modifications to support structure as per OEM Requirements shall be the scope of Contractor. No Extra payment will be entertained on this account
S&F in repairs Heat shrinkable outdoor type end termination cable jointing kit suitable for earthed 3 core 120/185 sqmm HT 11KV XLPE aluminium conductor cable incld. disconnecting concerned cable, cutting out burnt/damaged jointing kit, jointing new kit inld. testing and commissioning of the complete cable to the complete satisfaction of Engr-in-Charge all as specified and directed. Make:- Raychem/M-Seal/Denson. NOTE- a. The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge. b. Contractor has to arrange proper electrical shutdown after informing to depratment concerned.
S&F in repairs Heat shrinkable outdoor type end termination cable jointing kit suitable for earthed 3 core 95 sqmm HT 11KV XLPE aluminium conductor cable incld. disconnecting concerned cable, cutting out burnt/damaged jointing kit, jointing new kit inld. testing and commissioning of the complete cable to the complete satisfaction of Engr-in-Charge all as specified and directed. Make:- Raychem/M-Seal/Denson. NOTE- a. The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge. b. Contractor has to arrange proper electrical shutdown after informing to depratment concerned.
S&F in repairs Heat shrinkable outdoor type end termination cable jointing kit suitable for earthed 3 core 240 sqmm HT 11KV XLPE aluminium conductor cable incld. disconnecting concerned cable, cutting out burnt/damaged jointing kit, jointing new kit inld. testing and commissioning of the complete cable to the complete satisfaction of Engr-in-Charge all as specified and directed. Make:- Raychem/M-Seal/Denson. NOTE- a. The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge. b. Contractor has to arrange proper electrical shutdown after informing to depratment concerned.
S&F in repairs Heat shrinkable indoor type end termination cable jointing Kit suitable for earthed 3 core 95Sqmm HT 11kV XLPE aluminium conductor cable.including disconnecting concerned cable, cutting out burnt/damaged jointing kit, jointing new kit inld. testing and commissioning of the complete cable to the complete satisfaction of Engr-in-Charge all as specified and directed. Make:- Raychem/M-Seal/Denson. NOTE- a. The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge. b. Contractor has to arrange proper electrical shutdown after informing to depratment concerned.
S&F in repairs Heat shrinkable indoor type end termination cable jointing Kit suitable for earthed 3 core 120 Sqmm HT 11kV XLPE aluminium conductor cable.including disconnecting concerned cable, cutting out burnt/damaged jointing kit, jointing new kit inld. testing and commissioning of the complete cable to the complete satisfaction of Engr-in-Charge all as specified and directed. Make:- Raychem/M-Seal/Denson. NOTE- a. The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge. b. Contractor has to arrange proper electrical shutdown after informing to depratment concerned.
S&F in repairs Heat shrinkable indoor type end termination cable jointing Kit suitable for earthed 3 core 240 Sqmm HT 11kV XLPE aluminium conductor cable.including disconnecting concerned cable, cutting out burnt/damaged jointing kit, jointing new kit inld. testing and commissioning of the complete cable to the complete satisfaction of Engr-in-Charge all as specified and directed. Make:- Raychem/M-Seal/Denson. NOTE- a. The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge. b. Contractor has to arrange proper electrical shutdown after informing to depratment concerned.
S&F in repairs Heat shrinkable straight through cable jointing kit suitable for earthed 3 core 185/120 sqmm HT 11 kV XLPE aluminium conductor cable incld. disconnecting concerned cable, cutting out burnt/damaged jointing kit, jointing new kit inld. testing and commissioning of the complete cable to the complete satisfaction of Engr-in-Charge all as specified and directed. Make:- Raychem/ XICON/ M-Seal/Denson. NOTE- (a). The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge. (b). Contractor has to arrange proper electrical shutdown after informing to depratment concerned. (c). Cost of connected excavation, soil removal, returning filling in, sand cusshioning and cable covers will be measured and paid in the respective items of the Schedule.
S&F in repairs Heat shrinkable straight through cable jointing kit suitable for earthed 3 core 95 sqmm HT 11 kV XLPE aluminium conductor cable incld. disconnecting concerned cable, cutting out burnt/damaged jointing kit, jointing new kit inld. testing and commissioning of the complete cable to the complete satisfaction of Engr-in-Charge all as specified and directed. Make:- Raychem/ XICON/ M-Seal/Denson. NOTE- (a). The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge. (b). Contractor has to arrange proper electrical shutdown after informing to depratment concerned. (c). Cost of connected excavation, soil removal, returning filling in, sand cusshioning and cable covers will be measured and paid in the respective items of the Schedule.
S&F in repairs Heat shrinkable straight through cable jointing kit suitable for earthed 3 core 240 sqmm HT 11 kV XLPE aluminium conductor cable incld. disconnecting concerned cable, cutting out burnt/damaged jointing kit, jointing new kit inld. testing and commissioning of the complete cable to the complete satisfaction of Engr-in-Charge all as specified and directed. Make:- Raychem/ XICON/ M-Seal/Denson. NOTE- (a). The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge. (b). Contractor has to arrange proper electrical shutdown after informing to depratment concerned. (c). Cost of connected excavation, soil removal, returning filling in, sand cusshioning and cable covers will be measured and paid in the respective items of the Schedule.
M&L Anti-climbing device; spikes type square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole
M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed. NOTE - (a). Cost of cutting out of trench for accomodating the machine and making good to the surface after completion of the job are deemed to be inclusive in the quoted rate. (b). Contractor has to rectify any damage to cables, pipes or other govt. property free of cost to the complete satisfaction of Engr-in-Charge.
Preparation of old painted steel surfaces after removal of old paint, rust, dust, oil, grease and any other foreign deposits by paint removers or burning off by blow lamps and cleaning with scrapers and chemicals for removal of rust for any number of coats, any width or girth of poles and applying two coat of aluminium paint including painting five number strips of 30 cm each at bottom of pole with black and red colour paint, alternately complete all as specified and as directed.
M&L for writing letters or figures (Block. Roman, Italic or Indian) of 2cm high on any surfaces with any colour paint all as specified and directed by Engr-in-Charge.
ACP (aluminium composite panel) 4 mm thick composed of non combustible virgin LDPE laminated sandwitched between two fine aluminium sheets 0.25mm thick on both sides painted with blue colour polyster paint inclusive of folding and cutting with machine to obtain require shape and size fixing the same on M.S. channels/Poles, wall, etc. with nuts/bolts or screws/anchor fasteners, etc. complete all as directed and specified.
S&F in replacement stay assembly complete with accessories as shown in electric plate No.I including loop type insulator, stay clamps etc complete all as specified & directed with diameter of stay 20 mm of stay rod complete all as specified & directed. Note: - Loop type insulator, PCC foundation, Exc & earth work & GI stay strand will be measured and paid seperately under relevent items of Sch 'A'
S&F in replacement Galvanised wire stay strand 7/2.24 mm complete all as specified and as directed.
M&L for loop type insulators, porcelain, vitreous white, brown or green large size, with overall dimentsions 140 mm, clearance of hole 25.5 mm
Repairs and maintenence of 11 KV 400A HV VCB Crompton make, 50 Hz yearly as under :- (i). Ensuring the switching OFF operation of the VCB positively by racking it out at service position & testing its manual & electrical ON-OFF operations by applying control panel supply source, repair/replacement of the defective components. (ii). After ensuring the VCB is in isolated position, inspection of entire breaker mech parts like, breaker ON OFF operations, mech gear drive assy, closing & tripping mechanisms, spring charging indications, ON-OFF mechanical indications, condition of main closing & tripping spring assy, allied hardwares & it's tightness and alignments. (iii). Inspection of Electrical parts - motor assy, aux block operations, tripping & closing coil operations, main male-female contacts, insulating material, insulating oil healthiness, etc.(iv). Checking operation of relays. (vi). Checking and recording of IR value of VCB trolley and panel.(vii). Checking/repairing/rectification of the control wiring. . (xi). Checking & updating all mech + electrical critical settings of VCB like closing & tripping & trouble free operations. (xii). Checking VCB manual ON-OFF operations by local closing & tripping push assy. (xiii). Checking VCB electrical ON-OFF operations by applying control supply source. VCB should switch ON & OFF by breaker ON-OFF control switch which in installed on control panel. VCB tripping operations to be checked using protection relay units like LSIG realy + master trip realy units + other tripping units installed in the breaker. (xiv). Ensuring if VCB is in trip position, it should not re-close again, even when closing command is applied. (xv). Ensuring VCB's positive & trouble free performance in service position by switching ON the plant load. (xvi). Checking fibre plates, gaskets, , applying properly with LICOM 2 HPCL make/Balmier Lawire make grease or equivalent one using help of grease gun to VCB cradle, racking in-out assy, mech rubbing parts + bushing assy & dry graphite conductive sealant to contacts of PT etc. & re-assembling the same and commissioning complete to the entire satisfaction of Engr-in-Chrg. incld. testing of polarities of CTs. (xvii). High voltage testing with high voltage tester of CT & Breaker pole to with stand working pressure of HT 22 KV to ascertain servicieability and spare parts found defective to be replaced for smooth functioning as directed by Engr-in-Chrg. (xviii). Labour only for opening the busbar chamber of HT board cleaning the bus bar chamber, cleaning of entire dust in side the control panel + VCB by using dry air pressure, inspect the CT's wiring, spout insulator & bus-bar joints & tightening if required & heating up with hot air blower to remove moisture, meggering, HV testing applying TRTPPEX(B) Note : Supply only spares used in this job shall be measured and paid seperately in suceeding items.
Supply only Charging Spring Motor as spares of VCB.
Supply only Closing Coil as spares of VCB.
Supply only Tripping Coil as spares of VCB.
Supply only Gear set as spares of VCB.
Supply only Motor cut off switch as spares of VCB.
Supply only ZZ Swithch as spares of VCB.
Supply only LED indicator as spares of VCB.
Supply only TNC as spares of VCB.
Supply only CT 100/5 as spares of VCB.
Supply only Over current + earth fault relay as spares of VCB.
Supply only PT as spares of VCB.
Supply only Multifunction Energy meter (as spare of VCB) for measurement of Volts, Amps, PF, THD, F, W, Wh, VA, VAh, Var, Varh Make : Schneider Cat Part No. METSEEM6400NGRSCL2 or equivalent in HPL/L&T/Ashida Electronics complete as per existing opening. Modification of panel, if any, will be done by the contractor without any extra cost to the govt.
Repairs and maintenence of 11 KV 800A HV VCB Crompton make, 50 Hz yearly as under :- (i). Ensuring the switching OFF operation of the VCB positively by racking it out at service position & testing its manual & electrical ON-OFF operations by applying control panel supply source, repair/replacement of the defective components. (ii). After ensuring the VCB is in isolated position, inspection of entire breaker mech parts like, breaker ON OFF operations, mech gear drive assy, closing & tripping mechanisms, spring charging indications, ON-OFF mechanical indications, condition of main closing & tripping spring assy, allied hardwares & it's tightness and alignments. (iii). Inspection of Electrical parts - motor assy, aux block operations, tripping & closing coil operations, main male-female contacts, insulating material, insulating oil healthiness, etc.(iv). Checking operation of relays. (vi). Checking and recording of IR value of VCB trolley and panel.(vii). Checking/repairing/rectification of the control wiring. . (xi). Checking & updating all mech + electrical critical settings of VCB like closing & tripping & trouble free operations. (xii). Checking VCB manual ON-OFF operations by local closing & tripping push assy. (xiii). Checking VCB electrical ON-OFF operations by applying control supply source. VCB should switch ON & OFF by breaker ON-OFF control switch which in installed on control panel. VCB tripping operations to be checked using protection relay units like LSIG realy + master trip realy units + other tripping units installed in the breaker. (xiv). Ensuring if VCB is in trip position, it should not re-close again, even when closing command is applied. (xv). Ensuring VCB's positive & trouble free performance in service position by switching ON the plant load. (xvi). Checking fibre plates, gaskets, , applying properly with LICOM 2 HPCL make/Balmier Lawire make grease or equivalent one using help of grease gun to VCB cradle, racking in-out assy, mech rubbing parts + bushing assy & dry graphite conductive sealant to contacts of PT etc. & re-assembling the same and commissioning complete to the entire satisfaction of Engr-in-Chrg. incld. testing of polarities of CTs. (xvii). High voltage testing with high voltage tester of CT & Breaker pole to with stand working pressure of HT 22 KV to ascertain servicieability and spare parts found defective to be replaced for smooth functioning as directed by Engr-in-Chrg. (xviii). Labour only for opening the busbar chamber of HT board cleaning the bus bar chamber, cleaning of entire dust in side the control panel + VCB by using dry air pressure, inspect the CT's wiring, spout insulator & bus-bar joints & tightening if required & heating up with hot air blower to remove moisture, meggering, HV testing applying TRTPPEX(B) Note : Supply only spares used in this job shall be measured and paid seperately in suceeding items.
Supply only Charging Spring Motor as spares of VCB.
Supply only Closing Coil as spares of VCB.
Supply only Tripping Coil as spares of VCB.
Supply only Gear set as spares of VCB.
Supply only Motor cut off switch as spares of VCB.
Supply only ZZ Swithch as spares of VCB.
Supply only LED indicator as spares of VCB.
Supply only TNC as spares of VCB.
Supply only PT as spares of VCB.
Supply only CT 200/5 as spares of VCB.
Material & Labour for cement concrete 1:4:8 type D- 2 using 40mm graded crushed stone aggregate in foundation filling & mass concrete for poles/struts/stays assembly complete all as specified and directed by Engr-in-Charge.
Material & Labour for cement concrete 1:2:4 type B - 1 using 20mm graded crushed stone aggregate in coping pedestal to poles including provision of necessary frame work finishing the expossed surface even and smooth complete all as specified and directed by Engr-in-Charge.
Supply and erection (including taking down old) steel tubular swaged poles welded with with cast iron base plate of size 30cmx30cmx6mm thick finial taper plug bolts nuts & screws as specified type 410 SP 55, 11m long in truly vertical position till setting of PCC foundation complete including painting with two coats of aluminium paints of approved quality over one coat of red oxide primer as exposed surface & two coat bitu-mineous paint for embedded portion incl. painting five no. strips upto 30 cm on bottom of the pole with black and red colour paint alternately all as specified and directed. Note :- Excavation of post hole, PCC required for foundation and coping will be measured & paid under relevant items of Sch 'A'.
M&L for complete overhauling, testing, calibrating and commissioning of numerical relay / electro mechanical relay -1 UV/OV relay + 1 earth fault / O/C + 1 master trip relay by secondary injection on each multiple settings of relays by injecting artificial load to ascertain correctness completely including primary injection through CTs by injecting artificial load on each multiple setting of relay to check correctness as well setting the relay at the settings which is incoordination with the PSPCL Lalru sub-station (source) and as per the further downstream distribution of HV breakers complete all as specified and directed. NOTE : (a) The contractor has to test the functioning / tripping operations of relay caliberated to the complete satisfaction of Engineer in Charge alongwith the two copies test reports. A total numbers of three hard copies and one soft copy (CD) of the reports shall be submitted. (b) The contractor has to arrange for electrical shutdown prior to carry on repairs including switching OFF of VCB positively and racking it out at service position.
M&L in replacement of Charging Spring Motor of RMU 400A of Make - ABB Cat Part No. 1VTB84C complete all as specified and as directed.
M&L in replacement of Closing coil of RMU 400A of Make - ABB Cat Part No. 1VTB84C complete all as specified and as directed.
M&L in replacement of Tripping coil of RMU 400A of Make - ABB Cat Part No. 1VTB84C complete all as specified and as directed.
M&L in replacement of Gear Set of RMU 400A of Make - ABB Cat Part No. 1VTB84C complete all as specified and as directed.
M&L in replacement of Motor Cut off switch of RMU 400A of Make - ABB Cat Part No. 1VTB84C complete all as specified and as directed.
M&L in replacement of ZZ switch of RMU 400A of Make - ABB Cat Part No. 1VTB84C complete all as specified and as directed.
M&L in replacement of LED Indicator of RMU 400A of Make - ABB Cat Part No. 1VTB84C complete all as specified and as directed.
M&L in replacement of Topping up of SF6 gas of RMU 400A of Make - ABB Cat Part No. 1VTB84C complete all as specified and as directed.
M&L in replacement of Auxillary relay of RMU 400A of Make - ABB Cat Part No. 1VTB84C complete all as specified and as directed.
Raman Electric Trading Co
Kaul Enterprises
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .