PROVISION OF HARD STANDING, BOAT SHED AND INTERLOCKING TILES AT PEACOCK BAY AT NDA KHADAKWASLA

Amount

Surface dressing not exc 15 cm deep and getting out soft/loose soil

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out soft/loose soil

M& L for Moorum / red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, leveled and rammed including watering

M& L for Hard-core of broken stone gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface etc complete all as directed

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

Material and labour Cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete as specified

M&L Structural Steel work as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410-W (Gde E-250) quality A

M&L Structural Steel work as in plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment

M&L Structural Steel work as in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality A

M&L Structural Steel work as in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe 410-W (Gde E-250) quality A

ML For Joist channel, angle, or Tee section fixed independently, without connecting plate etc, Fe -410-W (Gde-E-250) Quality -A

Preparation of new or previously untreated steel surface of nay description over 10 cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over and including a coat zinc primer

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc

Material and labour 75mm thick Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as sub base complete as specified

M&L for providing laying 80mm thick factory made chamferd edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawn, drive way or light traffic parking etc of required strength , thickness & size/ shape made by table vibratory method using PU mould , laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, campacting and proper embeding / laying of inerlocking paver block into sand bedding layer through vibratory campaction by using plate vibrator , filling the joints with sand and cutting of paver block as per required size and pattern , finishing and sweeping extra sand. Complete all as specified.

M & L 150mm thick 1:4:8 (40mm Graded Cement concrete in foundations, filling and mass-concrete

M&L for Fly ash brick masonry straight or curved on plan exc 6m mean radius in CM (1:4).

M & L Providing cement concrete in copings type B1 (1:2:4)) (using 20mm graded stone aggregate) including necessary formwork complete all as specified.

M & L for Cement concrete in surface channels and drains avg 50 mm thick type B0 1:2:4, 12.5 mm agg

Material and labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 surfaces, finished even and smooth (without using extra cement) complete

M & L for Providing perforated precast cement concrete type B1, 1:2:4 20 mm aggregate in landings for cover slabs chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces. and setting in mortar complete with joints to match set in CM 1:6

M & L Mild steel TMT bars for manhole 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for providing mild steel TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders

Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point (Soil)

Material and labour for preparation of new plastered surfaces applying two coats of cement base paint on wall surface complete

M&L for filleting in ay position and to any shape in cement mortar (1:4) section not exc 25 Sqm

Pranjal Associates

Raj Construction Company

M/S Narendra Construction

PAWAN B SHINDE

Sayili Enterprises

Prem Singh

YUVRAJ CONSTRUCTIONS

Mehta and Co.