Construction of a building for the record room and technical section within lokapur town panchayat office-2

¯ÉÆÃPÁ¥ÀÆgÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ PÀZÉÃjUÉ EAf¤AiÀÄjAUï ±ÁSÉAiÀÄ PÉÆoÀr ¤ªÀiÁðt ºÀAvÀ-2 gÀ PÁªÀÄUÁjAiÀÄ£ÀÄß PÉÊUÉƼÀÄîªÀÅzÀÄ.

TOWN PANCHAYAT,LOKAPUR

[Paragraph 130 (a) of the Karnataka Public Works Department Code]

Sanctioned Estimate No. :

Estimate framed in the office of the ENGINEERING SECTION,TOWN PANCHAYAT LOKAPUR

Estimate for the work

¯ÉÆÃPÁ¥ÀÆgÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ PÀZÉÃjUÉ EAf¤AiÀÄjAUï ±ÁSÉAiÀÄ PÉÆoÀr ¤ªÀiÁðt ºÀAvÀ-2 gÀ PÁªÀÄUÁjAiÀÄ£ÀÄß PÉÊUÉƼÀÄîªÀÅzÀÄ.

Estimated Cost 6.00 Lakhs

Administratively approved under No. Date :

Technically sanctioned under No. Date :

Estimate prepared by : Sri Prashant.A.Patil JE

Checked by : Sri

Junior Engineer Chief Officer

Town Panchayat Town Panchayat

Lokapur Lokapur

¯ÉÆÃPÁ¥ÀÆgÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ

¸ÁªÀiÁ£Àå ªÀgÀ¢

¯ÉÆÃPÁ¥ÀÆgÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ PÀZÉÃjUÉ EAf¤AiÀÄjAUï ±ÁSÉAiÀÄ PÉÆoÀr ¤ªÀiÁðt ºÀAvÀ-2 gÀ PÁªÀÄUÁjAiÀÄ£ÀÄß PÉÊUÉƼÀÄîªÀÅzÀÄ.

¯ÉÆÃPÁ¥ÀÆgÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ ªÁå¦ÛAiÀÄ°èæ UÁæªÀÄ ¥ÀAZÁAiÀÄvÀ¢AzÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ zÀeÉðUÉ G£ÀßwPÀgÀtUÉÆÃArzÀÄÝ CzÀgÀAvÉ ¸ÁªÀðd¤PÀjUÉ ¤gÀAvÀgÀªÁV ªÀÄÆ®¨sÀÆvÀ ¸Ë®¨sÀåUÀ¼À£ÀÄß PÀ°à¸ÀĪÀzÀÄ ¯ÉÆÃPÁ¥ÀÆgÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ DzÀå PÀvÀåðªÀåªÁVgÀÄvÀÛzÉ ªÀiÁ£Àå DqÀ½vÁ¢üPÁjUÀ¼ÀÄ, ¯ÉÆÃPÁ¥ÀÆgÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ gÀªÀgÀÄ QæAiÀiÁ AiÉÆd£É gÀƦ¹ C£ÀĪÉÆzÀ£ÉUÁV f¯Áè¢üPÁjUÀ¼ÀÄ,f¯Áè¢üPÁjUÀ¼À PÁAiÀiÁð®AiÀÄ ,¨ÁUÀ®PÉÆl gÀªgÀÄ QæAiÀiÁ AiÉÆd£ÉUÉ ªÀÄAdÆgÁwAiÀÄ£ÀÄß ¤rzÀÄÝ EgÀÄvÀÛzÉ ,CzÀgÀAvÉ __F ªÉÄð£À__PÁªÀÄUÁjAiÀÄ£ÀÄß PÉåUÉƼÀÄîªÀzÀÄ ¸ÁªÀðf¤PÀgÀ »vÀ zÀȶ׬ÄAz Cw CªÀ±ÀåPÀªÁVzÀÄÝ , PÁgÀt CAzÁdÄ ¥ÀwæPAiÀÄ£ÀÄß vÀAiÀiÁj¹zÀÄÝ ¸À£ï 2023-24 ¸Á°£À ¯ÉÆPÉÆ¥ÀAiÉÆV E¯ÁSÉ(«zÀÄåvï/¹«í¯ï)/ PÁªÀÄUÁjUÀ¼À KPÀgÀÆ¥À C£ÀĸÀÆa zÀgÀ¥ÀnÖ : 2023-24 ¸ÀÀA¥ÀÅl – 5/ºÉ¸ÁÌA zÀgÀUÀ¼À£ÀÄß C¼ÀªÀr¹PÉÆÃAqÀÄ CAzÁdÄ ¥ÀwæPÉAiÀÄ£ÀÄß vÀAiÀiÁj¹zÀÄÝ vÁAwæPÀ C£ÀĪÉÆÃzÀ£ÉUÁV ªÀÄvÀÄÛ ¤AiÀĪÀiÁ£ÀĸÁgÀ F-¥ÀæPÀÆågÀªÉÄAl mÉAqÀgÀ PÀgÉAiÀÄ®Ä ªÀÄAr¹zÉ.

Estimate Cost : 6.00 Lakhs

¸ÀzÀj CAzÁdÄ ¥ÀwæPÉAiÀÄ£ÀÄß ¸À£ï 2023-24 ¸Á°£À ¯ÉÆPÉÆ¥ÀAiÉÆV E¯ÁSÉ(«zÀÄåvï/¹«í¯ï)/zÀgÀ¥ÀnÖAiÀÄ zÀgÀUÀ¼À£ÀÄß ¥ÀjUÀt¹ vÀAiÀiÁj¸À¯ÁVzÉ.

QjAiÀÄ C©üAiÀÄAvÀgÀgÀÄ ªÀÄÄSÁå¢üPÁjUÀ¼ÀÄ

¥ÀlÖt ¥ÀAZÁAiÀÄvÀ, ¯ÉÆÃPÁ¥ÀÆgÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ,¯ÉÆÃPÁ¥ÀÆgÀ

TOWN PANCHAYAT,LOKAPUR

¯ÉÆÃPÁ¥ÀÆgÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ PÀZÉÃjUÉ EAf¤AiÀÄjAUï ±ÁSÉAiÀÄ PÉÆoÀr ¤ªÀiÁðt ºÀAvÀ-2 gÀ PÁªÀÄUÁjAiÀÄ£ÀÄß PÉÊUÉƼÀÄîªÀÅzÀÄ.

(PARA 133(i) OF K.P.W.D.)

i) Certified that Prashant A Patil Junior Engineer Town Panchayat Lokapur have personally visited the work spot, and prepared the estimate using sanctioned schedule of rates and providing most economical and safe way of executing the work.

ii) Certified that the provisions made in this estimate are not provided in any of the sanctioned estimate.

Town Panchayat Lokapur Town Panchayat Lokapur

TOWN PANCHAYAT,LOKAPUR

CHECK LIST ACCOMPANYING THE ESTIMATE

1) Face Sheet duly filled up with all relevant particulars and signed by all the concerned officers/officials is enclosed. : Yes

2) Whether administrative approval is accorded or not. If accorded the letter No. & date to be furnished. : Yes

3) General Report with all details highlighting the importance of work is enclosed or not. : Yes

4) Whether estimate is prepared as per current S.R. or not. : Yes

5) Abstract Sheet with details of specifications as per C.S.R. with all leads and lifts for all the items, is enclosed or not. : --

6) Detailed Measurement Sheet with specification as per C.S.R. with all leads and lifts, is enclosed or not. : Yes

7) Whether the approved quarry maps for different materials of construction are enclosed or not. : --

8) Rate Analysis with detailed specifications as per C.S.R. with necessary leads and lifts by adding difference in issue rate of materials duly signed for each item is enclosed or not. : --

9) If market rate is considered in the rate analysis the procedure followed as per rules is to be furnished in the form of certificate for such items with details. : --

10) Co-efficient considered in the estimate are one and the same with reference to schedule of rates approved. : No

11) Lead Statement based on approved quarry map is enclosed or not. : --

12) Measurements considered in the estimate are as per type plans approved by the competent authority is enclosed or not. : Yes

13) Whether trial pit results approved by competent authority are enclosed or not. : --

14) Approved plan, elevation and foundation details are enclosed or not : --

15) Whether provision is made in the estimate for draining away water from the building/road/bridges etc. : --

16) Whether provision is made for electricity, water supply, drainage and other items. : --

17) Whether required certificates as per conduct rule is enclosed or not. : Yes

18) Whether the work is included in programme of works or not. :

19) Whether the estimate has been neatly typed and submitted in duplicate or not. : Yes

TPC Lokapur TPC Lokapur

TOWN PANCHAYAT LOKAPUR

NAME OF WORK : ¯ÉÆÃPÁ¥ÀÆgÀ ¥ÀlÖt ¥ÀAZÁAiÀÄvÀ PÀZÉÃjUÉ EAf¤AiÀÄjAUï ±ÁSÉAiÀÄ PÉÆoÀr ¤ªÀiÁðt ºÀAvÀ-2 gÀ PÁªÀÄUÁjAiÀÄ£ÀÄß PÉÊUÉƼÀÄîªÀÅzÀÄ.

ESTIMATE COST : 6.0 LAKHS

SL No Description S.R Rate Analysisi 2023-24 No L B D Qty Unit Rate Amount

1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (PWD Common Schedule of Rate 2023-24 Page No. 15 Item No 2.16 Vol -1)

Basic Rate 6243

Area weightage @ 3% 187.29 `

Final Rate 6430.29

2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWD SR 2023-24 / VOLUME 2 / I NO 6.1 / P. NO 13)

Basic Rate 8220.00

Area weightage @ 3% 246.60

Final Rate 8466.60 4706798

3 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD CSR 2023-24 Volume -2 Pg.No 42 I.No 8.8 )

Basic Rate 371.00

Area weightage @ 3% 11.13

Final Rate 382.13 4706798

OUT SIDE WALLS 0 #REF!

Ceilling 1 6.23 3.90 24.30

4 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (PWD CSR 2023-24 Volume -2 Pg.No 131 I.No 14.3.1 )

Basic Rate 5977.00

Area weightage @ 3% 179.31

Final Rate 6156.31 4706798

5 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD CSR 2023-24 Volume -2 Pg.No 82 I.No 11.16.1 )

Basic Rate 136.00

Area weightage @ 3% 4.08 3.205

Final Rate 140.08 4706798

ventilation 3 0.45 0.300 0.41 0 #REF!

6 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.(PWD SR 2023-24 / VOLUME 2 / I NO 9.10 / P. NO 60)

Basic Rate 1106.00

Area weightage @ 3% 33.18

Final Rate 1139.18 4706798

7 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(PWD SR 2023-24 / VOLUME 2 / I NO 8.26 / P. NO 45)

Basic Rate 80.00

Area weightage @ 3% 2.40

Final Rate 82.40

OUT SIDE WALLS 0 #REF!

Ceilling 1 6.23 3.90 24.30

8 PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size – 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD CSR 2023-24 Volume -2 Pg.No 108 I.No 12.84 )

Basic Rate 5023.00

Area weightage @ 3% 150.69

Final Rate 5173.69 4706798

Windows 5 1.50 1.200 9.00 0 #REF!

9 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (PWD CSR 2023-24 Volume -2 Pg.No 108 I.No12.12 )

Basic Rate 124202.00

Area weightage @ 3% 3726.06

Final Rate 127928.06 4706798

10 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (PWD CSR 2023-24 Volume -2 Pg.No 100 I.No12.15 )

Basic Rate 6897.00

Area weightage @ 3% 206.91

Final Rate 7103.91 4706798

11 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.do- with both side prelam (PWD CSR 2023-24 Volume -2 Pg.No 104 I.No12.55.1 )

Basic Rate 2366.00

Area weightage @ 3% 70.98

Final Rate 2436.98 4706798

12 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent (PWD CSR 2023-24 Volume -2 Pg.No 63 I.No9.24 )

Basic Rate 2852.00

Area weightage @ 3% 85.56

Final Rate 2937.56 4706798

office room 1 6.23 3.60 22.43 0 #REF!

13 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. (PWD CSR 2023-24 Volume -2 Pg.No 64 I.No9.34 )

Basic Rate 1545.00

Area weightage @ 3% 46.35

Final Rate 1591.35 4706798

Total Rs. 507906.73

Add GST 18% 91423.21

Total Rs. 599329.94

Miscelellaneous & Rounding Off 670.06 229.76

Total Amount Rs. 600000.00

1 The work spot has been inspected by me and founf necessary

2 The provisions made in estimate are necessary and economical

3 The estimate is based on PWD SR of 2023-24

Junior Engineer Chief officer

TP Lokapur TP Lokapur

SL No Description Unit Qty Rate Amount

1 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates (PWD Common Schedule of Rate 2023-24 Page No. 15 Item No 2.16 Vol -1) Cum 4.11 6430.29 26409.97

2 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.(PWD SR 2023-24 / VOLUME 2 / I NO 6.1 / P. NO 13) Cum 17.15 8466.60 145201.77

3 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.(PWD CSR 2023-24 Volume -2 Pg.No 42 I.No 8.8 ) Cum 223.84 382.13 85536.74

4 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid (PWD CSR 2023-24 Volume -2 Pg.No 131 I.No 14.3.1 ) Each 1.00 6156.31 6156.31

5 Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD CSR 2023-24 Volume -2 Pg.No 82 I.No 11.16.1 ) kg 14.18 140.08 1985.63

6 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete.(PWD SR 2023-24 / VOLUME 2 / I NO 9.10 / P. NO 60) sqm 16.96 1139.18 19317.08

7 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge(PWD SR 2023-24 / VOLUME 2 / I NO 8.26 / P. NO 45) sqm 223.84 82.40 18444.58

8 PProviding & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets -grey color having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with Crescent Locks. Wall thickness of frame & sash shall be of 2 mm.Maximum possible size – 1219mm x 1219mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD CSR 2023-24 Volume -2 Pg.No 108 I.No 12.84 ) sqm 9.00 5173.69 46563.21

9 Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ), but including cost of materials, labour, usage charges complete as per specifications. (PWD CSR 2023-24 Volume -2 Pg.No 108 I.No12.12 ) cum 0.17 127928.06 21108.13

10 Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (PWD CSR 2023-24 Volume -2 Pg.No 100 I.No12.15 ) sqm 5.04 7103.91 35803.71

11 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.do- with both side prelam (PWD CSR 2023-24 Volume -2 Pg.No 104 I.No12.55.1 ) sqm 1.89 2436.98 4605.89

12 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent (PWD CSR 2023-24 Volume -2 Pg.No 63 I.No9.24 ) sqm 27.68 2937.56 81305.79

13 Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. (PWD CSR 2023-24 Volume -2 Pg.No 64 I.No9.34 ) sqm 9.72 1591.35 15467.92