EEE-III/RZ/NZ/TC/2021-22/12.5

Amount

Earthing with GI Earth pipe 4.5longx40mm dia i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc (but without charcoal or coke and salt) complete as required.

Providing and fixing 25mm x 5mm GI strip on surface or in recess for connections etc as req.

Laying of one number XLPE insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm

Laying of one number XLPE insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

Supply of XLPE insulated and PVC Sheathed Al conductor armoured cables conforming to IS-7098 (Part-I) /1976 as required. 2x25sqmm

SITC of 150W LED flood Light fitted with lens Fixture made of pressure die cast aluminium housing & toughned glass cover i/c mounting bracket complete with the following specification as reqd. (a) total system wattage = 150 watt + 5 % (c) Luminaire Efficacy>= 100 Lm/w (c) Power factor>=0.95 (d) Protection IP66

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting andcutting, jointing etc..direct in ground (75 cm below ground level)including excavation and refilling the trench but excluding sandcushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

S/F 40mm dia GI pipe medium class along with the pole/wall for cable protection i/c painting etc as required.

Fabrication,Supplying,Installation,testing,Commissioning of 12 mts.high mast System with its accessories ,Mast shaft shall be in one section , hot dip galvanized (Single dip ) inside and out sides and suitable for wind velocity as per IS 875 part3 .There shall be in longitudinal seam weld per section and No circumfrential weld. It should also included accessories For High Mast head frame ,2 point suspension system with steel wire rope 5mm dia. (7/19construction) single drum winch ,galvanized lantern carriage arrangement suitable for 4/6 Nos. flood lights luminaries symmitrically And its control gears boxes and lighting finial ,the mast shall have integral type manual raising and lowering operation with foundation bolts and Anchor plate and control panel housing suitable RCC(12:4) shallow foundation of size 1m(L) X 2m deep i/c excavation of earth providing cutting bending and placing in position reinforcement of cold twisted bar of 12 mm -2100 long(approx) -16 nos and reinforcement of cold twisted bar of 8 mm-3700 mm (approx)- 13 nos (with 150 mm spacing) as required with Positioning of foundation bolts and providing DWC HDPE pipe for cable entry & exit as required for the high mast Considering the safe soil bearing capacity at site as 10T/sqm at 2mts. Depth with all material i/c 4 Nos S.P MCB, 63Amp.DPIsolator etc as reqd.

Supply and fabrication of pole protection system made up of 8SWG steel wire mesh of size25mmx75mm rectangular with 50mmx50mmx6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc as reqd.