8178 E8 SPECIAL REPAIRS TO DAMAGED COLUMNS BEAMS CRUMPLE JOINTS STAIRCASE AND EXTERNAL INTERNAL PLASTER OF TULA AND DHANUSH BUILDINGS TO ARREST LEAKAGE SEEPAGE AT NAVY NAGAR COLABA MUMBAI

Amount

Taking down cement plaster of any description in any position including racking out joints making key scrubbing down with water etc complete all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for Rendering 5 mm thick in CM (1:3) on ceilling complete all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with liquid water proofing compound @ 200 ml per bag of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement all as specified including scaffolding, Safety net etc all complete as directed by Engr-in-Charge. Note :- WPC shall be deemed to be included in rates.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Removal of existing water proofing treatment of the roof, cleaning with wire brushes etc including demolition of PCC padding of any description and in any position. Note :- Work to be carried out above 14th floor.

Material and labour for Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) mixed with Shali Plast LW+ of STP/Pidilite URP of Dr. Fixit or Equivalent and appoved as per manufactures instruction. Before laying concrete surface shall be cleaned and a bond coat of slurry with Shali Crete URP (of STP) or quivalent with cement to be applied. Alll cracks in slab to be openend in 'V' groove and filled with Shali Fix RMC a Polymer Morter of STP/ equivalent complete all as specified and as directed. Note :- Work to be carried out above 14th floor.

Material and labour for 10mm thick rendering in CM 1:4 with the addition of Shaliplast LW+ @ 200ml per bag of cement on fair faces of brick or concrete surfaces all as directed by Engr-In-Charge. Note :- Work to be carried out above 14th floor.

Material and labour for protecting the roof including parapet wall with water proofing coating ,complete as specified below: (a) Clean the surface and apply one coat of primer (STP Shali Urethane BTD diluted in water in 1:1 ratio and applied @ 400 gm/sqm OR Dr, Fixit primeseal diluted in water in 2:1 ratio and applied @ 7-8 sqm/ltr) and allows to dry for 6 to 8 hrs. (b) Apply first coat of water proofing coating over primer surface (Shali Urethene BTD with non butuminous bleding of STP Ltd. @ 1 Sqm/Ltr without dilution OR Dr. Fixit New Coat without any dilution @ 2 Sqm /Ltr) (c) Lay Non woven fiber glass mesh (Reinforcement of Shali Geo Text 40/50 gsm of size 2.5mm x 2.5mm) or equivalent with overlap of 50 mm on both direction while the first coat is still wet. (d) Apply second coat of water proofing coating as per manufactures instruction after 6-8 hrs of drying of first coat. (e) Apply third coat of water proofing coating (as per manucturer instruction) after 6-8 hrs of drying of second coat The total thickness of 1 to 1.2mm must be achieved after 7 days of air cure. Note : 1) The colour of each coat shall be as directed by GE. 2) The work shall be carried out by aithorised applicator only 3) Water proofing to rain water spouts to be done as per manufacturer instruction

Material and labour for Sand Face polymer modified Plaster in patches (25 mm thick) in C.M. ratio 1:4 in two coats, backing coat 15 mm thick over 10 mm thick finishing coat plaster including Drip mould/ Bands / Pattas etc. (parapet wall) complete as per the instructions and as per our standard technical specification manual or as instructed by the Engineer. Note :- Work to be carried out above 14th floor.

Chipping ,removing carefully concrete work by low impact hammer ,breaker without damaging the structure & cleaning and disposal of debris out side the premises etc. (columns, Beams, chajjas, slabs & RCC OHT) complete as directed by Engr-in-Charge. Hard concrete shopuld not be removed by force.

Material and labour for clean existing reinforcement with wire/rotary wire brush, making the surfaces free from loose material, dirt etc. Complete and applying two coats of alkaline rust converting primer FEOVERTASTM-B-117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hours between the coats and applying protective coating IPNET-RB complete all as specified and directed. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite) Note :- Measurement on the basis of area of concrete exposed.

Material and labour for carry out application of ‘Bi-polar migratory corrosion inhibitor' EPCO-KP-100/protectsil CIT/ferogard 903 on concrete surface .(This inhibitor shall have migratory kind of property which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It should have property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete complete as directed by Engr-in-Charge. Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite

Material and labour for replacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed.

Material and labour for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete all complete as directed by Engr-in-Charge.

Material and labour for building up the profile of structrual members by using latex B2 modified air cured mortar system (polymer modified mortar) (1:5:15=1 monobond-5 Cement-15 Sand) -in damaged areas in 30mm thickness including leveling profiling etc complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over one coat of wall primer paint with applying birla white wall putty for making smooth & level surface complete all as specified & directed by Engr-in-Charge.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling surface complete all as specified & directed by Engr-in-Charge

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for complete removal of existing treatment from wall surfaces by scrapping, washing & applying two coat of oil bound distemper of approved make on wall over a coat of priming paint applying with a coat of wall care putty on plaster surface and filling the surface inperfections such as holed, dirt fine cracks all complete as specified & directed by Engr-in-Charge.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for preparation of old plastered surfaces and applying two coats of white wash on ceiling surface complete all as specified & directed by Engr-in-Charge

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for preparing newly plastered or unplastered surfaces of wall & Chajja, terrace & Parapet wall & applying two coats of chemical water proofing treatment (601 raincoat of Pidilite or equivalent) over one coat of primer of same manufactures incl necessary scaffolding, Safety net etc such as Flexcoat, Beckcoat Exshield etc or equivalent including filling of cracks in walls/concrete with "Crack- X" of Pidilite or equivalent complete as per manufactures Instructions, incl necessary scaffolding complete all as as directed by Engr-in-Charge.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for preparation of old decorated surfaces of wall & Chajja, terrace & Parapet wall & applying one coats of chemical water proofing treatment (601 raincoat of Pidilite or equivalent) incl necessary scaffolding, Safety net etc such as Flexcoat, Beckcoat Exshield etc or equivalent including filling of cracks in walls/concrete with "Crack- X" of Pidilite or equivalent complete as per manufactures Instructions, incl necessary scaffolding complete all as as directed by Engr-in-Charge.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

All as per item above but on soffit / ceiling of roof & chajjas.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Dismantling of MS grill of any description and position etc.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for fabrication of framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks, man hole chambers frames and similar work conform to Fe 290 Gde-E-165 & fixed in position as directed etc complete.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix PVC covers to MS railings of stair case hand rail all as specified and directed by Engr-in-Charge.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Writing letter or figures as per existing name n exc 30 cm high (Block,Roman, Italic or Indian) letters.

Material and labour anodised aluminium sheeting 22 gauge thick fixed in repairs as in crumple section.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Demolition of cement concrete (unreinforced) of any decription and in any position (toilet, common area & stair) not otherwise specifically provided.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Roughening surfaces of old concete floor/ wall by picking, sweeping clean & washing down with water to remove dust etc, treating cement concrete or concrete surfaces with three dressing of sodium silicate & brushing with neat cement slurry with 3.00 kg of cement per sqm and applying cement plaster 10 mm thick in CM 1:3 with WPC & applying two coats of liquid membrance over a coat of primer of Make :STP/Dr FIX IT or equivlaent evenly.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for Plain cement concrete 1:7:12 type F2 (using 40mm graded stone aggregate) as in sunken floor, complete all as specified and as directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for CI Nahani trap dia of outlet 100mm fixed in repairs including jointing to waste pipe in runlead and fixed in cement concrete type B-1, 1:2:4 all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix PTMT grating doom over Nahani trap and floor trap of 100mm Dia

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour coloured glazed ceramic tiles 300x200x7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment including Rendering 10mm thick in CM 1:4 backing coat to tiles complete (as in WC, Bath, Kitchen & Lift side walls) all as specified.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Taking up or down GI tubing and connections 15 mm bore including cleaning for refixing or removal to store complete all as specified.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Refixing old GI tubing and connection15 mm bore in new or old position in ( Walls, ceiling, floors etc) with old accesories complete all as specified.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix GI Tubing 15 mm bore medium grade with all fitting and fixed comlete to wall and ceiling or laid in floors complete all as specified.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix Bib tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix Stop valves 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix in repairs for vitreous china squatting pan Orissa pattern of size 580 x 440 mm white with back inlet and integral footrest and anti syphonnage pipe including 'P' or 'S' trap and provn of lime concrete complete all as specified supplied and fixed in repairs.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix PVC connection 15mm size with PTMT nuts of length 450mm

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix in repair PVC valveless, syphonic action type, flushing cristern, 10 ltr capacity low level, white, with inlet, ball valve, float and handle including brackets

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix Flush pipe of polyethylene of low or high density for low level cistern.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour machine cut Kota stone ( greenish colour, mirror polished) slab flooring 18 to 20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing, over & incl 20mm thick screed bed in CM 1:6 complete all as specified.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Ditto all as per item No above but as in skirting over & incl 10mm thick rendering in CM 1:3

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour machine cut Kota stone ( greenish colour, pre polished) slab in one piece as in cill /staircase treads flooring 18 to 20 mm thick over 15mm thick cement screed bed laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and polishing complete all as specified.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Ditto all as per item above but as in riser(should be one piece) over & incl 10mm thick rendering in CM 1:3

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Rounding to edges of stone slabs one edge,such as in steps,cooking plateform,and other similar situations.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for extra two Nos grooves 2x2mm over stair case treads all as specified and directed by Engr-in-Charge.

Material and labour for granite (of any type) 20 mm thick machine cut, in skirting/dado laid over 20mm thick cement screed in CM 1:4 and jointed with bgrey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Material and labour for polishing of old / existing kota stone flooring as per specified and directed. (a) Height upto and including 4th floor.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix 4mm thick figured glass, pin head type and glazing with oil putty in squares/wooden beading n exc 0.5 sqm in each pane.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix CI soil/waste/vent pipe in any length with ears 100 mm bore (centrifugally cast) in any length with cement joints fixed to walls with clamps complete all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix CI bends fitted with oval access door (any radius) for soil/waste pipes 100 mm bore diminishing pieces or tapers on walls complete all as specified.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix CI branch pieces single 'Y'.'T' (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches for 100mm bore pipe with ovel access door all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix CI soil/waste/vent pipe in any length with ears 75mm bore (centrifugally cast) in any length with cement joints fixed to walls with clamps with clamps complete all as specified directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

All as per item No. 62 above but except pipe.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix CI bends fitted with oval access door (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix CI branch piececs single 'Y'.'T' (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 75mm bore pipe fitted with oval access door all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Taking down PVC rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed.

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor incl lift room

Supply and fix PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to wall

(a) Height upto and including 4th floor.

(b) 5th floor to upto and including 8th floor.

(c) 9th floor to upto and including 12th floor.

(d) 13th floor to up to and including 14th floor.

Supply and fix PVC (SWR)bends (any radius) for rain water pipes 160 mm bore diminishing pieces or tapers on walls complete all as specified.

Demolition of brick or strone / boulder work built in cement mortar including all quoins, arches, pillars etc .

Material and labour brick work with subclass B brick straight or curved on plan exc. 6m mean radius , built in cement mortar 1:4 all as specified .

Material and labour PCC Type B1 1:2:4(20mm graded agg) as in coping and benching to manholes including weathering, slightly rounded or chamfered all as specified .

Material and labour rendering 15mm thick in CM (1:3) with liquid water proofing compound , finishing surface even and smooth without using extra cement. Note: - Liquid water proofing compound will be deemed to be included in unit rate quoted

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Supply and fix framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165

Supply and fix for MS Plates chequred (Gde E-250, quality-A) for manhole cover fixed with brackets/handle etc completed all as specified and directed.

Material and labour for demolition of cement conrete (unreinforced) in ground floor and paving n.exc 15 cm thickness.

Material and labour for screed bedding 20mm thick in CM 1:6 below chequred tiles finished even and smooth without using extra cement.

Material and labour for precast pre polished coloured chequred cement concrete tiles 30cm x 30cm x 30mm thick set, jointed in neat cement slurry and pointed with grey cement & mixed with pigment in path all as specified.

Material and labour for PCC type C2, 1:3:6 using (40 mm graded agg) 100mm thick in sub floors, sub-base, floors and paving, plinth protection etc complete all as specified.

Material and labour for 25 mm thick sand filling under interlocking paver blocks watering and compact complete all as specified & directed .

Material and labour for machine pressed precast cocrete interlocking paver blocks 60 mm thick with grey cement and pigment of glossy finish of approved shape & size complete all as specified & directed .

Removing demolished material exc 5 Km but n.exc 15 Km and depositing where directed

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each .

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame at site as per specification & direction.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & direction.

Supply and fix 100 mm extruded aluminium handles, fabricated type anodised

Supply and fix 100mm aluminium anodised barrel tower bolts of extruded section

Supply and fix 75mm stailess steel medium weight butt hinges all as specified and directed.

Material and labour machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium slding window 18 to 20 mm thick over 20 mm thick screed bed in cement mortar 1:3 complete all as specified.

Material and labour machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over 15 mm thick rendering in CM 1:3 complete all as specified and directed.

Supply and fix anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note:- Minimum 25 micron anodisation for all aluminium sections)

Material and labour aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aparture 50mm) all complete.

Supply and fix 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

Supply and fix factory made shutter 30 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing glass/gauge etc of members of shutters as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed

Supply and fix 3mm thick plain sheet glass ordinary quality and glazing fitted in wooden window not exceeding 0.5 sqm in each pane incl wooden beading for securing glass. (Note:- For item No 1 to 95 Work to be carried out at G+14 bldg including top roof and lift machine room parapet walls with scaffolding & safety measures in repairs and in patches).

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc., removing materials for taking credit (credit for above items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for Point wiring complete with proper colour coding using, 1100 volts grade, 1.5 Sqmm, PVC insulated FRLS, unsheathed wire with multi stranded copper conductor conforming to IS-694, part-II, ISI marked and including PVC casing and caping not less than 25 mm thick, ISI mark with all accessories on wall/celling/floor/roof etc,suitable size of PVC modular board ISI marked for fixing of modular switches and sockets complete ISI marked including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for the following :- Make of cable: Finolex/L&T/Havells/ Plaza/ Anchor.Make for casing caping: Poly plast/pressfit /Presto-plast/ Precision.

One light/Exhaust/Ceiling fan point controlled by two way switches.

One light/Exhaust/Ceiling fan point controlled by one switch.

One 3 pin socket outlet, 5 Amps on the same board with other switches.

One 3 pin socket outlet, 5 Amps, independent.

One bell point controlled by one push button .

All as per Item above but with 2.5 Sqmm, including 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for 15 Amp power point.

Supply and fix in replacement of modular switch piano, 1 module, single pole two way 6Amp. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement of modular switch piano, 1 module, single pole one way 6Amp. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement of modular socket 3 pin universal, 2 module, 6A. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement of modular socket 6/16A, 3 pin multistandard, 2 module. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement of modular switch piano, 1 module, single pole one way 16Amp. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement of modular stepped type fan regulator, 2 module, single pole one way. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement with modular bell push switch with indicator, 1 module. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement of modular white cover plate with frame, 8 module. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement of modular white cover plate with frame, 4 module. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement of modular white cover plate with frame, 3 module. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement of modular white cover plate with frame, 1/2 module. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix modular surface mounting PVC box 1/2 module. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix modular surface mounting PVC box 3 module. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix modular surface mounting PVC box 4module. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix modular surface mounting PVC box 8 module. Make- Legrand (Britzy)/Anchor(Roma)/ Crabtree(Athena)

Supply and fix in replacement of ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x50mm

Supply and fix bell, ding dong AC 230 Volts, single pole.Make : Leader/Cona/Anchor.

Supply and fix lamp holder, Angle/Batten, PVC/Polycarbonate body with 7W LED Lamp.Make of holder : Anchor/Crabtree/Havells. & LED Make - Phillips/Havells/Wipro.

Taking down unserviceable FTL and supply and fix Slim LED intigrated batten of 20Watt 4ft coolday light with powder coated CRCA decorative patti prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings including new ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body of size 60x20mm complete. Make of Light Fitting : C&S Cat Part No LTTB4F20WLED/W or BN 021C LED 20S PSU CW GR S2 of Philips or BCLSB20 WH of Bajaj

All as per Item No 117 above but Slim LED integrated batten of 10 Watt 2ft complete. Make of Light Fitting : C&S Cat Part No LTTB2F10WLED/W or BN021 LED10S 6500 PSU GRS1 of Philips or BCLSB10WH LED of Bajaj.

Taking down unserviceable FTL/Bulk Head fitting and supply and fix Bulk head fitting IP-43 with die cast aluminium housing, heat resistant glass and galvanised wire guard and pin type holder with 9 Watt LED lamp including replacement of old unserviceable ceiling rose with earth terminal connection, 3 terminal/PVC/ Polycarbonate, isolated body. Make of Bulk head- C&S Cat No-CG80421 or BJDB100BC of Bajaj or equivalent in CG/Surya/ Wipro/Halonix.

Material and labour for sheet metal enclosure for DBs when MCB 'C' characterstic, 10 KA to be used single phase 8 way, double door, 240V having Din rail, Neutral & Earthing bar as per IS-8828 of 1996 DB sheet not less than 1.2mm with powder paint, min ingress protection shall be IP43, label indicators shall be provided over all incoming/outgoing circuit complete all as specified and directed Make - LEGRAND Cat part No: 507621 or its equivalent in Siemens/ Hager/ Schneider.

Supply and fix MCB SPN, 32/40 Amp, 10 KA, 230 Volt. Make- Legrand/ Siemens/ Haggar.

Supply and fix MCB, single pole, upto 16 Amp, 10 KA, 230 Volt. Make- Legrand/ Siemens/ Haggar.

Supply, fabricated and fixing of street light bracket made from 25/32mm bore GI tubing light grade 1/1.50mtr long, bent to required shape and fixed to pole/wall by means of MS flat iron clamp with nuts, bolts & washers as required for fitting to the buildings complete all as specified and directed.

Taking out Old, unserviceable light fitting and Supply and fix LED 45 Watts building street light in Aluminium PDC housing, toughened glass cover in IP66 protection with 3000 (k) including connecting light with three core copper wire from connector or ceiling rose. Make- Bajaj Cat No- BRTFG45WLEDWW or Jaquar Cat No-LSRT01S045XW or C&S Cat- LTESS45W LED or Crompton Cat - LSTS-45-CDL-M.

Supply and lay in repair cable PVC insulated, PVC sheathed, armoured, FRLS, 1100V grade, 2 core 6 sqmm stranded copper conductor electric cable on wall/ roof/ duct complete and connecting from meter to DBs with glands including taking out existing damaged cables and all as directed. Make-Polycab/plaza/ Havells/ Finolax.

Taking down Ceiling fan and Overhauling of ceiling fan any size and Make, dismantling parts, properly cleaning/removing old existing grease oil and applying new oil grease, varnishing of winding, cleaning dust rust including replacing petty items with new as required such as split pins, clamps, Nuts & bolts, bearing, washers both end of down rod, bush, capacitor 2.5 Mfd including cleaning of fan body and its blade by cleaning agent, painting complete ceiling fan, assembling and connecting complete with copper conductor multi stranded 2 core wire of size 14/0.0076, and testing after refixing at site complete all as specified and as directed by Engr-in-Charge.

Taking down Exhaust fan and Overhauling of Exhaust fan any size and Make, dismantling parts, properly cleaning/removing old existing grease, oil and applying new oil grease, cleaning dust, rust and replacing petty items with new as required such as Nuts, Bolts, washers, bushes, ball bearing, cap, fan shaft, rotor, capacitor 2.5/4 Mfd, body cover etc and applying two coats of grey enamelled paint by spray to Exhaust fan body, blades and clamps complete, reassembling, making all electric connection with copper conductor multi stranded 2 core wire of size 14/0.0076 complete and testing after refixing at site.

Taking down deteriorted louvers and supplying and fix new louvers fixed type made out of 1.6mm GI sheet with horizontal ventilation, machine pressed cutting for horizontal ventilation with flat iron base of complete all as specified and directed by Engr-in-Charge

Supply and fix in relplacement with new cable PVC insulated three core over all PVC sheathed 1.5 Sqmm stranded copper conductor cable for connecion from DB to connector junction box for power supply to security light fittings drawn in PVC conduit not less than 20mm including taking out old one all as directed. Make of wire - Polycab/Plaza/Finolex/ Havells/L&T. Note for all items :- The work in certain bldgs is to be carried out in high storeyed buildings. The rates quoted shall be inclusive of necessary scaffolding and safety measures of labours engaged in the work as per latest labour laws & regulations

Darpan Construction

Vara Enterprises

AGRAWAL ASSOCIATES

M/s. MAYUR ENTERPRISES

7hills Construction company

MUKESH CONSTRUCTION CO