Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹33.5 L
EMD Value
₹67,100
Closing Date
29 Jan 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Agriculture Produce Marketing Committee
Secretary APMC
Construction of 15 Nos of permanent shops at Covered Auction platform No 2 MMY Sankeshwar Under 2024-25 Annual Action plan
APMC/2024-25/BD/WORK_INDENT416
APMC/2024-25/BD/WORK_INDENT416
Open
Buildings
Two Tender Document System(Two Cover)
SECRETARY APMC Office SANKESHWAR
All Tenders shall provide the requested information accurately and in sufficient detail in Section 3 Form of Tender and Qualification information.
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. 2019-20 To 2023-24 Achieved in at least Two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 33.54 Lakhs.
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. 2019-20 To 2023-24 Satisfactorily completed (at least 50 % of the contract value), as prime contractor, at least one similar work of value not less than Rs.16.77 Lakhs.
Assessed available tender capacity (AxNx2.5-B)
PWD Contractor license
GST Registration certificate
PAN Card
Deleted
Deleted
Deleted
Deleted
Deleted
₹840
₹67,100
15 Jan 2025
15 Jan 2025
31 Jan 2025
24 Jan 2025
Construction of 15 Nos of permanent shops at Covered Auction platform No 2 MMY Sankeshwar Under 2024-25 Annual Action plan
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings
& bridges and such simillar works in all kinds of soils, as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works
& super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement:6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of ma...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with Acrylic Smooth exterior paint of required shade
: New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pa...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Supplying heavy gauge PVC condui tpipe.......dia.......mm thick confirming toIS2509 with suitable size bends, junction boxes, adhesive pasteetc,and fixing using inverted wood plug sincase of RCC ceili...
Supplying PVC/GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using ...
Supplying and flush mounting of 16 Way powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/...
Supplying and fixing 16 Module superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the ...
Supplying and wiring adopting loop system in existing PVC Conduit
/casing capping casing capping using 2x1.5mm2 (Phase & Neutral)
& 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (c...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core wirein open or concealed system of wiring with specified
Supplying and fixing of 6Amps one way switch on existing
modular switch plate as per IS 3854 and IS 1293.
Supplying and fixing of 6Amps 3Way socket on existing modular
switch plate as per IS 3854 and IS 1293.
Supplying and fixing of 16A One Way Switch on existing modular
switch plate as per IS 3854 and IS 1293.
Supplying and fixing of 6/16A Universal Socket on existing modular switch plate as per IS 3854 and IS 1293.
Supplying and fixing of Stepped Fan Regulator Two Module on
existing modular switch plate as per IS 3854 and IS 1293.
Supplying And fixing/replacing of 6A Batten Holder on existing
Extra for supplying 4mm thick white plastic plate and covering for
junction boxes of size …110…mm conduit using necessary machine
Supplying of 1 x 4 ' feet - PVC Batten with integrated LED tube 20/22Watts with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 2...
Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL /LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, requi...
Supplying wall mounting fan suitable to operate at single-phase
230v AC. supply. 300 mm Sweep
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...
Supplying and fixing of 8 Way SP & N regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity M...
Supplying and fixing 6-32 Amps SP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circu...
Supplying and fixing 6-32 Amps DP miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circ...
Supply and Installation / Fixing / Provision of 300 mm x 300 mm x 214 mm Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust ...
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy
Supplying & fixing of 32 Amps Porcelain fuse channel with cut out
on existing wooden/ panel using necessary nuts, bolts and washers.
95 Sqmm, 3.5 Core, (21 GI Strips - 4 x 0.8 mm) or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and r...
Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...
Laying of 35 to 95 Sqmm LT UG cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers
as directed by the departmental staff.
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, 3.5 x 70/95/120 Sqmm LT UG Cable.
Brass Cable Gland 25mm.
GI Heavy-Duty pipes 40mm dia..
Aluminium End Terminal (Lug) 16 Sqmm.
supplying, fixing , wiring, earth electrode for grounding conduits. I.C, cutouts and other equipment's on the meter board using 40mm dia 2.90 mm thick GI pipe 2.5 mtr long buired in a pit… The pit s...
Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using
Bentonite clay slurry for earthing in 50 Kg Bag. ESCOMs SR 2023- 24 V-6 Part-3 (Material Charge Part - Item no 51.05)
Digging of Pit for providing GI Pipe type Earthing. Ordinary Soil.
Providing GI Pipe Earthing for Lightning Arrester, Transformer Neutral and Transformer Metal parts (Excluding digging of pits).
Supply of 40 x 6 mm GI strip for grounding connections, using necessary fixing materials as required.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Sl no 2 Kw2.docx
Tender Document • 0.07 MB
snk notification.docx
Instructions to Tenderers • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .