CWE/D-17/2023-24

Amount

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 Sqm, n. exc 50mm deep all as specified and directed.

Scarifying or picking gravelled macadam or bituminous macadam surfaces in area not exc 400 Sqm, exc 50mm and n. exc. 100mm deep all as specified and directed.

M&L WBM 15 CM thick (compacted thickness) in two layer of 7.5 cm thick with coarse aggregate with granite stones, trap or basalt of grading 2 (63mm to 40mm size) spread, rolled and consolidated with to 12 tonne power roller to gradient and camber required all as specified and directed.

All as per item No 3 above but except stone Note :- Serviceable stone aggregate obtain from Item No 1 & 2 will be used.

Surface excavation n. exc. 30 cm deep and averaging 15cm deep and getting out in hard/dense soil.

M&L for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), of granite trap or basalt spread, rolled and consolidated to gradient and camber required

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal).

Preparing water bound macadam surfaces new or old by brushing with wire brushes for removing cacked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirts etc.

M&L for applying evenly a priming tack coat with bituminous primer using paving bitumen VG 10 at the rate of 10 Kg per 10 Sqm on old or new WBM surface, complete all as specified and directed.

M&L for premix bituminous macadam laid /rolled and compacted to required gradient and camber (consolidated thickness not exc 75mm thick) binder content of 4% by weight of total mix using paving bitumen using VG 30 complete all as specified and directed.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc

Demolition of cement concrete (unreinforced) of any descriptioin and in any position not other wise specifically provided complete.

S&F for factory made kerb stone of M-25 grade precast cement concrete/stone laid in position to the required line, level and curvature, jointed with cement mortor 1:3 including making the joint with or without grooves including making drainage opening where ever required complete as per direction of Engineer-in-Charge Note (i) Length of finished kerb edging shall be measured for payment (ii) precast CC kerb shall be approved by the Engineer-in-Charge.)

M&L for painting of two coats synthetic enemal paint over kerb stone in white/yellow/black shades including priming coat and cleaning/preparation of the surface laid as per design approved by Engineer-in-Charge

M&L for applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 at the rate of 5.00 Kg per 10 Sqm on old black top surfaces, complete all as specified and directed

M&L bituminous premixed asphaltic dense concrete 30 mm consolidated thickness using paving bitumen VG-30, 5.50% binder content by weight of total mix, spread by means of self propelled mechanical spreader/paver, rolled and compacted to required camber and gradient by using Tendem vibratory steel wheel, Static steel wheel rollers min capacity 12 tonne complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided all as specified and directed

S&F plates Fe-290 (Gde E-165) (plain or chequered) channels, square cut or notched (Ordinary and counter sunk) forming holes, with or without any attachment.

Demolition of stone sett paving of any description or thickness laid bedded and pointed in any mortar

M&L for stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush with head of stone all as specified and directed.

Demolition of cement concrete (reinforced) in gound floors and pavings not exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete.

M&L for cement concrete work in pavement/hard-standing of flexural strength 40 Kg/per square centimetre in field using 425 kg of cement per cubic metre thickness of concrete 25cm or less and dewatering and compacting with using vaccum dewatering machine and using surface vibrator for compaction over sub base, using dowel bars at joints of PCC and directed by Engr-in-Charge

M&L for finishing to the concrete surface by brooming when concrete is green all as specified and directed.

Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A' for thickness of concrete slab in 150mm all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'B'

Removing demolished materials out side of MOD land distance exc 500m all as specified and directed.

S&F solar stud aluminium alloy solar powered by monocrystal star panel (2.4V/1600MA) LED 10mm total 6 piece of 3 in each side view distance 1000mtr 12 hour continious lightning at night and poly carbonated 6 LED FLAT BASE in colour yellow/red including required adhesive for fixing arrangments complete all as specified and directed. Make- TATA Solar/BP or 3M.

S&F in repair for cat eyes ABS body with scratch and aberasion resistant, micro prismatic, polycarbonate and ultrasonically welded lenses, temprature resistance body of size 90X 100X17mm or 116X81X17mm fixed on road with bituminous adhesive as per manufactures instruction having resistance cremer coating and reflactive surface Red/Yellow in colour complete all as specified and directed. Make- 3M/Dark Eye/ Avery dension.

S&F Solar Delineator Red/Yellow in colour of size (Appx 700x50x100mm) made of round body fitted with two nos 100 mm dia highly reflective reflectors made of PMMA and mounted on powder coated mild steel pipe of approved colour of 50mm dia, anti rust steel net etc including fix in below or above GL with PCC block of size 30x30x30cm ) of PCC 1:2:4 type B-1 complete as per Cat Part No DA-952 GP ABS of Make Dark Eye or equivalent complete all as specified and as directed.

M&L for cleaning old dirt, oil/grease spots and foreign materials etc from road surface and applying 2.0mm thick thermo plastic (retro reflective) road marking paint for marking white traffic lines, straight or curved having clear and sharp edgs over road surfaces by using thermo plastic paint applicator machine and necessary T&P including cleaning of roads surfaces, heating the paints within temperature limits specified by the manufacturer marking proper arrangement for traffic during operation etc. complete all as specified and directed . Make Asian/Nerolac/Berger Paints. Note Thermo plastic paint material shall consist homogeniously composed of pigment resins and glass reflecto rizing beads in required proportion as perr MORTH specification and conforming to relavent IS.

PBS Construction Co

R K GOEL ABHEY KUMAR JAIN

imran construction company

M P TYAGI ENGINEERS AND CONTRACTORS

VED PRAKASH ARORA