Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC D 3 7TH BLOCK JAIN GREEN ACRES DHARGA ROAD ZAMIN PALLAVARAM CHENNAI 600 043 | CHENNAI | CHENNAI | TAMIL NADU | 600043 | L1 | Accepted-AOC L1 | |
| 2 | L2₹30.0 L+₹2.3 L (8.48%)Rejected-AOC NO 60 ELDAMS ROAD TEYNAMPET CHENNAI TAMIL NADU 600 018 | CHENNAI | CHENNAI | TAMIL NADU | 600018 | L2 | Rejected-AOC L1 being Accept | |
| 3 | L3₹30.7 L+₹3.1 L (11.2%)Rejected-AOC | L3 | Rejected-AOC L1 being Accept | |
| 4 | L4₹33.5 L+₹5.8 L (21.2%)Rejected-AOC PLOT NO 15 JAYASURIYA STREET GANGAI NAGAR KALLIKUPPAM AMBATTUR CHENNAI 600053 | CHENNAI | CHENNAI | TAMIL NADU | 600053 | L4 | Rejected-AOC L1 being Accept |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NAVY CHENNAI
Commander Works Engineers Navy Military Engineer Services Fort St George Rajaji Salai Chennai600 009
82548 REPAIRS TO PQC SLABS, JOINT FILLING ON DISPERSAL AT MEENAMBAKKAM UNDER AGE(I) NAVY CHENNAI
2023_MES_588703_2
CWE/NAVY/CHE/82548/E8 OF 2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
CHENNAI
As per NIT
8 documents required · 8 mandatory
₹500
AGE(I) NAVY CHENNAI
₹70,000
Yes
22 Jun 2023
13 May 2023
5 Jun 2023
13 May 2023
3 Jun 2023
20 May 2023
13 May 2023 - 16 May 2023
Amount
SCHEDULE 'A' PART-I [ B/R WORKS]
M&L for preparation, repair to broken edges, deep cuts, spoiled joints, pop out broken corners, potholes, cracks in pavement as per site requirement by cutting out concrete with concrete cutting machine, to make a true rectangle/square shape as directed .The damaged edges / deepo cuts/spoiled joints/pop out/potholes/crack have to be saw cut in both the sides using concrete cutting machine to a depth of 50 to 70 mm and width of 300 mm. The damaged concrete in the saw cut edges have to be removed completely to a depth of 50 mm using breakers till sound concrete is reached complete all as per manufacturers instructions & as specified and as directed by Engineer in charge. Note 1:- The work will be carried out by authorised applicator of the manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work. Note 2:- 10 years of warranty and guarnttee for the work shall be provided by both applicator and chemical supplier and necessary certificate for the same shall be submitted.
M&L for applying primer ( Fosroc Nitoprime 25) over the surface and filling the crack with high strength epoxy concrete in prepared surface under above item (Average depth of 50 mm and width of 300 mm) . The epoxy concrete shall be prepared by mixing Exporete EC having Base (B), Hardener (H), Fine filler (FF) and 6-10 mm graded stone aggregate (CA) with the propotion by weight (B:H:FF:CA i.e. 4.537: 2.145: 20.818: 30)complete all as per manufacturer instructions & as specified and as directed by Engineer in charge. Note 1:- The work will be carried out by authorised applicator of the manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work. Note 2:- 10 years of warranty and guarnttee for the work shall be provided by both applicator and chemical supplier and necessary certificate for the same shall be submitted.
Supply and filling the cracks in the panels with low viscous epoxy grout using gravity feeding conbextra EP 10 having base(B): hardener (H) at site in the specified proportion by weight (B:H i.e. 3.353 : 1.148 for 4.5L pack) and the material shall be weighed accurately in the specified proportion as per manufacturers instructions complete all as per manufacturers instructions and directed by Engineer in charge. Note 1:-The rate quote including Cutting and making V grooves in the crack, cleaning thoroughly with coir brushes followed by an air blower (Air compressor to be used) all as per manufacturers instructions. Note 2:- The work will be carried out by authorised applicator of the manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work. Note 3:- 10 years of warranty and guarnttee for the work shall be provided by both applicator and chemical supplier and necessary certificate for the same shall be submitted.
Material and labour for filling the minor cracks with high strength epoxy mortar -Nitomortar S /Nitomortar FC in average 25 mm wide and 5 mm thick over the primed surface complete all as per manufacturers instructions & as specified and as directed by Engineer in charge. Note 1:- The work will be carried out by authorised applicator of the manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work. Note 2:- 10 years of warranty and guarnttee for the work shall be provided by both applicator and chemical supplier and necessary certificate for the same shall be submitted.
Material and labour for raking out or removing the old sealing compound and widening of expansion/ construction joints with proper equipments and cleaning the joints by vacuum suction and removing any dust, unsound or contaminated material, plaster, oil, paint, grease, corrosion depsoits or algae by mechanical means and apply priming & sealing the slot surfaces with PRIMER 20 using clean dry brush and applying of COLPOR 200/200 PF (between 30 minutes and 2 hours after priming) and mixing and laying PU sealant at the designated joints and sealed using COLPOR 200PF over the backer rod (packed tightly) of dia 32 mm on the filler board 25 mm thick (with HYDROCEL XL) in the joint of pavement including apply masking tape on edges of joints to prevent accidental spillage of sealant and removing the masking tape after filling of sealant complete all as per manufacturers instructions & as specified and as directed by Engineer in charge. Note 1:- The work will be carried out by authorised applicator of the manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work. Note 2:-The polyethylene rod (Backer rod) shall be of desired diameter having minimum density of 22Kg/cum and compression strength of 0.40Kg/sqm of white colour. Note 3:- 10 years of warranty and guarnttee for the work shall be provided by both applicator and chemical supplier and necessary certificate for the same shall be submitted.
(a) Expansion joints 25 to 30 mm wide x 10mm deep over polyethylene baker rod
(b) Construction joints 12 to 15mm wide x 13mm deep over polyethylene baker rod
DANUSH INTERIORS AND CONTRACTORS
gandhie constructions
Banyan Engineers and Contractors
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .