Special repair by providing renovation of various Blocks in the Campus of Shri Atal Bihari Vajpayee Government Medical College Village Chhainsa Tehsil Ballabgarh in Faridabad District

Amount

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead [HSR 5.45]

12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) [HSR 11.53]

Applying two coats with cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost an dcarriage of all material, labour charges, scaffolding, sundries etc. complete [HSR 11.58] (Labour Rate)

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand) [HSR 11.6.2]

Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work (HSR 11.71.1](LABOUR RATE)

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) [HSR 11.68.4](LABOUR RATE)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work [HSR 30.27.1](LABOUR RATE)

Applying priming coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/ steel work (HSR 11.68.3) (Labour Rate)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness [HSR 12.160.1]

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. (HSR 12.86]

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm), with necessary accessories and screws etc. complete.[HSR 12.88]

Fixing aluminium round shape handle of outer dia 100mm with screws etc. complete. [HSR 12.108.1](LABOUR RATE)

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. [HSR 12.105]

Laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand). jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 500x500 mm (HSR 10.67.1](LABOUR RATE) (Tiles will be supplied by the Deptt.)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories stainless steel dash fasteners , stainless steel bolts required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). [HSR 13.41]

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. [HSR 13.35]

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level:1:1%:3 (1 Cement: 1% coarse sand (zone-II): 3 graded stone aggregate 20 mm nominal size) [HSR 6.1.1]

Steel reinforcement for R.C.C. work there not included in the complete rate of RCC, including straightening, cutting, bending. placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level. Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these itenms shall be deemed to be included in the rates for reinforcement. (HSR 6.33.6) Thermo-Mechanically Treated bars of grade Fe-500D or more

Laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. [HSR 10.49.1](LABOUR RATE) (Granite will be supplied by the Deptt.)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below [HSR 5.29.1]

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :Of area beyond 3 sq. metres (HSR 5.30.2]

Laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kE/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm [HSR 10.63.2](LABOUR RATE)

Brick work with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) [HSR 7.22.2]

Half brick masonry with common burnt clay non-modular bricks of class designation 7.5 in superstructure above plinth level up to floor IV level. Cement mortar 1:4 (1 cement :4 coarse sand) [HSR 7.28.2]

Providing and fixing aluminium U beading of required size to Pre- laminated/flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge. [HSR 12.43]

Providing & fixing glazing in door, window, ventilator shutters and partitions etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of Gasket / beading shall be paid as per respective item) Float glass panes of 5.5mm thickness (HSR 13.24.1]

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides HSR 12.158.2]

Wall painting with premium acrylic emulsion paint of interior grade, having VoC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats (HSR 11.75.2](LABOUR RATE)

Pointing on stone slab ceiling with cement mortar 1:2 (1 cement: 2 fine sand):Flush/ Ruled pointing [HSR 11.29.1]

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand 4 stone aggregate 10 mm and down gauge), including finishing with cerment mortar 1:3 (1 cement : 3 fine sand) as per standard design : (HSR 9.17.1) In 75 x 75 mm deep chase

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivary, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. [HSR 10.57]

Providing and fixing Ist quality ceramic glazed wall tiles conforming to 15: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.[HSR 10.62]

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge, (HSR 4.12.1) All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up toj Floor IV level: 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) : 8 graded stone aggregate 40 mm nominal size) [HSR 6.1.6]

Brick work with common burnt clay modular bricks of class designation 7.5 in SE foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand). [HSR 7.20.21

Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Ordinary cement without any pigment [HSR 10.30.4]

Providing and fixing double scaffolding system (cup lack type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube Challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc, and maintaining it in a serviceable condition for the required duration as approved and removing it there after The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge The elevational area of the scaffolding shall be measured for payment purpose The payment will be made once irrespective of duration of scaffolding. [HSR 30.93]

Treatment of soil under existing floor using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration [HSR 4.40.3.1]

Providing and Laying 80 mm thick ISl marked Interlocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect. [HSR 17.69.2]

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level:1:2:4 (1 cement : 2 coarse sand (zone-llI): 4 graded stone aggregate 20 mm nominal size) [HSR 6.1.2]

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter [HSR 9.57.2]

Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. 110 mm bend [HSR 9.58.5.2]

Fixing cast iron or stoneware intercepting traps to be supplied by the Engineer-in-charge and embedding the same in cement concrete to the requirements of the Engineer-in-charge in screening chambers including carriage from the stores of the Engineer-in-charge.200 mm internal diameter [HSR 21.47.3]

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work below plinth level and up to Floor IV level:1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40 mm nominal size) [HSR 6.1.8]

Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 :4 (1 cement : 4 coarse sand) 25 mm thick :(HSR 10.37.1)

Providing and laying of conglomerate floor 40mm thick cement concrete topping 1:2:4 [HSR 10.8]

Providing and Fixing Poly Carbonate Sheet 1.25mm thickness on Gates and grills excluding the cost of MS framework but including the cost of nut bolts, Welding rods complete in all respect as per direction of Engineer-in-Charge. [HSR 13.20]

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm : [HSR 9.46.1

Cleaning of Building by deploying labour i.e. cleaning and washing of floors which was locked since last 5 years (N.S.)

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. - 100 mm diameter (HSR 9.62.1)

Fixing in position vitreous chinaware white lavatory suites of approved make ES (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Size 550 mm x 400 mm x 815 mm (HSR 22.221.2](LABOUR RATE)

Providing and fixing 40mm i/d chromium plated trap with chromium plated pipe to wall with walflange completed for use with sinks- With C.P. Brass P" or 'S' Trap (HSR 22.17.2

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm [HSR 22.210.2]

Fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.- 15 mm nominal bore [HSR 22.105.1](LABOUR RATE)

Fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore [HSR 22.104.1](LABOUR RATE)

Fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore [HSR 22.107.1](LABOUR RATE)

Providing and fixing 40mm i/d G.I. we pipe embedded in walls up to floor level including cost 212. union and plumber joint (HSR 22.16]

Providing and fixing 40mm i/d chromium plated trap with chromium plated pipe to wall with walflange completed for use with sinks With Bottle Trap (Indian make) [HSR 22.17.1]

Fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S triangular plate to European type W.C. of quality and make as approved by Engineer- in - charge. [HSR 22.38](LABOUR RATE)

Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour- 15 mm nominal bore with 30cm length (HSR 22.128.1)

Fixing 15 mm C.P. brass Laboratory cock swan neck of best quality (to the approval of Engineer-in-charge) - One way [HSR 22.8.1](LABOUR RATE)

Fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms [HSR 22.126](LABOUR RATE)

Fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms [HSR 22.119.1)(LABOUR RATE)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040 mm bowl depth 178 mm (HSR 22.10.1.4]

Fixing water closet squatting pan (Ineran type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete, including cutting and making| good the walls and floors wherever required: White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests [HSR 22.22.1](LABOUR RATE)

Fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. [HSR 22.15](LABOUR RATE)

Fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps. complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern [HSR 22.25.3](LABOUR RATE)

Fixing white vitreous chinaware flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern [HSR 22.25.1](LABOUR RATE)

Fixing white vitreous chinaware water closet squatting pan (Indian type) :Orissa pattern W.C. pan of size 580x440 mm [HSR 22.28.2](LABOUR RATE)

Providing and fixing Hub less centrifugally cast iron offsets epoxy coated inside & outside as per IS:15905 With 75 mm dia pipe [HSR 22.71.1.2]

Fixing vitreous chinaware dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous chinaware dual purpose WC pan with white solid plastic seat and lid with white vitreous chinaware flushing cistern and C.P. flush bend.[HSR 22.32.1)(LABOUR RATE)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore [HSR 22.103.3]

Providing and fixing rectangular high density polyethylene water storage loft 30 tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately (HSR 22.182)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. [HSR 22.88] (i) 15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

40 mm dia nominal bore

50 mm dia nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : [HSR 22.94] (i) 15 mm Nominal bor

20 mm nominal bor

25 mm nominal bor

40 mm nominal bor

50 mm nominal bor

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): [HSR 22.98] (i) 20 mm Nominal bor

25 mm nominal bor

40 mm nominal bor

50 mm nominal bor

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. [HSR 22.87] (i) 20 mm nominal outer dia pipes

25 mm nominal oter dia pipes

40 mm nominal outer dia pipes

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia up to 300mm [HSR 30.91]

Cleaning of under ground sun, Over Head R.C.C. Tank (independent staging) including disposal of silt and rubbish, all as per direction of Engineer in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water iii) Chlorination of RCC internal surface by liquid chlorine.iv) The treated surface shall be dried using air jetting and allloose particles shall be removal from the surface (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge (HSR 30.92)

M/S NANAK CHAND AND SONS

M/s Daksha Construction