Special repair to EOT cranes at various sheds of 506 ABW Jabalpur under GE (E) Jabalpur

Amount

Basic Rate : Refer Schedule'A' Notes

Complete overhauling/ repairing & servicing/ reconditioning of class-II indoor duty double girder flame proof EOT crane of capacity 5.0 Tonne installed in 506 ABW Jabalpur in manner as specified in sub Para (A) & (D) here- in- after including reallinement of complete crane, guide wheels, girder etc and testing of crane after complete overhauling/ repairing & servicing/ reconditioning of crane for full load capacity for long travell, cross travel and deflection as directed by GE including oilling, greasing of all movable parts such as steel ropes, gear drum, break units bronz wheels etc and checking to all electrical circuts and finger contacts, fixed contacts, arching contacts, auxilary contacts situated in side crane control panel and cleaning of outer surfaces thoroughly including writing letters or figures (Block, Roman, Italic or Indian) with and including thick enamel paint of approved colour/ shed not exc 5cm in height for make, capacity & SM/ MES No. etc of crane complete all as specified and directed:-

(A) Complete overhauling/ repairing & servicing/ reconditioning of LT Driving & Trailing System (a) Dismantling, cleaning & inspection of LT gearbox, replacement of all long travel gearbox, installation of gearbox with filling of gear oil strictly as per the standard practice for gearbox assembly/ Indian Standard. (b) Dismantling, cleaning & inspection of LT driving induction motor, replacement of all damaged component, heat varnishing of complete motor and replacement of all damaged bearings. (c) Dismantling, cleaning & inspection of both long travel braking system, replacement of complete braking system including brake drum and base frame. (d) Cleaning & inspection of LT walkway including mounting tools of LT driving mechanism, replacement of base plate, hand railing, fasteners (If required). (e) Dismantling, cleaning & inspection of all couplings, driving shafts, plummer blocks with sleeve, tools, driving gears & pinions, bearings, fasteners, replacement of all damaged components, alignment and level correction of shaft line, rectification of alignment problems, re-assembly/ re- installation of LT driving mechanism. (f) Dismantling, cleaning & inspection of LT driving wheels, replacement of all wheels of long travel complete with L-frame, shaft, bearings, spacer etc.

(B) Complete overhauling/ repairing & servicing/ reconditioning of Hoisting System (a) Dismantling, cleaning & inspection of hoist gearbox, replacement of all hoist gearbox, installation of gearbox with filling of gear oil strictly as per the standard practice for gearbox assembly / Indian Standard. (b) Dismantling, cleaning & inspection of hoist driving induction motor, replacement of all damaged component, heat varnishing of complete motor and replacement of all damaged bearings. (c) Dismantling, cleaning & inspection of hoist braking system, replacement of complete braking system including brakes drums, mounting etc. (d) Dismantling, cleaning & inspection of sheave pulley with mounting frame, replacement of all damaged components or replacement of complete sheave pulley block whichever will be required. (e) Dismantling, cleaning & inspection of rope drum complete with bearing blocks, wire rope, mounting clamp & fasteners etc, special checking to be perform for its grooves and shaft, rectification of defects of grooves or making of new grooves shall be done as per requirement. Replacement of all damaged components like bearings, bearing blocks, sleeve, couplings, coupling bolts, gears, rope guide. Alignment and level correction/ checking of rope drum. (f) Replacement of wire rope. (g) Dismantling, cleaning & inspection of hook block assembly, replacement of all damaged components like Pulleys, Bearings, Hook, Shaft, Pulley Cover etc. Re-assembling of hook block and re- installation of complete hoist driving system on trolley.

(C) Complete overhauling/ repairing & servicing/ reconditioning of Cross Travel System (a) Dismantling, cleaning & inspection of CT gearbox, replacement of all damaged gearbox, Installation of gearbox with filling of gear oil strictly as per standard practice for gearbox assembly/ Indian Standard. (b) Dismantling, cleaning & inspection of CT driving induction motor, replacement of all damaged component, heat varnishing of complete motor. Replacement of all damaged bearings if required. (c) Replacement of all CT wheel complete with all. (d) Dismantling, cleaning & inspection of CT braking system, replacement of complete braking system including brakes and brake drums, mounting etc. (e) Inspection and rectification of CT trolley complete with correction of dimensional problems and replacement including fabrication & installation of all damaged components like - top frame, base plates, mounting tools of all hoist and CT driving system etc. Re-installation of driving and trailing wheels, complete driving systems, driving shafts etc.

(D) Complete overhauling/ repairing & servicing/ reconditioning of following (a) Checking/ rectification/ realignment of CT Track. (b) Checking / rectification/ realignment of bridge girder and LT wheel base. (c) Dismantling of existing all limit switches of any type like striker type, dead weight type and rotary type and installation of new limit switches. (d) Dismantling, cleaning & inspection of existing electrical control panels, development & design of new electrical dircuit for EOT Crane and making of new electrical control panel for EOT Crane by using of existing workable switchgears and unserviceable/ balance with new one like switchgears/ transformers/ indicating light and fabricated new panel box, bus bar etc. and on completion two sets of drawings of new electrical dircuit design for EOT Crane shall will be submitted to Engineer-in-Charge duly signed by all concerned. (e) Dismantling, cleaning & inspection of all existing power and control cable & replacement of all damaged cables of make as approved by GE. (f) Dismantling of existing DSL system and installation of new DSL system. (g) Load Testing and providing Load Test Certification of all Reconditioned crane from government approved agency.

Notes-2 :- (i) Contractor shall ensure for adherence of timing for his his workers as per direction of Engr-in-Charge being restricted area and contractor shall be fully responsible any security lapse if occured during working hours. (ii) Cost of cable jointing materials such as cable glands & lugs etc as required shall be deemed to be included in quoted rate and nothing extra shall be paid on this account. (iii) All necessary T&P required at site for "complete overhauling/ repairing & servicing/ reconditioning of crane" shall be arranged by contractor at his own cost and quoted rate shall be deemed to be included for all these provisions and nothing extra shall be paid on this account. (iv) All necessary dead load/ weight required at site for "full load capacity test of crane" after complete overhauling/ repairing & servicing/ reconditioning of crane shall be arranged by contractor at his own cost and quoted rate shall be deemed to be included for all these provisions and nothing extra shall be paid on this account. (v) "Full load capacity test of crane" shall be got done through "government approved agency" only and quoted rate shall be deemed to be included for all these provisions and nothing extra shall be paid on this account. (vi) As per liad down policy, full load testing shall be carried out by providing 10% extra load from its capacity.

Complete overhauling/ repairing & servicing/ reconditioning of class-II indoor duty double girder flame proof EOT crane of capacity 2.0 Tonne installed in 506 ABW Jabalpur in manner as specified in sub Para (A) & (D) here- in- after including reallinement of complete crane, guide wheels, girder etc and testing of crane after complete overhauling/ repairing & servicing/ reconditioning of crane for full load capacity for long travell, cross travel and deflection as directed by GE including oilling, greasing of all movable parts such as steel ropes, gear drum, break units bronz wheels etc and checking to all electrical circuts and finger contacts, fixed contacts, arching contacts, auxilary contacts situated in side crane control panel and cleaning of outer surfaces thoroughly including writing letters or figures (Block, Roman, Italic or Indian) with and including thick enamel paint of approved colour/ shed not exc 5cm in height for make, capacity & SM/ MES No. etc of crane complete all as specified and directed:-

(A) Complete overhauling/ repairing & servicing/ reconditioning of LT Driving & Trailing System (a) Dismantling, cleaning & inspection of LT gearbox, replacement of all long travel gearbox, installation of gearbox with filling of gear oil strictly as per the standard practice for gearbox assembly/ Indian Standard. (b) Dismantling, cleaning & inspection of LT driving induction motor, replacement of all damaged component, heat varnishing of complete motor and replacement of all damaged bearings. (c) Dismantling, cleaning & inspection of both long travel braking system, replacement of complete braking system including brake drum and base frame. (d) Cleaning & inspection of LT walkway including mounting tools of LT driving mechanism, replacement of base plate, hand railing, fasteners (If required). (e) Dismantling, cleaning & inspection of all couplings, driving shafts, plummer blocks with sleeve, tools, driving gears & pinions, bearings, fasteners, replacement of all damaged components, alignment and level correction of shaft line, rectification of alignment problems, re-assembly/ re- installation of LT driving mechanism. (f) Dismantling, cleaning & inspection of LT driving wheels, replacement of all wheels of long travel complete with L-frame, shaft, bearings, spacer etc.

(B) Complete overhauling/ repairing & servicing/ reconditioning of Hoisting System (a) Dismantling, cleaning & inspection of hoist gearbox, replacement of all hoist gearbox, installation of gearbox with filling of gear oil strictly as per the standard practice for gearbox assembly / Indian Standard. (b) Dismantling, cleaning & inspection of hoist driving induction motor, replacement of all damaged component, heat varnishing of complete motor and replacement of all damaged bearings. (c) Dismantling, cleaning & inspection of hoist braking system, replacement of complete braking system including brakes drums, mounting etc. (d) Dismantling, cleaning & inspection of sheave pulley with mounting frame, replacement of all damaged components or replacement of complete sheave pulley block whichever will be required. (e) Dismantling, cleaning & inspection of rope drum complete with bearing blocks, wire rope, mounting clamp & fasteners etc, special checking to be perform for its grooves and shaft, rectification of defects of grooves or making of new grooves shall be done as per requirement. Replacement of all damaged components like bearings, bearing blocks, sleeve, couplings, coupling bolts, gears, rope guide. Alignment and level correction/ checking of rope drum. (f) Replacement of wire rope. (g) Dismantling, cleaning & inspection of hook block assembly, replacement of all damaged components like Pulleys, Bearings, Hook, Shaft, Pulley Cover etc. Re-assembling of hook block and re- installation of complete hoist driving system on trolley.

(C) Complete overhauling/ repairing & servicing/ reconditioning of Cross Travel System (a) Dismantling, cleaning & inspection of CT gearbox, replacement of all damaged gearbox, Installation of gearbox with filling of gear oil strictly as per standard practice for gearbox assembly/ Indian Standard. (b) Dismantling, cleaning & inspection of CT driving induction motor, replacement of all damaged component, heat varnishing of complete motor. Replacement of all damaged bearings if required. (c) Replacement of all CT wheel complete with all. (d) Dismantling, cleaning & inspection of CT braking system, replacement of complete braking system including brakes and brake drums, mounting etc. (e) Inspection and rectification of CT trolley complete with correction of dimensional problems and replacement including fabrication & installation of all damaged components like - top frame, base plates, mounting tools of all hoist and CT driving system etc. Re-installation of driving and trailing wheels, complete driving systems, driving shafts etc.

(D) Complete overhauling/ repairing & servicing/ reconditioning of following (a) Checking/ rectification/ realignment of CT Track. (b) Checking / rectification/ realignment of bridge girder and LT wheel base. (c) Dismantling of existing all limit switches of any type like striker type, dead weight type and rotary type and installation of new limit switches. (d) Dismantling, cleaning & inspection of existing electrical control panels, development & design of new electrical dircuit for EOT Crane and making of new electrical control panel for EOT Crane by using of existing workable switchgears and unserviceable/ balance with new one like switchgears/ transformers/ indicating light and fabricated new panel box, bus bar etc. and on completion two sets of drawings of new electrical dircuit design for EOT Crane shall will be submitted to Engineer-in-Charge duly signed by all concerned. (e) Dismantling, cleaning & inspection of all existing power and control cable & replacement of all damaged cables of make as approved by GE. (f) Dismantling of existing DSL system and installation of new DSL system. (g) Load Testing and providing Load Test Certification of all Reconditioned crane from government approved agency.

Notes-2 :- (i) Contractor shall ensure for adherence of timing for his his workers as per direction of Engr-in-Charge being restricted area and contractor shall be fully responsible any security lapse if occured during working hours. (ii) Cost of cable jointing materials such as cable glands & lugs etc as required shall be deemed to be included in quoted rate and nothing extra shall be paid on this account. (iii) All necessary T&P required at site for "complete overhauling/ repairing & servicing/ reconditioning of crane" shall be arranged by contractor at his own cost and quoted rate shall be deemed to be included for all these provisions and nothing extra shall be paid on this account. (iv) All necessary dead load/ weight required at site for "full load capacity test of crane" after complete overhauling/ repairing & servicing/ reconditioning of crane shall be arranged by contractor at his own cost and quoted rate shall be deemed to be included for all these provisions and nothing extra shall be paid on this account. (v) "Full load capacity test of crane" shall be got done through "government approved agency" only and quoted rate shall be deemed to be included for all these provisions and nothing extra shall be paid on this account. (vi) As per liad down policy, full load testing shall be carried out by providing 10% extra load from its capacity.

Supply only for "replacement/ to be fixed under item No. 2.00 here-in-before", all damaged bearings, oil seal, gasket for hoist, LT & CT gearbox, LT &CT wheel, hook block as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne EOT Crane complete all as specified & directed.

Supply only for "replacement/ to be fixed under item No. 3.00 here-in-before", all damaged bearings, oil seal, gasket for hoist, LT & CT gearbox, LT &CT wheel, hook block as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Crane complete all as specified & directed.

Supply only for "replacement/ to be fixed under item No. 2.00 here-in-before", all switchgears, transformers, panel box, wiring cables, bus bar, switches, all other required items for making of new panel of EOT Crane including necessary wiring, power and control cables including cable trolley block etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne EOT Crane complete all as specified & directed. Make of Switchgears :- Siemens or L&T or Schneider as approved by GE.

Supply only for "replacement/ to be fixed under item No. 3.00 here-in-before", all switchgears, transformers, panel box, wiring cables, bus bar, switches, all other required items for making of new panel of EOT Crane including necessary wiring, power and control cables including cable trolley block etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Crane complete all as specified & directed. Make of Switchgears :- Siemens or L&T or Schneider as approved by GE.

Supply only for "replacement/ to be fixed under item No. 2.00 here-in-before", electro hydraulic thruster brake and brake drum for hoist, LT & CT motion as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne EOT Crane complete all as specified & directed.

Supply only for "replacement/ to be fixed under item No. 3.00 here-in-before", electro hydraulic thruster brake and brake drum for hoist, LT & CT motion as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Crane complete all as specified & directed.

Supply only for "replacement/ to be fixed under item No. 2.00 here-in-before", all limit switches of LT, CT & Hoist as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne EOT Crane complete all as specified & directed.

Supply only for "replacement/ to be fixed under item No. 3.00 here-in-before", all limit switches of LT, CT & Hoist as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Crane complete all as specified & directed.

Supply only for "replacement/ to be fixed under item No. 2.00 here-in-before", all damaged gear & pinion for hoist gear box, LT gear box and CT gear box as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne EOT Crane complete all as specified & directed.

Supply only for "replacement/ to be fixed under item No. 3.00 here-in-before", all damaged gear & pinion for hoist gear box, LT gear box and CT gear box as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Crane complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty insulated bus bar System 800Amp, 4 BAR (RYBG) complete with jointer, joint cover, hanger clamp, anchor clamp, MS web bracket, end power feed, indicating lamp, current collector & end cover as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty insulated bus bar System 800Amp, 4 BAR (RYBG) complete with jointer, joint cover, hanger clamp, anchor clamp, MS web bracket, end power feed, indicating lamp, current collector & end cover as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty striker type limit switch complete with heavy duty metal box type construction having heavy duty arm and wheel with MS base plate for mounting etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty striker type limit switch complete with heavy duty metal box type construction having heavy duty arm and wheel with MS base plate for mounting etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty dead weight type limit switch complete with heavy duty metal box type construction having heavy duty arm and dead weight with wire rope and clamp with MS base plate for mounting etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty dead weight type limit switch complete with heavy duty metal box type construction having heavy duty arm and dead weight with wire rope and clamp with MS base plate for mounting etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty rotary type limit switch complete with heavy duty metal box type construction having inbuilt heavy duty cam and rotating shaft, ratio required as per site conditions along with mounting arrangement etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty rotary type limit switch complete with heavy duty metal box type construction having inbuilt heavy duty cam and rotating shaft, ratio required as per site conditions along with mounting arrangement etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty electro hydraulic thruster brake 100-18 as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty electro hydraulic thruster brake 100-18 as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty electro hydraulic thruster brake 150-36 as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty electro hydraulic thruster brake 150-36 as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty electro hydraulic thruster brake 200-36 as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty electro hydraulic thruster brake 200-36 as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty galvanized steel wire rope 10mm, crane duty 6x36 construction for hoist application of make- Usha Martin duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty galvanized steel wire rope 10mm, crane duty 6x36 construction for hoist application of make- Usha Martin duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty galvanized steel wire rope 12mm, crane duty 6x36 construction for hoist application of make- Usha Martin duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty galvanized steel wire rope 12mm, crane duty 6x36 construction for hoist application of make- Usha Martin duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", gear & pinion, shaft, bearings, oil seal, gasket etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for hoist gear box of 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, gear & pinion, shaft, bearings, oil seal, gasket etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for hoist gear box of 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", gear & pinion, shaft, bearings, oil seal, gasket etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for LT & CT gear box of 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, gear & pinion, shaft, bearings, oil seal, gasket etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for LT & CT gear box of 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty full gear coupling GC-01 as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty full gear coupling GC-01 as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty full gear coupling GC-02 as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty full gear coupling GC-02 as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty brake drum coupling 100mm as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty brake drum coupling 100mm as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty brake drum coupling 150mm as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty brake drum coupling 150mm as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", heavy duty brake drum coupling 250mm as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, heavy duty brake drum coupling 250mm as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", plummer block with adaptor sleeve as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, plummer block with adaptor sleeve as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply only for "replacement/ to be fixed under item Nos. 2.00/ 3.00 here-in-before", hook block complete spares as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for hook block of 5.0 Tonne/ 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, hook block complete spares as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for hook block of 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, VFD (variable frequency drive) for all motion along with all switchgears, transformers, panel box, wiring cables, bus bar, switches, all other required items for making of new panel including necessary wiring, power and control cables & cable trolley block etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed. Make of VFD :- Yaskawa or Schneider as approved by GE. Make of Switchgears :- Siemens or L&T or Schneider as approved by GE.

Supply and fixed in replacement, dual speed pendent control station with steel chain as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, oil seal, felt, gasket, fasteners etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, rail clamp, base plate track fasteners etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, fabricated mounting tools for gearbox, motor, brake unit, rope drum etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, festoon system for CT trolley and pendent as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Supply and fixed in replacement, bearing for LT & CT wheel, oil seal, L-frame etc as per existing make/ as per manufacturer's recommendations duly approved by GE suitable for 2.0 Tonne EOT Cranes complete all as specified & directed.

Schedule of credit amount of Rs. 53,995.00 to be deducted during AOC

M/S INDIA ENTERPRISES

Paragon Electrotechnics