GE I R AND D/CHD-100/2022-23

Amount

Repair to Almirah Large steel with shelves : - Denting chipped surfaces and preparing the surfaces/ground Almirah large with putty and applying two coat of Ist quality synthetic enamel paint internally by spray painting OG/Silver colour complete all as specified and directed.

All as per serial item No 1.00 above but externally.

Replacement & fixing handle MS CP of standard size complete all as specified and directed by Engineer-in-Charge.

Replacement & fixing of locking device plate and Rod etc complete as specified and directed.

Replacement and fixing of hinges MS of standard size.

All as per serial item No 1.03 above but locks MS body & brass 4 levers. Make : Godrej /ISI marked.

Replacement of unserviceable shelf of Almirah large with new shelf made out of MS sheet 1mm thick and duly painted with 2 coats of synthetic enamel paint over one coat of red oxide primer and fixing complete all as specified and directed.

Replacement of unserviceable leg complete with new leg made out of MS sheet 1mm thick duly welded and painted with 2 coats of Ist quality synthetic enamel paint over one coat of red oxide primer and fixing complete all as specified and directed.

Replacement and fixing of clamps MS with bolt & nuts for fixing shelf & hings complete all as specified and directed.

Repair to Almirah Medium steel/locker steel with shelves :- Denting chipped surfaces and preparing the surfaces/ground with putty and applying two coat of Ist quality synthetic enamel paint internally by spray painting OG Silver colour colour complete all as specified and directed..

All as per serial item No. 2.00 above but externally.

Replacement & fixing handle MS CP of standard size complete all as specified and directed.

Replacement & fixing of locking device plate and Rod etc complete as specified and directed.

Replacement and fixing of hinges MS of standard size.

Replacement and fixing of locks MS body & brass ISI marked 4 levers. Make : Godrej/ISI marked.

Repair to Chair CBB Steel tubular without arms :- Material and labour for painting with synthetic enamele OG colour paint on steel/iron surfaces of chair after preparation of surfaces with sand paper complete all as specified and directed.

Replacement of seat made out of 1st class hard wood sheesham duly woven with 2mm wide cane plastic white/cream colour half round in Godrej Pattern and frame duly painted with two coats of synthetic enamele black paint over a coat of primer and fixed with bolts, nuts and washers of suitable size complete all as specified and directed.

All as per serial item No 3.01 above but back of chair CBB steel without Arm.

Replacement and fixing of hard rubber / PVC shoes set of 04 Nos to bottom frame of chair with suitable screws complete all as specified and directed.

All as per serial item No 3.03 above but caps set of two Nos. to open ends of MS Tube frame at top of chair.

Replacement of broken unserviceable existing MS flat as per drawing with new MS flat to seat/back of chair complete all as specified and directed.

Repair to working table laminated top of sizes:- Cleaning the surfaces with sand paper and french polishing to all surfaces exposed to directed view complete all as specified and directed.

Fixing of new stiffners made out of hardwood Shesham wood 1st class complete all as shown on drgs complete all as specified and directed.

Replacement of leg and fixing of new leg made out of hardwood Shisham wood 1st class complete all as shown on drgs complete all as specified and directed.

Replacement and fixing of top of prelaminated particle board 18mm thick with pre-laminated block board of 18 mm thick fixed with alround 4mm teakwood beading duly polished complete all as shown on drgs complete all as specified and directed.

Repair to chair adjustable 600x560x840mm cushioned seat and back tublar frame round tube cantilever :- Replacement and fixing of seat or back cushioned as earlier provided on chair complete all as specified and directed

Repair to table of sizes 900 x 600 x 760 mm with/without drawer and table dining 1500 x 900 x 760mm :- Cleaning the surfaces with sand paper and french polishing to all surfaces exposed to directed view complete all as specified and directed.

Replacement of legs and fixing of new leg made out of hardwood sheesham wood 1st class complete all as shown on drgs complete all as specified and directed.

Replacement and fixing of top of prelaminated particle board 18mm thick with pre-laminated block board of 18 mm thick with pre-laminated block board of 18 mm thick including wooden beading around the top for table dining of size 1500 x 900 x 760 mm complete all as shown on drgs complete all as specified and directed.

All as per serial item No 6.02 above but size of table 900 x 600 x 760mm.

Repair to Bed Plytop :- Dismantling carefully unserviceable leg of bed and supply and fixing of best quality hardwood sheesham wood leg including French polishing complete all as specified and as directed.

Dismantling unserviceable long rail and supply and fixing of 2nd class chir wood long rail complete all as specified and as directed.

All as per serial item No 7.01 above but short rail ---ditto--

Dismmantling unserviceable head rest and supply and fixing new head rest made out of 4mm thick ply wood one side teak faced duly polished after replacing the inner frame of head rest using 1st class deoder wood complete all as specified and directed.

All as per serial item No 7.03 above but foot rest ---ditto--

Dismantling and replacing of 12mm thick ply wood commercial superior quality and support of salwood fixed with screws complete all as specified and directed.

Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct version by Engr-in Charge.

Repair to Table officer steel :- Material and labour for spray painting with synthetic enamelled paint OG colour on all steel surfaces of table after preparation of surfaces with sand paper complete all as specified and directed.

Dismantling of old worn out top and fixing of 18mm thick with pre-laminated block board of 18 mm thick prelaminated particle board interior grade as shown on drg imcluding 4 mm thick teak wood edging all-round to the top, including requisite welding work complete all as specified and directed.

Replacement of old lock steel and fixing complete all as specified and directed. Make:-Godrej/equivalent.

Replacement of drawer as per existing size and thickness fixing complete all as specified and directed.

Repair to table office clerk steel & table office Asst and table writing of sizes :- Material and labour for spray painting with synthetic enamelled paint OG colour on all steel surfaces of table after preparation of surfaces with sand paper complete all as specified and directed.

Dismantling of old worn out top and fixing of 18mm thick with pre-laminated block board of 18 mm thick prelaminated particle board interior grade as shown on drg imcluding 4 mm thick teak wood edging all-round to the top, including requisite welding work complete all as specified and directed.

Replacement of old lock steel Harrison and Fixing with same/existing specification complete. Make:- Godrej/ISI marked.

Taking out drawers of table office clerk & table writing replacement of drawer and fixing complete all as specified and directed.

Repair/Recanning & painting of chair verandah/chair folding steel:- All as per serial item no 9.00 above but for chair verandah/chair folding steel and painting with synthetic enameld paint white/green finish complete all as specified and directed.

Material and labour for removing of old woovn out cane plastic of chair varandah scraping smoothing the steel frame and re-painting with two coat of white paint and recaning with white plastic cane 4 mm thick half round make: Ajoy premier all as specified and directed by Engr -in -Charge.Weight of plastic cane should not be less than 450 gms per chair rubber shoes and fixing the same on legs of chair Verandah.

Repair to chair CBA steel tubular with arm :- Replacement of unserviceable seat with a new seat made out of 1st class hard wood sheesham duly woven with 2mm wide half round cane plastic white/cream colour in Godrej pattern and frame painted with 2 coats of synthetic enameled Black Paint and fixed with Bolts Nuts and washers of suitable sizes complete all as specified and directed.

All as per serial item No 11.00 above but for back of chair CBA steel tublar with arm.

Replacement of unserviceable hand rest and fixing new one made out of 1st class hard wood sheesham with suitable size of screws etc duly painted with systhetic enamelled black paint existing colour complete all as specified and directed.

Material and labour for painting with synthetic enamel OG colour paint on steel/iron surfaces of chair after preparation of surfaces with sand paper complete all as specified and directed.

Replacement and fixing of hard rubber / PVC shoes set of 04 Nos to bottom frame of chair with suitable screws complete all as specified and directed.

All as per serial item No 11.04 above but caps set of two Nos. to open ends of MS Tube frame at top of chair.

Replacement of broken unserviceable existing MS flat as per drawing with new MS flat to seat/back of chair complete all as specified and directed.

Repair to chair revolving steel of sizes & chair cushioned with seat and back with arm :- Taking out unserviceable seat of chair revolving up holstering the same with foam seat 50mm thick 0.32 density on 6 mm thick plywood commercial duly covered with tapestry cloth and labour for repair of revolving chair complete all as specified and directed .

All as per serial item No 12.00 above but back of chair revolving foam cushion shall be provided 50mm thick 0.32 density complete all as specified and directed.

Replacement of unserviceable hydraulic system of revolving chair complete all as specified and directed .

Replacement of broken/unserviceable wheel of base of revolving chair complete all as specified and directed .

Replacement of broken/unserviceable base of revolving chaircomplete all as specified and directed .

Replacement of broken/unserviceable push back plate of revolving chair complete all as specified and directed .

Repair to table office officer wooden and executive table of sizes:- Dismantling of old worn out top and supply & fixing of 18mm thick prelaminated particle board interior grade as shown on drawing including edging all round the top and minor repairs to drawers complete all as specified and directed.

Cleaning the surfaces with sand paper and french polish to all exposed surfaces to direct version except top laminated surfaces only, complete all as specified and directed.

Replacement of old lock steel and fixing complete all as specified and directed. Make:-Harrison/Godrej.

Replacement of drawer and fixing as per existing Size, thickness & specification at site complete all as specified and directed.

Repair to table office clerk wooden/table writing & table office Asst of sizes:- Dismantling of old worn out top and fixing of 18mm thick with pre-laminated block board of 18 mm thick prelaminated particle board interior grade as shown on drawing including edging all round the top and minor repairs to drawers complete all as specified and directed.

All as per serial item No 14.00 above but for table office clerk/table office Asstt/table writting all wooden off size/off kind.

Replacement and fixing of unserviceable leg/stiffener of 1st class hard wood sheesham complete all as specified and directed.

Replacement of old lock steel Harrison and fixing complete all as specified and directed. Make:-Harrison/Godrej.

Replacement of drawer and fixing as per existing Size, thickness & specification at site complete all as specified and directed.

Repair to Chair CBA wooden/Chair Dining/Chair Easy/Chair writing/Chair office with arm wooden:- Dismantling carefully unserviceable leg and one stiffeners and supply and fixing new leg and stiffener of hard wood/sheesham complete all as specified and directed.

All as per serial item No 15.00 above but for rails of chair CBA wooden/chair dining /Chair wiriting & chair office with arm.

Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct version.

Recanning after removing old unsv cane of seat of chairs with cane plastic 2 mm wide half round white colour of approved quality in Godrej pattern complete all as specified and directed.

Chair Easy :- Dismantling carefully unserviceable leg and one stiffeners and supply and fixing new leg and stiffener of hard wood/sheesham complete all as specified and directed.

All as per serial item No 16.00 above but for rails of chair easy

Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct version.

Replacement and fixing of side frame of 1st class quality hard wood sheesham complete all as specified and directed.

Recanning after removing old unsv cane of back of chairs with cane plastic 2 mm wide half round white colour of approved quality in Godrej pattern complete all as specified and directed.

Repair to chair visitors/chair executive/ chair cushioned steel with arm/without arm of sizes:- Taking out unserviceable seat & back of chair revolving up holstering the same with foam seat 75mm thick 0.32 density on 6 mm thick plywood commercial duly covered with tapestry cloth and labour for repair of revolving chair complete all as specified and directed .

Taking out u/s foam cushion from arms of seat and S&F new foam cushion 25mm thick 0.32 density covered with tapestry cloth complete all as specified and directed.

Cleaning the surfaces with sand paper and painting with black paint to all steel portion complete all as specified and directed.

Repair to chair wooden bottom without arm:- Dismantling carefully unserviceable leg and one stiffeners and supply and fixing new leg and stiffener of hard wood/sheesham complete all as specified and directed.

All as per serial item No 18.00 above but for rails of chair wooden bootom without arms.

Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct version.

Repair/ Replacement of cushion for sofa set Single seater, two seater , three seater and four/five seater :- Repair/Replacement of cushion 4"thick best quality of Dunlop make covered with tapestry cloth approved quality with a cost not less than Rs. Two hundred per meter for seat only complete all as specified and directed.

All as per serial item No 19.00 aboveabove but back ---ditto---

Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct vision.

Wooden/Letherite Sofa - Removal of existimg treatment like cushioning, tapestry cloths and paint/polishing to Wooden /latherite Sofa of tow seater/three seaterand supply and fixing of cushion 4"thick best quality of Dunlop make covered with tapestry cloth approved quality with a cost not less than Rs. Two hundred per meter for wraping to handle back & seat only complete all as specified and directed..

Repair Teapoy wooden/table centre/table peg/teapoy verandah :- Replacement and fixing of leg and one stiffener of 1st class hard wood sheesham complete all as specified and directed.

All as per serial item No 21.00 above but rail .

All as per serial item No 21.00 above but for top but for table centre/Teapoy wooden/Table peg.

All as per serial item No 21.00 above but for french polishing but for table Peg/Table centre/teapoy wooden.

Repair to book rack/book case steel & book case steel (glazed) :- Replacement and fixing of glass size 10" x 28" x 5mm thick steel (glazed) including requisite repair complete all as specified and directed.

All as per serial item No 22.00 above above but for book case steel size 66"x12"x33".

Repair to Stool steel 305x305x510 :- Cleaning the steel surfaces with sand paper and painted with two coats of synthetic enamel white paint complete all as specified and directed.

Repair to Locker bedside wooden:-Taking out unservicable shutter and S&F new shutter of 18 mm thick of block board, including providing 4 mm thick soft wood edging alround. complete all as specified and directed.

Taking out unservicable back ply and S&F new back ply with 6 mm thick commercial ply complete all as specified and directed.

Replacement of rail of frame with shesham wood rail of appropriate size

Replacement of handle with Aluminium alloy handle fabricated type anodised 100 mm long Make:Classic ISI marked.

Replacement of hasp & staple with 75 mm aluminium anodised hasp & staple.

Replacement of hinges with 20 mm wide continuous (Piano) hinges mild steel bright finished or electro galvanised to door shutter of locker .

Replacement of top with 18 mm thick block board commercial.

Replacement of leg with shesham wood leg of appropriate size .

Cleaning the surfaces with sand paper and french polish to all wooden surfaces exposed to direct version.

Repair of steel rack 6 tier 1950x915x485mm, 76"x36"12" , 78"x36"x18" off sizes - Material and labour for painting with synthetic enamele OG colour paint on steel/iron surfaces of steel rack after preparation of surfaces with sand paper complete all as specified and directed.

Removing of unserviceable old defaced mirrors unserviceable back plywood of mirror frame of table dressing ladies and S&F sheet glass electro copper plated mirror 5 mm thick and plywood commercial BWR grade 6 mm thick for back side to mirror frame and fixing to table all as specified and directed.

All as per serial item No 26.00 above but for table dressing gents complete all as specified and directed.

Removing of unserviceable chipped/old plastic laminated sheet from the table dressing ladies, S&F plastic laminated sheet natural teak veneer finish 1 mm thick on the top on both sides and on drawer front side with beading 3 mm thick complete all as specified and directed.

All as per serial item No 26.02 above but for table dressing gents complete all as specified and directed.

Removing of unserviceable broken plywood from drawer bottom of table dressing ladies and S&F plywood commercial BWR grade 6 mm thick all as specified and directed.

All as per serial item No 26.04 above but for table dressing gents complete all as specified and directed.

Removing the unserviceable knobs, S&F 25 mm chromium plated knobs with suitable screws all as specified and as directed for table dressing ladies and gents.

Wooden Side Board :- Removal of unserviceable top and Supply and fixing wooden top of existing size & specification complete all as specified and directed.

Removal of unserviceable sides, racks and shutter of side board and S&F eith existing specifications sides, racks and sutter complete all as specified and directed.

Material and labour for preparing the surface/ground with putty and applying two coat of first quality synthetic enamale paint/polishing where ever required complete all as specified and directed.

M/S Bangali Ram