MOEI and fans i c compound lighting for 96 DA flats for Mayur Vihar Ph-II, Delhi. Renovation of EI including fans and fittings as and when required for 20 Quarters

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: Executive Engineer(E) PWD M-253

Name of Work:- MOEI and fans i/c compound lighting for 96 DA flats for Mayur Vihar Ph-II, Delhi. (SH:- Renovation of EI including fans & fittings as & when required for 20 Quarters.)

NIT No.:126/EE(E)/PWD M-253/2025-26 Estimated Cost:-35,96,608/-

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Sub Head Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 DSR-2025 ITEMS Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A 20 Point 1189 374800 Excess(+) Full Conversion INR

2 Group B 20 Point 1362 374800 Excess(+) Full Conversion INR

3 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required. Group A 200 Point 687 374800 Excess(+) Full Conversion INR

4 Group B 200 Point 752 374800 Excess(+) Full Conversion INR

5 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm 1000 Metre 104 374800 Excess(+) Full Conversion INR

6 3 x 4 sq. mm 2000 Metre 222 374800 Excess(+) Full Conversion INR

7 3 x 6 sq. mm 1000 Metre 326 374800 Excess(+) Full Conversion INR

8 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm 400 Metre 151 374800 Excess(+) Full Conversion INR

9 25 mm 500 Metre 168 374800 Excess(+) Full Conversion INR

10 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 100 Each 545 374800 Excess(+) Full Conversion INR

11 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 100 Each 659 374800 Excess(+) Full Conversion INR

12 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). 100 Each 757 374800 Excess(+) Full Conversion INR

13 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. 120 Each 807 374800 Excess(+) Full Conversion INR

14 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch 430 Each 121 374800 Excess(+) Full Conversion INR

15 Bell push 20 Each 159 374800 Excess(+) Full Conversion INR

16 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 100 Each 402 374800 Excess(+) Full Conversion INR

17 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 200 Each 47 374800 Excess(+) Full Conversion INR

18 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm) 20 Each 354 374800 Excess(+) Full Conversion INR

19 3 Module (100mmX75mm) 40 Each 384 374800 Excess(+) Full Conversion INR

20 8 Module (125mmX125mm) 80 Each 517 374800 Excess(+) Full Conversion INR

21 12 Module (200mmX150mm) 20 Each 614 374800 Excess(+) Full Conversion INR

22 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. Each 112 374800 Excess(+) Full Conversion INR

23 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without CB/RCCB/Isolator) 8 way, Double door Each 374800 Excess(+) Full Conversion INR

24 16 way, Double door Each 3367 374800 Excess(+) Full Conversion INR

25 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole Each 285 374800 Excess(+) Full Conversion INR

26 Single pole and neutral Each 643 374800 Excess(+) Full Conversion INR

27 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 A Each 2866 374800 Excess(+) Full Conversion INR

28 Supplying and fixing brass batten/ angle holder including connection etc. as required. Each 154 374800 Excess(+) Full Conversion INR

29 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. Each 104 374800 Excess(+) Full Conversion INR

30 Brush Less DIrect Current (BLDC) Motor Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al bodyPower Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, sutable for operation with regulator) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Each 2695 374800 Excess(+) Full Conversion INR

31 LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim 12 -15 watt Each 715 374800 Excess(+) Full Conversion INR

32 18 watt Each 920 374800 Excess(+) Full Conversion INR

33 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -5 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) 18- 22 Watt Each 681 374800 Excess(+) Full Conversion INR

34 36 watt Each 678 374800 Excess(+) Full Conversion INR

35 Market Rate Items Supplying, installation, testing & commissioning of 300mm Sweep, 900 rpm, single phase heavy duty exhaust fan complete in the existing opening, including making good the damage etc as required. Each 5115 374800 Excess(+) Full Conversion INR

36 Supplying, installation, testing & commissioning of 200 mm sweep Air Flow Capacity 520cc/min 1350 RPM plastiic body Exhaust fan complete with louver/shelter i/c cutting the suitable size round hour for above fan making good the damage etc as required. Each 2026 374800 Excess(+) Full Conversion INR

37 Supplying ,Installation, testing and commissioning of 10 W LED Bulk head Fitting made out of PDC aluminium housing with polycarbonate diffuser & integrated electronic driver having system lumen efficacy: ≥80 lm/W, PF: ≥0.90, CRI: ≥80, Colour Temperature: 5700K/6500K, LED life ≥ 50,000Hrs at i/c connection with 1.5 sq mm FRLS PVC insulated connection sq mm FRLS PVC insulated copper conductor, single core cable and earthing complete as required. Each 1489 374800 Excess(+) Full Conversion INR

38 Supplying, installation, testing & commissioning of 20W LED Mirror light of polycarbonate housing with diffuser & integrated electronic driver having system lumen efficacy: ≥90 lm/W THD: ≤10%, PF: ≥0.90, CRI: ≥80, Colour Temperature: 5700K/6500K, LED life ≥ 25,000Hrs i/c connection with 1.5 sq mm FRLS PVC insulated connection sq mm FRLS PVC insulated copper conductor, single core cable and earthing complete as required. Each 977 374800 Excess(+) Full Conversion INR

39 Supplying, installation, testing & commissioning of Decorative wall light fixture with white glass diffuser suitable for 02 Nos. 9 W LED Lamp including LED lamps & connection with 1.5 sq mm FRLS PVC insulated connection sq mm FRLS PVC insulated copper conductor, single core cable and earthing complete as required. Each 3026 374800 Excess(+) Full Conversion INR

40 Creadit for dismantle of following items Piano / Moduler switch / Socket, Bell push, fan regulator Each 1 374800 Excess(+) Full Conversion INR

41 Switch boxes (assorted) with phenolic sheet / moduler plate Each 5 374800 Excess(+) Full Conversion INR

42 MCB DB (Assorted) Each 20 374800 Excess(+) Full Conversion INR

43 Single pole MCB Each 3 374800 Excess(+) Full Conversion INR

44 Double pole MCB/RCCB Each 6 374800 Excess(+) Full Conversion INR

45 Ceiling fan Each 250 374800 Excess(+) Full Conversion INR

46 Exhaust fan / Fresh Air Fan Each 150 374800 Excess(+) Full Conversion INR

47 LED Batten / Bulk Head / Mirror light Each 10 374800 Excess(+) Full Conversion INR

48 Batten / angle Holder Each 1 374800 Excess(+) Full Conversion INR

49 PVC insulated copper conductor S/C cable (Assorted) Kg 250 374800 Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information