WBPWD/EE/JED/eNIQ54/2024-25

Amount

Dismalting of existing wiring,switch board,light,fan & distribution boards as per direction of EIC.

Supplying & fixing 415 V, 125 A HRC fuse base cut out unit (3 nos) fixed on hylum on wall with necessary nuts bolts washers etc. incl. S&F 1 nos neutral link set. [Make:- L&T/Havells/Siemens]

Supplying and fixing 100A, 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.[Make-L&T]

Supplying and fixing 63A, 415V, TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make:-L&T]

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (4 way) with s & f Four Pole 100A, MCCB as incoming and 3nos 415 V 63A TPMCB, 1 no. 415V 32A TPMCB of Breaking capacity 10kA & C characteristics as outgoing [Make- Legrand] (i) Legrand (enclosure 607913) 4 way (ii) Incomer:- 415 V 100A FP MCCB [Make-Legrand] (iii) Outgoing:- 415 V 63A TP MCB [Make:- Legrand] 415 32A TP MCB [Make- Legrand) (iv) Cable end box- 2 nos

Supplying and fixing 4 way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment comprising as per direction of EIC. (i) Incomer:- 415 V, 63A FP MCB isolator- 1 nos [Make- Legrand] (ii) 240 V, 6-32A SP MCB- 12 nos [Make- Legrand]

S&fixing 240 v 6 to 10 A per way , SPNMCB DB with SS enclosure double door with IP - 42/43 protection with 40A DP MCB as incomer and 16 no SP MCB (C - Curve 10 ka) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl interconnection with suitable size of cupper wire & neutral link & provision of earthing attachment.. (Make-Legrand) 2+ 16 way.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]

(Average run 6 mtr)

(Average run 12 mtr)

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish (on board)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

supply of the following items

Mas LED Tube 1200mm 18W 865 T8 I – 2100lm[Make-Philips/Crompton/Bajaj]

Single LED tube light fittings [Make Philips, Model No. TMC 502 1xT-LED 22W/Crompton/Bajaj]

Single LED tube light fittings [Make Philips, Model No. TMC 502 2xT-LED 22W/Crompton/Bajaj]

Supply & Delivery of 48"(1200 mm), 53W; 370 RPM; 215 CMM; 1 star ac ceiling fan with blades, canopy, fork, rubber bush etc. [Make-CG, model- high speed, orient- Summer Breeze Pro]

Supply & Delivery 9"(230mm), 1370 RPM, 40 Watt Heavy duty AC Exhaust fan incl. necy., all connection. [Make- EPC]

Supplying LED bulk head light fitting (Philips cat no.-WT202W LED6S NW PSU S3 PC/ CG /Wipro)

Supply only 2core 10sqmm pvc insulated AL/Armoured LT cable [Make-Gloster/Polycab/KEI)

Supply only 4 core 25 sqmm pvc insulated AL/Armoured LT cable [Make-Gloster/Polycab/KEI)

Supplyand fixing of 12watt LED BULB ON EXISTING HOLDER POINT

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections Etc..

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for Al

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.

Supply & fixing 250 v 2no 3 pin 6 A flush type plug socket with 2no 6 A modular switch (Anchor make)switch on 6 module GI box with 4 module top cover & earthing attachment.

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) through cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F 19mm dia 3mm thick heavy gauge polythene pipe without continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

a. 3 x 22/0.3 (1.5 sqmm)

b. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

c. 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) through cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F 2 no 25 mm dia 3mm thick heavy gauge polythene pipe without continuity wire by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

a. 2.5sqmm

b. 4sqmm

c. 6sqmm

d. 10sqmm

e. 16sqmm

Supply & Fixing of aerodynamically designed 250 V 100 WATT LED street light luminaire on the top of the pole. complete with all accessories with single piece die cast alluminium housing and heat resistant toughened glass with IP 66 protection, minimum Efficacy > 110/120 LPW and with in-built SPD protected out door luminaires embossed with manufacturer's logo and must have 5 year warranty from OEM. [Make:- Crompton LED, cat no CRP-411-100-57-SL-GL-NSG Street Light / equivalent make of Philips /Wipro / Havells]

Supplying & Fixing PVC waterproof type looping cable box(SINTEX/As per EIC) size minimum 200x150x100 mm deep comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, two provision of compression type brass cable gland for upto 4- core 16 sqmm PVC/A cable and having lined with rubber gasketted top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole, including S&F 40x6 mm thick, suitable "C" type 4mm thick MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Finolex 'FR') through 3mm thick Polythene pipe.

S & installation of single phase Timer DB comprising of (2+8) way SPNMCBDB (Enclosure 607711) [Make : Legand] ( Conceled in wall) , 32 A DP MCB [Make : Legrand] , analog time switch 3 module [Make L&T, Cat No. AUTS03ANA00) ,32 A DP power contactor (Type - MNX, 32 - 2P Cat No - CS90241) , Toggle switch 3 position with suitable interconnection .

Laying of cable upto 2 core 16 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

2 core 10 sqmm

Laying of one No. cable 2 core 10 sqmm sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

2 core 10 sqmm and 4 core 25 sqmm

Laying of cable 4core 25 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting

4 core 25 sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

2 core 10 sqmm

4 core 25 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

2 core 10 sqmm

4 core 25 sqmm

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level(TATA-Medium)

Excavation of soil for installation of Earth Electrode and filling & ramming.(morrum soil)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Painting of existing 9 mtr long Steel Tubular Pole of lengths and no. of coats of paint,as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. Upto 9.0 mtr. long pole (i) One coat of red lead/Zinc chromate priming. (ii) 1st coat of synthetic enamel paint over the primer (iii) 2nd coat of synthetic enamel paint over the 1st coat

S & Installation of Feeder pillar box of suitable size made with 5 mm MS plate having front & back opening hinged with door handle and double locking arrangement with Godrej lock and keys. There shoulde be proper ventilation spout at the centre of the top side. The pillar box should be erected over suitable brick structure with plaster and neat cement finish and to be painted by two coats of paints over two coats of primer. The pillar box should be provided with following incl. S&F switches, necessary connection etc. as required., (i) S&F 415 V, 100 A, 4 Bar Copper BBC--1 Nos. (ii) S&F 32 A FP MCB Isolator with 4 way MCB enclosure. (iii) Auto/Manual Toggle Switch--1 Nos. (iv) Diode type neon indicator lamp--3 Nos. (v) Ammeter & Voltmeter

chargres for WBSEDCL new load connection.

M/S JOGMAYA ENTERPRISE (BID ID -6168634)

SREE KRISHNA ELECTRICAL (BID ID -6165261)