Construction of RO Plant Building At Ward No.04, Vinayagar Kovil street in minjur town panchayat

Amount

Earth work excavation for foundation in all type of soils as may be directed except in hard rock requiring blasting and also including refilling the sides of foundations with excavated soil in layers of 15cm thick well rammed and consolidated and depositing the surplus earth within the compound in places shown by the departmental officers with initial lead of 10m and lift of 2mts. for ordinary soil, cost including all costs etc., complete as per standard specification.

Collection, supply and filling with gravel in foundations, pavement and basement, in layer of not more than 15cm thick, well ramming and consolidating etc., complete, cost including all costs etc., complete as per standard specification.

Collection, supply and filling with stone dust in foundations, pavement and basement, in layer of not more than 10cm thick, well ramming and consolidating etc., complete, cost including all costs etc., complete as per standard specification.

Plain cement concrete of mix 1:4:8 (one cement four M-sand eight course agreegate using hard broken granite stone jelly of 40mm gauge for foundation levelling course including shuttering dewatering wherever necessary and laid in layers of not more than 10cm thick etc., complete cost including all costs etc., complete as per standard specification.

Supplying, fabrication and placing in position mild steel or deformed steel bars for all reinforced cement concrete terms of steel transporting straightening, cutting, bending, cranking, binding, welding, etc., including cost of binding wire M.S. chairs laps to fix the reinforcement in all positions, all labour and materials etc., complete cost including all costs etc., complete as per standard specification.

Providing and laying in position , standardised concrete mix M20 grade in acordance with IS 456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture(plasticiser / super plsaticiser ) in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cum) 7730 kg of 20mm machine crushed stone jely and with about (3.3 cu.m) 5156 kg of 10-12 mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand but excliding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating and machanical vibrators finishing curing etc., and providing fixtures like fan clamps in RCC floor/roof slabs wherever necessary without claiming extra etc., complete complying with standard specifications and as directed by the departmental officers, The coarse and fine aggregates tobe used should comply with the requirements of IS standards(No seperate payment will be made by the excess usage of materials.)

Supplying and erecting centering for sides and soffits including support and strutting upto 1.00 m high for plain surface with all cross bracing using mild steelsheet of 90cm X 60cm and stiffened with welded mild steel angle of size 25mm X 25mm X 3mm for boarding laid over silver oak ( country wood) joists of size 10cm X 6.5cm cost including all costs etc., complete as per standard specification. For Grade beam

Supplying and erecting centering for sides and soffits including support and strutting upto 3.50m high for plain surface with all cross bracing using mild steelsheet of 90cm X 60cm and stiffened with welded mild steel angle of size 25mm X 25mm X 3mm for boarding laid over silver oak ( country wood) joists of size 10cm X 6.5cm ( space at about 90cm c/c and supported by casurina props 10cm to 13cm dia spaced 75cm c/c etc., complete cost including all costs etc., complete as per standard specification. For columns

Supplying and erecting centering for sides and soffits including support and strutting upto 3.50m high for plain surface with all cross bracing using mild steelsheet of 90cm X 60cm and stiffened with welded mild steel angle of size 25mm X 25mm X 3mm for boarding laid over silver oak ( country wood) joists of size 10cm X 6.5cm ( space at about 90cm c/c and supported by casurina props 10cm to 13cm dia spaced 75cm c/c etc., complete cost including all costs etc., complete as per standard specification. For beam and slab

Brick work in cement mortar 1:5 (one cement, five M-sand) using III class country bricks of size 0'- 8 3/4" x 0'-4 1/4" x0' 2 3/4" from approved kiln with best quality and strength including all cost and conveyance of all materials and labour charges and all other costs etc., complete as per standard specification.

Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxide primer, including cost and conveyance of material to site and all labour charges and other incidental charges etc., complete complying with std specification. 1.00 M x 2.10 M size as per TWAD SOR 20.0.II

Supplying and erecting pull and push type rolling shutter manually operated with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer, cost including all cost and conveyance of material to site and all labour charges and other incidental charges etc., complete complying with std specification. Gear operated type (from 8 m2 to 12 m2 area)

Supplying and fixing of M.S.grill and gate etc., as per design approved by department engineer including cost of materials and labour charges etc., complete cost including all costs etc., complete as per standard specification.

Special ceiling plastering and finishing the exposed surfaces of all RCC items of works with cement mortar 1:3 (One cement and three sand) of 10 mm thick including hacking the surface and providing necessary cement mortar nosing, beading as per size and specification wherever necessary using the same mix in all floors etc., cost including all cost and conveyance of all materials to site, labour charges and other incidental charges etc., complete complying with std specification.

Plastering in cement mortar 1:5 mix (one Cement and five sand) of 12 mm thick etc., cost including all cost and conveyance of all materials to site, labour charges and other incidental charges etc., complete complying with std specification.

Painting two coats with approved First quality plastic emulsion paint over cement plastered wall surface and ceiling including cost of one priming coat, Cost of all materials, all labour charges, brushes, cleaning preparing the surface,scaffolding charges and curing charges etc., complete cost including all costs etc., complete as per standard specification.

Painting two coats over new iron work for doors, windows and ventilators iron bars weld mesh wire mesh screen, steel bars flats and other similar works etc., with two coats of approved first quality of synthetic enamel paint over the existing tred oxide primer in all floors The rate inclusive of cost of all materials and labour brushes and scaffolding charges etc., complete cost including all costs etc., complete as per standard specification.(The paint should be got approved by the Municipal Engineer before use on work)

Providing Rain water down fall pipe using 110 mm dia pipe of 4 kg/c.m.2 with necessary specials and clamp etc., complete.including cost and conveyance of materials, all labour charges for fabrication, fixing with all furnitures fittings etc., complete as directed by departmental officer.

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator) etc., complete cost including all costs etc., complete as per standard specification. (SD-22)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.as per (SD 38)

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor, with TW round blocks on wall or ceiling with flu.tube with PVC unsheathed Copper leads from terminals to the fitting. (Sd-88)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL.(SD 83)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains, cost including all costs etc,., complete as per standard specification. SD 65

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry cost including all costs etc., complete as per standard specification. SD 233

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cumPurifier to deliver Potable Water with World HealthOrganisation (WHO) Standards withfollowing 285 Accessories (a) MS Skid- 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve(with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP 1 No.(d) Vertical Pump 2-9, 2.00 HP/Single Phase 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents /Osmonic (USA)- 1 No. and Membrane Pressure Vessel40 x 40 -1 No. & Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20" Filter with Housing - 1 No.,Low Pressure Switch- 1 No., Level Switch - 1 No. &Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittingsand Float Control etc. The rate should be inclusive of allcivil works, wherever necessary to install the System inposition and intact.