Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC 34 C R AVENUE JABAKUSUM HOUSE 3RD FLOOR ROOM NO 312 KOLKATA 700 012 | KOLKATA | WEST BENGAL | 700012 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹37.7 L+₹1.1 L (3.13%)Rejected-Finance 1 1 MEREDITH STREET KOLKATA 700072 INDIA | KOLKATA | WEST BENGAL | 700072 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹38.0 L+₹1.4 L (3.80%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L3₹38.0 L+₹1.4 L (3.80%)Rejected-Finance 10 1 GROUND FLOOR WEST GHOSH PARA JAGATDAL JAGATDAL JAGATDAL NORTH 24 PARGANAS WEST BENGAL 743125 | 24 PARAGANAS NORTH | WEST BENGAL | 743125 | L3 | Rejected-Finance Other than lowest | |
| 5 | L4₹38.5 L+₹1.9 L (5.17%)Rejected-Finance | L4 | Rejected-Finance Other than lowest |
Tender Value
₹36.8 L
EMD Value
₹73,600
Closing Date
9 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
SPL REPAIR TO PATH, PCC AND HARD STANDING AROUND BLDG NO P-192 (NEW COMD BLDG) INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA
2023_MES_617536_1
8172/GE(FW)/E8
Open Tender
Civil Works
Item Rate
120 days
GE(FW) Kolkata
Ref as per tender documents
7 documents required · 7 mandatory
₹500
GE (FW) Kolkata
₹73,600
16 Nov 2023
11 Sept 2023
11 Oct 2023
11 Sept 2023
9 Oct 2023
25 Sept 2023
Amount
Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soils, complete all as specified and directed.
Removing excavated material exc. 1.50 KM but n exc. 5.00 KM where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and paving's not exc 150 mm thickness (above or below ground level) and removal of debris outside MOD land complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removal of debris outside MOD land and disposed off complete all as specified and directed.
Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc., complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles, all as specified and as directed by the Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties etc complete all as specified and directed.
M&L for plain cement concrete (1:5:10) type E-2 (using 40 mm graded stone aggregates) as in foundation filling, sub base as in floors and mass concrete complete all as specified and directed.
M&L 100 mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floors, complete all as directed by the Engr-in-Charge.
M&L 75mm thick Cement Concrete type C-2 (1:3:6) using 40mm graded crushed stone aggregate, as in Plinth Protection, / sub bases etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L 50 mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floors, finished even and smooth without using extra cement as directed by the Engr-in-Charge.
M&L for plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones , bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and directed.
M&L for mild steel TMT Bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm or securing with clips, etc., complete all as specified and as directed.
M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed .
M&L Brick Work with fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L for rendering 15 mm thick built in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid separately).
Supply only liquid water proofing compound all as specified and as directed.
Cutting holes in brick walls in cement mortar for inserting holdfast or pipes and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but not exc one brick, etc., complete all as specified and directed.
S&F in position, at or near ground level, factory made precast cement concrete kerb stone blocks, in M-25 grade cement concrete, fixed to the required line, level and curvature, jointed in cement mortar 1:3, including making joints with or without grooves (thickness of joints, except at sharp curves shall not be more than 5 mm) including making drainage opening wherever required complete all as specified and directed.
M&L 25 mm thick pre polished coloured chequered tiles of size 300mm X 300mm, with M-40 grade, jointed & pointed in neat cement slurry with white or coloured to match the shade of tiles, laid over & incl 20 mm thick screed bed in cement mortar 1:6 complete all as specified & directed.
M&L 25 mm thick pre polished coloured chequered tiles of size 380mm X 380mm, with M-40 grade, jointed & pointed in neat cement slurry with white or coloured to match the shade of tiles, laid over & incl 20 mm thick screed bed in cement mortar 1:6 complete all as specified & directed.
Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Cost of sand cushioning is deemed to be included in the quoted rates)
All as per Item No. 22 above, but using old serviceable paver blocks obtained from dismantling (NOTE: Sand cushioning, if required shall be measured and paid separately)
M&L Sand filling under floors under paver block, thickness not exc 50 mm including consolidation complete all as specified and as directed
M&L for heavy duty coloured ceramic floor / paving tiles of size 300 x 300x 10 mm thick in floor etc set and jointed in near cement slurry and pointed in white or coloured cement to match the shade complete including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed (Make : Johnson, Model: Endura or equivalent model in other approved makes)
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
M&L for preparation of newly plastered or concrete surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.
S&F PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.
M & L for providing precast RCC 1:2:4, type B-1 (nominal mix) type A1 using 20 mm graded stone aggregates, set and laid in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary formwork, moulds, etc complete all as specified and as directed. (NOTE: MS reinforcement shall be measured and paid separately)
M&L for mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165, for portion framed and hung as gates, including pintle hinges, stops, hand made sliding bolts etc., all as specified and directed by Engineer-in-Charge.
S&F Cast iron work grade FG-150 unmachined in brackets, gratings, railing, frames, manhole covers and similar articles, weight exc 5 Kg each, as in repairs, completed all as specified and as directed.
Taking up old manholes cover with frame (heavy duty) and raising/ refixing in proper position, set in cement mortar 1:3 and haunting with PCC 1:2:3 type B-1 (using 20mm graded crushed stone aggregate) concrete surround finished even and smooth without using extra cement all as directed by the Engineer-in-Charge.
PODDAR SALES CORPORATION
R T BUILDERS
RADHA ENTERPRISE
ESS PEE UDYOG
BHARUKA ENTERPRISES
NICE INFOTECH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .