PROVN OF HARD STANDING FOR VEHICALS PARKING AT ARMY PUBLIC SCHOOL AND ADDN ALTN TO RATION STORE AT NAGROTA MIL STN

Amount

SCHEDULE A PART-I Surface excavation nexc 30cm and averaging 15cm deep in soft/loose soil complete all as specified & directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Sof t/ loose soil complete all as spd & directed

M/L for PCC (1:4:8) type D-2 (40 mm grade aggregate) as in foundation, filling and mass concrete complete all as spd & directed

M&L150mm thick (spread thickness) soiling (or sub base) with broken boulder or quarried stone, interstices filled, surface formed and rolled with 8 to 10 tonne power roller and consolidated to reqd gradient and camber complete all as specified.

M&L for hard core of broken bricks n exe 63 mm, deposited, spread and levelled in layers n exe 15 CM thick, watered and rammed to a true surface complete

M & L for cement conc type D2 1:4:8 (40mm graded aggregate) 100mm thick complete all as spd & directed

M & L Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified

M&L machine pressed coloured pre cast concrete interlocking paver block ( with grey cement and no pigment) any shape and size confirming to IS -15658-2006 of 80 mm thickness ,Electrovibro (M-40 grade) galzed finished block complete all specified and directed by Eng-in-charge and GE

M&L Brick work with subclass 'B' old size bricks/ tiles straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 exc 6m mean radius. complete all as spd & directed

M&L PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate as in copings, plinth course, damp proof course, bed blocks, benching, PCC cills and similar items. complete all as spd & directed

12. M&L for 100mm PCC 1:2:4 type B1 (20 mm graded aggregate) on top surface and finishing surface of concrete pavements by brooming finish etc.complete. complete all as spd & directed

M&L for PCC (1:3:6) Type C1 using 20mm graded stone agg as in surface channel & drain incl form work. complete all as spd & directed

M&L Rendering 15 mm thick on other than fair faces of brick work, stone masonry or concrete surfaces in cement mortar 1:4 on wall surfaces, finishing the surface even and smooth with out using extra cement all as specified.

Extra for forming fair finished drain or channel 25cm inner girth in cement concrete using extra cement including forms ,moulds,mitred/stopped ends etc complete all as spd & directed

All as per item no.14 above ,Add or deduct for each 25mm girth over under 30 cm girth complete all as spd & directed

M&L for Providing precast cement concrete solid building block over 10cm in width and setting in mortar 1:6 using pre cast cement concret Block 1:3:6 type C-1 using 20mm graded stone agg all as specified and directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint . complete all as spd & directed

Returning filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm in any type of soil complete all as spd & directed

Removing excavated meterial n exc 500 m and depositing where directed at a level n exc 1.5 m above starting point in soils

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site. complete all as spd & directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site. complete all as spd & directed

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles. complete all as spd & directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness. complete all as spd & directed

Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided. complete all as spd & directed

Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed

S&F 100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding. complete all as spd & directed

S& F Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate 140mm complete all as spd & directed

S&F Extruded aluminium alloy handles fabricated type anodised of size 125mm long 12mm dia. complete all as spd & directed

S&F MS 300 mm ordinary rat rails rod pattern springs including roller and roller plate. complete all as spd & directed

S&F Hold fast/clamps of mild steel stay for rain water pipes etc confirm to Fe-290 Gde E 165.

S&F 250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S&F Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed.

S & F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.

S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.

M&L for 35mm thick 2nd class HW rail and style plain framed, factory made paneled shutter (one panel) without interlocking rail and 12mm veneered particle board with commercial veneering on both faces the size of rail and style as per IS -1003 (Pt-I)kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats.

S&F Galvanised mild steel wire cloth 0.457mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples

S&F Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.in each pane

M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally)

Supply only integral water proofing compound.

M&L for Providing 10mm thick cement plaster in CM 1:4 on parapets over roof and finished surface even and smooth without using extra cement

M&L for Applying two coats of synthetic enamel paint on new steel surfaces any description, not otherwise described over 10 cm width or girth

M&L for Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces.

M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .

M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall care putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .

M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint . complete all as spd & directed

M&L for Complete removal of existing treatment applying two coats of cement base paint old wall surface . complete all as spd & directed

M&L for Machine cut kota stone flooring 18-20 mm khick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface. complete all as spd & directed

M&L for Machine cut kota stone slab 18-20mm thick in skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in CM ( 1:4) including taking out of existing dado. complete all as spd & directed

M&L for 40mm thick PCC (1:2:4) type B1 using 20mm graded stone agg as in flooring finished even and smooth using extra cement. complete all as spd & directed

M&L for 450x300x7mm thick glazed ceramic tiles as fixed on walls/ vertical surfaces over 15mm cement rendering in cement mortar 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) , removing serviceable tile to store and rubbish off the premises.

M & L for PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection ( 50mm thick ) finished even and fair all as specified.

M/L for extra for forming fair finished drain or channel 30 cm inner girth of cement concrete using extra cement including forms moulds, mitred/ stopped ends etc. complete all as spd & directed

M & L for RCC 1:2:4 type B-1 ( using 20mm graded crushed stoneagg) as in chajjas shelves and similar items.

M & L for Form work to chajjas troughs and similar items including edges. complete all as spd & directed

M & L for Form work to edges of concrete flats RCC/PCC band exc 5 cm but exc 10 cm. complete all as spd & directed

S&F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia. complete all as spd & directed

All as above but 6mm to 8mm dia -ditto-. complete all as spd & directed

Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauze, thickness, including Nainital or similar pattern roof coverings etc complete.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates or flat sections) including distance pieces, cleats etc Fe 410-W (Gde E-250) quality A complete as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed

M&L M.S.work as in wind ties for roofing incl. securing bolts, posts and struts complete work conforming to Fe 290 Gde E-165 etc.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling of wall and ceiling boards(fibre, pulp,insulation etc) or insulation board/slabs/blankets any thickness including cover fillets all as specified.

Supply & fixing 'E' board 605 x 605 x 4 mm thick white prelaminated set & embosed, reinforced, designer ceiling board tiles of approved texture fixed at all height laid on hot dipped galvanised iron imposed grid with 24 mm wide T-section exposed flanges which shall be powder coated, white,.the frame work shall comprises of main runner made from 0.33 mm thick galvanised steel sheet and of size 24 x 32 x 300 mm and spaced at 1200 mm center to center fixed to be structural soffits by approved hangers at 1200 mm rawl center, hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level and fasteners and screws etc., the last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall, flush fitting of 120 mm long cross tee (with double stiching) to be interlocked between main runners at 600 mm center to center, size 1200 x 600 mm modules, cross tee longer than 600 mm to be supported independently on 600 x 600 mm moduler to be formed by fitting 600 mm long cross tee centrally between the 1200 mm cross tee. Tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19 x 19 mm and 300 mm long of white colour all as per manufacturer's instructions complete all as directed.

M & L for 75mm thick cement conc type D2 1:4:8 (40mm graded aggregate) as in sub base of floor complete all as spd & directed

M&L chequered cement tiles concrete 20cm x20cm x 25mm thic, set jointed in neat cement slurry in floor including 20mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc all as specified. .

M&L for Providing and injecting chemical emulsion for Post Constructional Anti termite treatment along external wall below concrete or masonry apronn using chemical emulsion @ 2.25 ltr per liner mtr including drilling and plugging holes etc in apron complete all as spd & directed.

M&L for treating of soil under existing floor using emulsion @one ltr per hole 300mm part including drilling and pluging 12mm dia holes with cement mortar 1:2 (to match the floors all as specified and directed.

Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories for modular switches/sockets etc, with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly One light point/fan point/ bell point controlled by one switch 5 Amp complete all as spd & directed.

All As per Srl item N0 76 above but for one socket out let 5 Amp controlled by one switch on same board with other switch .

All As per Srl item N0 76 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .

All as per item No 2 above here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified.

S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified.

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.

S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 6 module complete all as specified.

All as per Item No-84 above but 3 module complete all as specified.

All as per Item No-84 above but 2 module complete all as specified.

S & F Modular blanking plates 1 module complete all as specified.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings along with 10 watt LED bulb complete all as specified and directed.

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing LED lights fitting 1x 18 W, 220V, AC connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F building security light luminaries eenergy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete ,all as specified and directed.

S&F sheet metal enclosure distribution board SPN 08 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.

S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete

S&F MCB single pole 5 to 32 Amps 10 KA 240 volts "C" series complete

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 4 core nominal cross section in service connections

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete.

BHARTI CONSTRUCTIONS (BID ID -3162263)

M/S VINAY KUMAR SHARMA (BID ID -3167789)

M/S Shankardass Devidass (BID ID -3162554)

M/S CJ CONSTRUCTIONS (BID ID -3162364)

Karmnaya Construction (BID ID -3162862)

ASHWANI KUMAR KHAJURIA AND SONS (BID ID -3167850)

ASHFAQ AHMED MANHAS (BID ID -3162762)