REPAIR AND MAINT TO FLOORING, JOINERIES, PLASTERING AND SANITARY WORKS ETC IN HQ CIF(K) SIG REGT AND CIF(K) MT/FRI UNDER AGE (I) CIF (K)

Amount

Demolition of cement concrete un reinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge.

Dismantiling of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish off the premises.

Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key scrubbing down with water etc

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.06sqm, but not exceeding 0.11sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Glazed ceramic tiles, coloured, of size 350mm x 250mm/450 mm x 350mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortor 1:4, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.11sqm, but not exceeding 0.18sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Machine cut kota stone slab 20 to 25 mm thick, as in flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, laid over and including 20 mm thick screed bed or bedding layer in cement mortor 1:6, complete all as specified and directed by the Engineer-in-Charge.

Machine cut kota stone slab 20 to 25 mm thick,as in vertical surfaces such as riser of steps, skirting/dado etc. over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, laid over and including 10mm thick rendering on brick/concrete surface in cement mortor 1:4, complete all as specified and directed by the Engineer-in-Charge.

M&L for chequered cement concrete coloured tiles of size 20 cm x 20 cm x 25mm thick set, jointed and pointed in neat cement slurry in floors, paths etc, with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete, 1:2:4, type B-1 using 20mm graded crushed stone aggregate, 25mm thick, surface finished fair to receive top layer of flooring, complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.

M&L 25mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and directed.

M&L 32mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of shelves, for water tubing etc and making good, cutting exc 10cm girth but not exc 20cm girth in stone walls

Dismantiling of water tanks of capacity exc 250 & n exc 500 ltrs incl all necessary fittings complete.

S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks, double layer (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified in SSR part-I

S&F 32mm dia PPP-R gate valves (brass inserted) as per requirement of the site complete all as specified.

S&F 32mm dia PPP-R ball valves (brass inserted) as per requirement of the site complete all as specified.

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets & 32mm dia waste coupling, complete all as specified and directed.

S&F Vitreous China Water closet (Squatting pattern) "Orissa Pattern" size 580x 440 mm white with 'P' or 'S' trap, front or back inlet and foots rests any pattern (excluding flusing cistern and flush pipe) in repairs complete.

S&F Vitreous China urinals, hallf stall urinals (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern.

S&F in repair 15mm dia Bib taps cast copper alloy, fancy type, chromium plated, crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule.

S&F in repair 15mm dia fancy type pillar taps, cast copper alloy with capstan heads, chromium plated scewed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified.

S&F swivel shower of PTMT any colour for fixing with 15mm pipe with shower arm 15mm size ,195 mm long with bend of 45 degree with flange of PTMT any colour fixed in repairs.

S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete as specified and fixed in repairs.

S&F 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete as specified .

S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality complete all as specified.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings n.exc 1.5sqm each

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings exc 1.5sqm n.exc 4 sqm each

Taking down shutter exc 1.0 sqm but not exc 2 sqm complete all as specified

S&F 2nd class hard wood Plain , solid , straight chowkats and frames, wrought , framed rebated on the solid , rounded or chamfered put together with glue pinned at joints, complete all as specified.

S&F PVC Door frames of size 50 mm x 47 mm made of 5 mm single side pre-lam colour PVC sheet and edges will be painted to match with pre lam sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

S&F 35 mm thick 2nd class hard wood Plain framed, panelled shutters(any number of panels), with panel of timber flat on both sides (feather edged) or 12 mm thick BWP of veneered particle board medium density wood commercial face veneers fixed to chowkats.

S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mitred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (a) supplied and fitted to chowkats with plain, chamfered or rounded mitred and rebated bars any numbers.

S&F framed work such as grills & gates, gratings with ends of bars shouldered on forged in spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410 (or) Fe-310-0

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18 mm fixed with tinned tacks, or galvanised wire staples.

S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified

S&F Butt hinges, medium weight cold rolled mild steel of 100 mm size ISI marked.

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size

S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as fixed in repairs.

M & L for applying two coat of synthetic enamelled paint over one coat of pink primer including preparation of new wooden surfaces of any description not otherwise described over 10 CM girth or width complete all as directed by the Engr in charge

M & L for applying two coat of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width complete all as directed by the Engr in charge

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified.

M&L for preparation of old painted surfaces after complete removal of existing treatment and applying two coat of oil bound distemper over chalk whiting complete all as specified.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali-resistance primer paint complete all as specified.

Demolition of cement concrete un reinforced in ground floors and pavings exceeding 15cm thickness (above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge.

Cleaning the side/bottom of sunken floor before applying 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in padding of sunken floor finishing the surface even and smooth by using extra cement by using WPC 3% by weight of cement (i.e Pidilite/Aquatyte/ Dr fixit etc, WPC shall be measured separately) complete all as specified and directed

Supply only integral waterproofing compound

M&L for 15mm thick rendering in 1:3 CM with using 3% WPC as in sunken portion and finishing the surface even sand smooth without using extra cement and applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per Sqm in sunken floor including cleaning surfaces complete all as directed.

M&L for cement concrete type E2, 1:5:10 (using 40 mm graded aggregate) as in sunken floor, complete all as spd and directed.

Demolition and breaking up of drain pipes 100mm bore (Salt glazed ware/AC pipe/reinforced concrete pipe/PVC pipe ) set in cement mortar including concrete bed & haunching (if required) and removing away complete from site, complete all as specified and asdirected by the Engineer-in-Charge.

S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed to wall,complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to wall,complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) bends (any radius), 110mm bore, with or without oval access doors, complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) bends (any radius), 75mm bore, with or without oval access doors, complete all as specified and as directed by the Engineer-in-Charge.

S&F PVC (SWR) vent cowl 75mm dia, complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) floor trap, plain with grating suitable for 75mm dia grating including jointing with solvent cement, complete all as specified and directed by Engineer-in-Charge.

Dismantaling boarding/false ceiling of any description fixed in any postion with nails, complete all as specified and as directed by the Engineer-in-Charge. .

S&F GI frame work size of grid 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofit at approx 900 mm centre to centre with GI cleat and steel expansion fasterner with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457mm centre to cnetre including hangers 6mm dia.GI (upto 1200mm length) adjusting level fixed tp roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm ling and expansion hold fasterner 12.5mm dia 40mm long including 4mm thick non asbestos fibre cement building boards fiuxed or laid/inserted to timber/GI frame work complete all as specified and directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed by the Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges, valley gutters etc. fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

Note :- An amount of Rs. Rs 18,548.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

rafiq trading co (BID ID -3305286)

M/S MAHIR MUNEER (BID ID -3305392)