57/EUDC-VI/LESA T.G./2023-24

Amount

Transportation from central store to site line material.

Transportation from central store to site ST pole 11/9 mtr.

Transportation from central store to site PCC Pole 8.5 Mtr.

Transportation from central store to site 11/0.4 KV 25/63/100 KVA T/F.

Transportation from central store to site 250/400 KVA T/F.

Transportation from central store to site 11KV XLPE Cable.

Transportation from central store to site LT Cable 1x630/400/240 or 3.5x240/400 sqmm.

Transportation from central store to site ACSR Rabbit/dog/ Racoon/Weasel conductor.

Transportation from central store to site ABC Cable 3x120/ 95/50/25 sqmm.

Transportation from central store to site Pilfer resistance metering cubical.

Transportation from central store to site 11KV Pole mounted CT/PT.

Fabrication erection of substation type double pole on ST pole along with fixing of necessary clamp ,accessories required including supply and fixing of MS channel on top dropper with arrangement of fixing of 3 Nos pin insulator as per RESPO Specification & direction of E/I.

Erection of 9/11 mtr long St pole with fixing of necessary items for HT/LT line, Such as V-type X-arm,F-bracket,11KV Pin/Dic insulator ,guarding angle with nut and bolt its refilling of earth and ramming as per RESPO Specification & direction of E/I.

Prepare proper space for construction of plinth.

Construction of T/F plinth of size 2x2x1.5 Mtr with first class bricks and masonry work in the ratio 1:4cement and course sand with RCC Top 1:2:2 cement sand and course sand stone grit with MS bar and MS channel for resting of T/F.

Fabrication and fixing of wiremesh fencing of 11/0.4KV S/S made as per requirement 3 mtr. height 45x45x5 mm angle frame and 1 No horizontal runner by 40x5 mm MS flat then welding of wiremesh on it 50x25mm made of 12 SWG, diagonal bracing of all the frame panel welded with MS flat 25x3mm support, grouting properly by cement concrete and course sand.

Construction of masonry type DP Box with First first class brick ballast, course sand ,cement and MS Bar local sand with Henley type fuse unit and 4 Nos. copper bus bar, All material arrange by contractor.

Dragging of PCC Pole to pit site ,digging of pit erection and grouting of 8.5 Mtr Long PCC pole with fixing of necessary items, such as v-type x –arm, F-bracket, 11KV Pin/Disc insulator guard angle as per RESPO, cement, coarse sand provided by contractor.

Providing and fixing of 11KV DO Fuse set along with clamp and nut bolt.

Laying of 11 KV cable 3x/3570/120/185 sqmm in pukka road by drilling method.

Laying of 11 KV cable 3x/3570/120/185 sqmm in pukka road by digging trench upto 1 Mtr. deepx0.60 Mtr. width putting cable boxing with 1st class brick and sand and refilling of earth.

Hoisting of cable will be passed through GI pipe required size duly clamped with pole at the bottom, middle and top of the pole.

High pressure testing of 11 KV Cable by high pressure equipment.

Laying of LT Cable with suitable size of Alu lug.

Erection and commissioning of AB Conductor of size 3x120/95/50/25sqmm.

Laying stringing and sagging of 3 Phase 3 wire 11KV line on ACSR Weasel/Rabbit /Raccoon /Dog conductor as per RESPO Specification & direction of E/I.

Ordinary Earthing by MS Earth Rod 2500 mm long earth wire and GI wire provide by department.

Grouting binding nuzzling of stay set complete including fixing of necessary clamps accessories

Installation of 11KV CT/PT on double pole connected with metering unit along with providing and fixing of all accessories such as S/S base MS Flat, clamps, nut and bolts, its jumpering and commissioning.

Dragging of pilfer metering cubical inside the metering room its installation and commissioning

Earthling of Pipe type with 60 feet deep boring and providing Jindal make pipe "B" class 1" dia and GI strip 25x5, 6mtr long attached with clamps and GI pipe.

Safe installation of 11/0.4 KV 25/63/100 KVA T/F on double pole by providing and fixing of all accessories along with making HT LT Connections.

Installation and commissioning of 250/400KVA T/F on plinth including its connection in between 11KV and LT line mounting of Copper L-piece 300x65x6mm ,providing Al.lugs of suitable size (only T/F provide by Department.

Fabrication of LT Bus bar and fixing on consumer premises.

Fabrication and fixing of 11KV TPMO Set.

Fabrication and fixing of HT Cable stand with the help of 65x65x6mm MS angle 3.5 mtr. High above ground level and grouting properly.

Dismantling of 11KV/LT Line from existing pole and disconnect all the cables.

Dismantling of all the fitting from double pole.

Dismantling of all the fitting from pole.

Dismantling of ST/PCC /Rail Pole and carriage back to JE Dump store.

Grouting of ST/PCC pole by cement, course sand and stone grit.

Painting of ST Pole by Al paint and post office red Paint.

Plinthing of ST/PCC pole by cement, stone grit and course sand.

RAJ ENTERPRISES

DEEPAK ENGINEERING