REPAIR TO PLUMBING, RWP, SANITARY FITTINGS AND OTHERS AT WAC LINE UNDER AGE B/R-1 (W) OF GE (W) AGRA

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks, old size straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified.

M&L for brick work ,except bricks, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non-skid coloured ceramic tiles (1st quality/ premium quality) 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .06 Sqm but not exc 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non-skid coloured ceramic jointfree tiles (1st quality/premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for glazed ceramic coloured tiles joint free of size 350x250 x 7 /450x350x7mm (Ist quality/Premium quality), in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including rendering 10mm thick plastering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling PVC water tanks 500 ltrs capacity complete all as specified and directed.

Dismantling PVC water tanks 1000 ltrs capacity complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tank triple layered ISI mark (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank triple layered ISI mark (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

S&F in repairs 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection complete all as specified and directed.

S & F 15mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S & F 20 mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F in repairs steel Soap case three rack corner glass shelf, any type, fixed to plugs with stainless steel screws complete all as specified and directed.

S&F CP health faucet with 1.5 m PVC connection as in repairs complete all as specified & directed.

S&F in repair sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repairs PVC connections 15mm size, 450mm long with PTMT nuts on both ends complete all as specified & directed.

S&F in repair 15mm bore brass chromium plated (CP) wall mixer for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore brass chromium plated (CP) concealed type external threaded stop valve cast copper alloy ,screwed down,high pressure,with crutch or btterfly handle ,screwed both ends for iron pipe wall mixer for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs white Vitreous china European wash down water closet pan fixing with bolts including connecting to 100mm bore CI ‘P’ or ‘S’ trap complete all as specified and directed.

S&F in repairs vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe and including concrete bedding) complete all as specified as directed.

S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding taps, chain & plug and porcelain stopper but including waste fitting & brackets, cutting for and pinning ends of brackets complete all as specified and directed.

S&F in repairs Internal kit including flush handle & float for low level flushing cistern complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repairs stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495.mm x420mm with bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495.mm x420mm with bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F in repairs Cabinet Mirror size 600x450mm all as specified and directed.

S&F in repairs CP shower rose with Or without swivel joints,any size including fixing to steel pipe or union all as specified and directed.

S & F in repairs swivel shower rose of PTMT any colour for fixing with 15 mm pipe (Min wt 40 gms) complete all as specified and directed.

S & F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm complete all as specified and directed.

S & F in repair S/S towel rail 20 mm dia D type 600 mm long between flanges complete all as specified & directed.

S&F in repairs brass CP mixer for mixing of hot & Cold water Wash basin screwed down for iron pipe and fixed to 15 mm pipe complete all as specifed and directed.

S&F in repairs PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 110mm complete all as specified and directed.

S&F in repairs PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 75 mm complete all as specified and directed.

S&F in repair PVC (SWR) bends of 110mm radius to PVC SWR pipes complete all as specified and directed.

S&F in repair PVC (SWR) bends of 75mm radius to PVC SWR pipes complete all as specified and directed.

PVC (SWR) branch piece, single (single Y) equal or unequal 75mm bore complete all as specified and directed

PVC (SWR) branch piece, single (single Y) equal or unequal 110mm complete all as specified and directed

S&F in repair 1mm thick Steel sheet duccan suitable screws for 500/1000ltr PVC tank (For Monkey minace), design and size approved by GE

S&F CP Jet spray heavy duty with PVC connection as in repair complete all as specified & directed.

S&F in repairs 32 mm bore PVC pipe as in waste pipes for sinks & WHBs complete all as specified and directed.

S&F in repair PTMT waste coupling (half/full threaded) 32mm bore suitable for kitchen sink, basin etc with long screw shanks and fly nuts, flange end bedded in red lead complete all as specified and directed

S&F in repair 100mm dia PTMT grating (min weight 25 Gms) complete all as specified and directed

S&F in repair stainless steel utensil plate rack 1mm thick of size 0.60x0.90m with three shelves using SS-304 grade complete all as specified and directed

S&F in repairs Plastic seat cover for EWC solid type complete all as specified and directed.

S&F in repair 15 mm bore pillar taps copper alloy with capatan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore (external threaded) bib taps cast copper alloy cromium plated long body fancy type with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule complete all as specifed and directed.

S&F in repairs angle valve in repairs cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union, bore of pipe 15 mm, complete all as specified and directed.

S&F in repairs angle/ stop valve of PTMT any colour high pressure screwed for iron pipe or for union, bore of pipe 15mm (min wt 90 gms), complete all as specified and directed.

S&F in repairs pillar taps of PTMT any colour high pressure screwed for iron pipe or for union, bore of pipe 15mm (min wt 110 gms), all as specified and directed.

S&F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight -90gms) complete all as specified and directed.

Taking down cement or cemant lime plaster of any discription on bricks or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10mm thick plastering on concrete surfaces of ceiling in CM 1:3, finished the surface even & smooth complete all as specified and directed.

M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.

M&L for 15mm thick plastering in CM 1:4 with liquid WPC on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed. Note : WPC shall be measured and paid separately

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of average 1mm thick Birla putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Taking down chowkhats or frames not exc 1.5 Sqm each with shutters complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in clause No. 8B.2 at Sl page No. 143 to 144 and shown in drawing on sl page No 156 of SSR 2010 respectively and as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, incl fixing arrangement, suppling & fixing in opening as per specification complete all as specified and directed.

S&F in repairs butt hinges medium weight cold rolld mild steel of 100mm size complete all as specified and directed.

S&F in repairs aluminium anodized 200mm long barrel tower bolt of extruded section complete all as specified & as directed.

S & F aluminium alloy handles size 150mm fabricated type anodised complete all as specified and directed.

M&L of PCC 1:4:8 type D-2 as in foundation, filling of mass concrete etccomplete all as spd and dir.

Cleaning of roughened surface of sunken floor by brushing with wire brush to remove all dirt and apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished rough (sunken floor/wall) and then applying two course treatment as follow :- (i) Applying bitumen primer @ 0.40Kg/Sqm (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3.50 Kg/Sqm with 100 GSM/Sqm non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap. The membrane has to be laid with LPG torch and over lap sealed and finished neat. (iii) 40mm bore GI pipe for spout pipe length 0.75m

M/s K S Builders

M/S Solanki Brothers

RAJEEV CONSTRUCTION

Asha Construction

C P Singh and Co