Tender ID

Delhi

Active

Works

Repair and Maintenance Works

06/EE/EMU/AUD/2026-27

Ambedkar University Delhi

DR B R Ambedkar University Delhi, K P Campus, Del | West Delhi, Delhi

Amount: ₹1.8 LCloses: 5 Nov 20265d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published22 Oct 2026
Closes5 Nov 2026
Bid Opening5 Nov 2026

Tender Value

₹1.8 L

EMD Value

₹4,000

Closing Date

5 Nov 2026, 3:00 pm5d left

Tender Inviting Organisation

Name

Executive Engineer

Address

Room No 22, Dr. B R Ambedkar University Delhi, Lothian Road, Kashmere Gate Delhi -110006

Work Description

Supplying, Installation, Testing and Commissioning of LED Street lights, flood lights, post top lantern including laying of cable in the Karampura campus of Dr. B.R.Ambedkar University Delhi.

Tender Information

Tender ID

2026_AUD_300344_1

Reference Number

06/EE/EMU/AUD/2026-27

Tender Type

Open Tender

Product Category

Repair and Maintenance Works

Form of Contract

Works

Period of Work

15 days

Location

DR B R Ambedkar University Delhi, K P Campus, Del

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per NIQ

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredCopy of valid reg. certificate of CPWD, PWD etc or exp. in other Govt. organization if any (.pdf)

RequiredScan copy of EMD DD along with deposit receipt (.pdf)

RequiredCertificate of work exp. (completion/performance certificate indicating value of work done) of work (.pdf)

RequiredCopy of document in support of Turnover as per NIQ (.pdf)

RequiredScan copy of GST Registration certificate (.pdf)

RequiredScan Copy of PAN card (.pdf)

RequiredPrice bid undertaking on letter head as Per NIQ (.pdf)

Finance

RequiredFinancial bid (BOQ) (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹4,000

Important Dates

Last Activity

22 Oct 2026

Published

22 Oct 2026

Bid Opening

5 Nov 2026

Download Starts

22 Oct 2026

Download Ends

5 Nov 2026

Submission Starts

22 Oct 2026

Clarification Period

22 Oct 2026 - 5 Nov 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (7 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Electrical Work
1.01	LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 50 watt	6	Each	1.25	₹7.5
1.02	LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥ 135 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg - 120 deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM(Standard Deviation Colour Matching) <5,Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR,PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 150 Watt	12	Each	1.25	₹15
1.03	Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm	120	Meter	1.25	₹150
1.04	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 10 sq. mm (22mm)	1	Each	1.25	₹1.25
1.05	Supply and Installation of LED Post top lantern with die cast aluminium spigot, spun aluminium powder coated top cover and clear acrylic diffuser IP 65 (CAT Ref. HLPT-04-40-CW or equivalent)	2	Each	1.25	₹2.5
1.06	Supplying, Installation, Testing and Commissioning of 40W LED decorative post top lantern with die cast aluminium Housing and OPAL PC difusser, IP 65 ( CAT Ref. HLPT-21-40-CW or equivalent).	3	Each	1.25	₹3.75
1.07	Supply of 1.1 KV grade XLPE armoured aluminium conductor cable of size 3 X 10 sq.mm	120	Meter	1.25	₹150

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.28 MB

Work Item Documents

BOQ_400924.xls

BOQ • 0.29 MB

Quotation.pdf

Tender Documents • 0.39 MB

tenderdownload_BOQ Light KPC.pdf

Additional Documents • 0.39 MB

tenderdownload_BOQ.xls

Additional Documents • 0.29 MB

tenderdownload_NIQpdf.pdf

Additional Documents • 0.26 MB

tenderdownload_Quotation.pdf

Additional Documents • 0.39 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Electrical Work
1.01	LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 50 watt	6	Each	1.25	₹7.5
1.02	LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥ 135 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg - 120 deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM(Standard Deviation Colour Matching) <5,Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR,PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 150 Watt	12	Each	1.25	₹15
1.03	Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm	120	Meter	1.25	₹150
1.04	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 10 sq. mm (22mm)	1	Each	1.25	₹1.25
1.05	Supply and Installation of LED Post top lantern with die cast aluminium spigot, spun aluminium powder coated top cover and clear acrylic diffuser IP 65 (CAT Ref. HLPT-04-40-CW or equivalent)	2	Each	1.25	₹2.5
1.06	Supplying, Installation, Testing and Commissioning of 40W LED decorative post top lantern with die cast aluminium Housing and OPAL PC difusser, IP 65 ( CAT Ref. HLPT-21-40-CW or equivalent).	3	Each	1.25	₹3.75
1.07	Supply of 1.1 KV grade XLPE armoured aluminium conductor cable of size 3 X 10 sq.mm	120	Meter	1.25	₹150

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Electrical Work

1.01

LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 50 watt

Each

1.25

₹7.5

1.02

LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥ 135 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 °C to 50 °C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg - 120 deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM(Standard Deviation Colour Matching) <5,Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR,PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 150 Watt

Each

1.25

₹15

1.03

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Upto 35 sq. mm

120

Meter

1.25

₹150

1.04

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 10 sq. mm (22mm)

Each

1.25

₹1.25

1.05

Supply and Installation of LED Post top lantern with die cast aluminium spigot, spun aluminium powder coated top cover and clear acrylic diffuser IP 65 (CAT Ref. HLPT-04-40-CW or equivalent)

Each

1.25

₹2.5

1.06

Supplying, Installation, Testing and Commissioning of 40W LED decorative post top lantern with die cast aluminium Housing and OPAL PC difusser, IP 65 ( CAT Ref. HLPT-21-40-CW or equivalent).

Each

1.25

₹3.75

1.07

Supply of 1.1 KV grade XLPE armoured aluminium conductor cable of size 3 X 10 sq.mm

120

Meter

1.25

₹150