Balance work Auditorium at PRTC Jahan Khelan

Amount

12.5mm thick cement plaster 1:5.(CSR-15.10)

20mm thick cement plaster 1:5 in two coat work (CSR-15.21)

Conglomerate floor 40mm thick cement concrete topping 1:2:4(using mechanical mixer for mixing of material):(CSR-14.6)

Providing and laying Kotah Stone tile flooring and landing 20mm thick of size not less than 22"x22"and as per pattern shown in the architectural drawing, conforming to samples of corporation and subject to approval of architect/ Engineer-in-Charge laid over 12.5mm thick bed of cement sand mortor 1:3 and jointed with white cement slurry mixed with pigment to match the shade of Kotah stone including rubbing and wax polishing complete in all respects.(CSR-14.86)

Providing and laying Kotah Stone tiles 20mm thick in skirting or dado as per sizes specified in architectural drawing, conforming to samples of corporation and subject to approval of architect/ Engineer-in-Charge laid over 12.5mm thick cement mortor 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and wax polishing complete in all respects.(CSR-14.86)

Extra labour for projected nosing in treads of steps of Kotah/granite stone slab including rounding and giving an ornamental shape to the required nosing.(CSR-14.56/B)

Providing and laying polished granite stone slab (Jet Black/ Cherry Red/ Elite Brown, at Eye or equivalant) 18mm thick flooring in required design and patterns, in leniar as well as curviliniear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge.(CSR-14.89/B)

Providing and fixing 16 gauge stainless steel pipe railing of Grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia stainless steel pipe, Balusters of 40mm dia stainless steel pipe and guard 3 Nos. of 15mm dia stainless steel pipe complete in all respect.(CSR-18.39)

Providing & fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacturer including providing & fixing top and bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stooper etc. to be paid separately)(CSR-17.101)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board confirming to IS:12823 Grade I Type II, in panelling fixed in aluminium door, window, ventilator shutters and partition frames with C.P. brass / stainless screws etc. complete as per the architectural drawings and the directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.(CSR-17.46/II))

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness.(CSR-17.47)

Providing and fixing hydraulic door closer ISI mark with necessary screws etc. complete :(CSR-17.43)

C) I.S.I Designation No. III (size of door 851mm to 1000mm)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm including pointing in white cement mixed with pigment of matching shade complete.(CSR-14.125)

Providing and fixing face Tiles 230 x 75 x17 mm machine made vibro-hydraulic compacted Burnt Clay brick Tile silicon coated on one side (Colour Terracotta series) on wall with under layer of 12 mm thick cement plaster 1:3 and jointed with neat cement matched with pigment complete as per drawings, specifications and to the entire satisfaction of engineer- in- charge. (CSR-15.81)

Wrought iron and mild steel ladders, framed grills, grating etc.with ends of bars, rivetted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position including priming coat with genuine red lead and painting two coats with ready mixed paint for metallic surface in all shades on new steel work or iron work complete in all respects as per Architectural drawings and to the entire satisfaction of E.I.C..(CSR-18.4+ MR)

Dismantling brick work tile, masonry or tile lining(CSR-8.5)

B) In cement

Dismantling concrete(CSR-8.6)

D)Cement concrete plain1:2:4 mix

E) Reinforced cement concrete

Earth work in filling inclusive of compensation for earth in excavation in ordinary soil or soil containing gravel or kankar upto 40% and filling in 15 cm layers in foundation and plinth including ramming watering and consolidating under floors with earth brought from outside complete in all respects including all leads & lifts. (CSR-6.8 b I, 6.4&5.2 (i))

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.(CSR-11.4/I)

Reinforced cement concrete M-25 for slabs, wall exceeding 20cm thickness, straight and curved beams, girders, stairs, battens and lintels, square or rectangular column, fascias, parapets and other thin vertical sections and walls 10cm to 20cm thickness etc. mechanically batch mixed using batch type concrete mixture as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement, centring and shuttering laid in position complete in all respects in super structure.(CSR-10.21)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : Anodised aluminium (Powder coated Aluminium (Minimum thickness of Powder coating 50 Micron)(CSR-17.45)

A) For fixed portion and chawkhats

B) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete(CSR-16.60)

Final grinding on kotah stone, white marble, baroda green flooring (NS)

Brushing and cleaning black granite stone tiles 20mm thick in flooring, skirtings, risers of steps, dado walls.(NS)

Finishing walls with textured exterior paint of required shade with two coats applied @ 3.28 litre/10Sqm over and inclusive base coat of water proofing cement paint applied @ 2.2kg/10Sqm.(CSR-16.58)

Wall painting with plastic emulsion paint of approved brand and manufacturer to give and even shade ( two or more coats)(CSR-16.53)

Providing and laying waterproofing treatment with first layer of 2 coat of bitumen 85/25@ 1kg/Sqm and then laying tarfelt and again 2 coats of bitumen 85/25@1kg/Sqm over tarfelt complete in all respect and to the entire satisfaction of engineer-in-charge (NS)

Cement concrete 1:2:4 gola 10cmx10cm quardrant along junction of roof with parapet wall finished smooth, where specially specified by the Engineer-in-Charge.(CSR-13.55)

Providing and fixing toughened glass 8mm thick complete fixed on frame to the entire satisfaction of Engineer in charge. (NS)

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia M.S. tube 1.5mtr centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S.clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of E.I.C. The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.(CSR-31.36)

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.(CSR-8.46)

Hiring Crane 80 tonnes for laying trusess on roof.(CSR-2.12)

Stripping and stacking iron sheets of a roof including ridging, flashing, eaves boards gutters and down pipes.(CSR-8.11)

Providing and fixing (PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa (Fy=550 MPa) metallic coated with Zinc-Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 (Min. 150 bm/ mm2 total on both sides) pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25%-40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(NS)

B) 0.80 mm (+ 0.05 %) thick

Providing and fixing Gutter 250mm wide with PPGL 0.50 thick (TCT) manufactured from zinc / PREMIUM 0% aluminium alloy coated high tensile steel, having 30% minimum yield strength of 550 MPa of approved colour fixed by means of self-drilling screws limped washers as per the manufactures guidelines complete in all respect and to the entire satisfaction of engineer in charge.(CSR-13.27/IV)

Ridges and valleys 45cm overall, in plain G.I. Sheet 0.80mm fixed with galvanzed iron J. and L. hooks 10mm diameter, G.I. Limpet and bitumen washers complete

Extra for carriage of material beyond first 5 kms from approved quarry to the site of work.(CSR-5.2)

I) Fine Sand

II) Coarse sand

III) Crushed bajri

Public Health Portion

Painting GI pipes and specials with superior quality synthetic enamel paint in all shades in new work, two coats paints including cleaning, rubbing surface etc.

Providing and fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer- in Charge). (CSR-30.61)

I) Size 1500mm x 600mm or any other size

Providing and fixing in position C.P. Acrylic Shelf with C.P. bracket and guard rails of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs and C.P. brass screws, complete in all respects. (CSR-30.59)

I) C.P. Acrylic Shelf size 560mmx130mm

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P. brass screws complete in all respects.(CSR-30.6)

Providing and fixing in position towel rails /ring of approved make (to the approval of Engineer-in-charge) fixed in with rawl plugs embedded in walls with brass screws, complete in all respects.(CSR-30.58)

I) C.P. brass towel Rails size 15mm dia 610mm long

II) C.P brass towel ring

Providing & Fixing in position Grab Bar Jaquar make vista range or equilent fixed in to wall with C.P. brass screw complete in all respect including cutting and making good the walls etc.(CSR-30.00)

I) 450mm Long.

Providing & Fixing of Soft Fiber Acoustical Suspended Ceiling System Glass Fiber Micro look/Square edge tiles with 15mm black silhouette Exposed Groove Grid. NRC 0.90, Colour Black & white, Light Reflectance >84% with Fire Resistance in module size of 595x595x 15 mm. The grid should be of 15mm grid sections i.e. the Main Runner 3000mm in 38 mm web height, 1200mm & 600mm Cross Tees in web height of 26mm with thickness 0.3mm.Installtion to be comprise main runner spaced at 1200mm centre securely fixed to the structural soffit using suspension system at 1200mm maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres and as per the drawing and the work complete in all respects to the satisfaction of Engineer in-charge. The SUSPENSION SYSTEM accessories consisting of HLC Sleeve Anchor Fasteners of thread size 6.5mm x 25/5 with Soffit Cleat made of Galvanized steel of size 27 x 37 x 25 x 1.6mm and Level Clip in dimensions of 85x30x0.8mm with 4.00 mm GI wire. (Make:ANAKON/TOP ACOUSTICS/ ARMSTRONG/ECOPHONE/HARA DESIGN/ ANUTONE

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of raw plugs at 450 mm centre, with 25mm long drywall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of drywall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum resistant board. (Make : USG BORAL/SAINT GOBAIN/GYPROC)

AUDITORIUM WALL PANELLING

Providing and Fixing of wood grooved panel having system NRC up to 0.88 with lineal perforation. The high grade HDDMR panels shall be melamine laminate of size 2440mm x128mm x 16mm with 3mm groove at 28mm pitch, Tongue and Groove edges for seamless mounting having density of 800kg/m3 (base panel confirming to IS:12406 and laminated panel confirming to IS:14587). The back of the panels are perforated with a nonwoven fabric covering of 0.2mm for providing Sound absorption via the acoustic impedance method. Panel is fixed by using GI Frame work 2400mmx50mmx0.50mm spaced at 600mmx600 c/c & 12 mm waterproof ply framework spaced at 400mm centers with suitable brackets and the system is backline with 50mm Rockwool insulation @48kg density and along with all accessories example: chicken mesh and all. (Make: ANAKON/TOP ACOUSTICS/ ARMSTRONG/ECOPHONE/HARA DESIGN/ ANUTONE)

Providing and Fixing of Spandex System using GI Section section 50x50mm web flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel With 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing 50mm thick Rock wool @48kg density insulation intact with chicken mesh wires. 1200x1200mm breach with 10.0mm with the distance of 22-25.0mm each hole giving the NRC 0.9-1 to be mechanically fastened on the aluminium section. Then 12mm clip rail system are screw fixed on the breach coffer .Then the Spandex is stretched over the clip rail system with as per Architect choice-Ref attached specifications for more details. (Make:ANAKON/TOP ACOUSTICS/ ARMSTRONG/ECOPHONE/HARA DESIGN/ ANUTONE

Providing & fixing 15mm thick Acoustic Panels in size 1220 x 610mm of Natural panel having Premium Square Edge. Panels are made of Pine Wood fibers containing cellulose binded with Magnesite. The panels will be screw fixed @ 200mm on GI metal frame of 50 x 50mm making a grid of 610 x 610mm c/c. The frame is to be made in proper line after leveling. The panels will be backed with 50mm Rockwool of 24 kg/cum inserted inside the grid of 610 x 610mm which will comprise of minimum NRC 0.90 as per IS: 8225/ ISO: 354/ ASTM: 423 – 90 a. The panel meets the stringent fire test required having Class ‘P’ rating for Ignitability test as per BS 476 part 5 and Class ‘1’ rating as per BS 476 part 7 for Surface Spread of Flame test. Class ‘P’ and Class ‘1’ are the highest rating. BS 476 part 6 Fire Propagation index, I = not greater than 4.11. It should meet all technical parameter. (Make: ANAKON/TOP ACOUSTICS/ ARMSTRONG/ECOPHONE/HARA DESIGN/ ANUTONE)

Providing and Fixing of Phulkari Pattern using GI section 50x50mm web flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel With 120GSM zinc coating specially designed with a backing 50mm thick Rock wool @48kg density insulation intact with chicken mesh wires. 1200x1200mm breach with 10.0mm with the distance of 22-25.0mm each hole giving the NRC 0.9-1 to be mechanically fastened on the aluminium section. Then 12mm clip rail system are screw fixed on the breach coffer .Then the Spandex is stretched over the clip rail system with as per Architect choice-Ref attached specifications for more details.

AUDITORIUM STAGE CEILING AND WALL

Providing & fixing 15mm thick Acoustic Panels in size 1220 x 610mm of Natural panel having Premium Square Edge. Panels are made of Pine Wood fibers containing cellulose binded with Magnesite. The panels will be screw fixed @ 200mm on GI metal frame of 50 x 50mm making a grid of 610 x 610mm c/c. The frame is to be made in proper line after leveling. The panels will be backed with 50mm Rockwool of 24 kg/cum inserted inside the grid of 610 x 610mm which will comprise of minimum NRC 0.90 as per IS: 8225/ ISO: 354/ ASTM: 423 – 90 a. The panel meets the stringent fire test required having Class ‘P’ rating for Ignitability test as per BS 476 part 5 and Class ‘1’ rating as per BS 476 part 7 for Surface Spread of Flame test. Class ‘P’ and Class ‘1’ are the highest rating. BS 476 part 6 Fire Propagation index, I = not greater than 4.11. It should meet all technical parameter.Panels shall be fixed with Black color matting for final finish. (Make :ANAKON/BAUX/ECOPHON)

Providing & Fixing of Soft Fiber Acoustical Suspended Ceiling System Glass Fiber Micro look/Square edge tiles with 15mm black silhouette Exposed Groove Grid. NRC 0.90, Colour Black & white, Light Reflectance >84% with Fire Resistance in module size of 595x595x15 mm. The grid should be of 15mm grid sections i.e. the Main Runner 3000mm in 38 mm web height, 1200 mm & 600 mm Cross Tees in web height of 26mm with thickness 0.3mm.Installtion to be comprise main runner spaced at 1200mm centre securely fixed to the structural soffit using suspension system at 1200mm maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600mm module. Cut cross tees longer than 600mm require independent support. 600x600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450mm maximum centres and as per the drawing and the work complete in all respects to the satisfaction of Engineer-in-charge. The SUSPENSION SYSTEM accessories consisting of HLC Sleeve Anchor Fasteners of thread size 6.5mm x 25/5 with Soffit Cleat made of Galvanized steel of size 27 x 37 x 25 x 1.6mm and Level Clip in dimensions of 85x30x0.8mm with 4.00 mm GI wire. (Make:ANAKON/TOP ACOUSTICS/ ARMSTRONG)

Providing and Fixing Acoustical Wooden Stage Flooring Compatible with Underground signal cabling and Pop-Up Boxes: Providing and fixing 65/75 X 18 thick in random length, 2nd class teak wood planks flooring with tongue and groove joints on a layer of 15 mm thick Engineering wood of approved make and manufacture, fixed to hardwood joint 50 X 50 mm at 600 mm c/c in one direction and 50 X 50 on other direction, Hardwood joint resiliently supported on 100 X 100 mm Rubber Pads, the framework to be filled with 50mm thick Insulation Wool resin bonded insulation of density 24kg/cum. PU polishing of teakwood on the exposed surface: In horizontal/vertical plane (rate for flooring shall include providing additional framework required for housing microphone and power outlet junction - signal & Popup Stage boxes, If required providing and fixing hinged 18mm thick Engineering wood cover for the junction boxes. Work complete in all Respect. The Work shall be executed as per drawings, Specifications & Instruction of Engineer-in-charge (Make: ANAKON/ARMSTRONG/PERGO)

Proving & Fixing of floor covering carpet roll having pile construction of tufted loop pile with composition of 100% nylon, Flammability pass as per 16 CFR 1631#,smoke density ASTM E 662 less than 450,risilient primary backing of woven polypropylene, antistatic, anti skid property for commercial use, thickens 4-5mm and approximately pile weight of 850g/m2 of roll form with total weight of 1500 g/m2,roll length + roll width of 30mtrs/400cm,primary backing of action black/felt back with ecoflex NXT, light fastness of >4 and sound insulation of DLW 28db,thermal resentence :0.9 (m2) kw ,installed over existing Cementitious flooring with gorilla epoxy glue, spinta colour series or equivalent colour complete as directed by Engineer-in-charge. (Make:ANAKON/VIBRANT/WELLSPUN)

Providing and fixing Fully Insulated Non Metallic Wooden door at all levels. Wooden door should carry 120minutes Insulation properties. Main Door frame shall be Single rebate profile of section 120x70mm made out of Hard wood - Red meranti / Ivory Coast (2nd class) as per requirement with factory made groove of suitable size. The frame must be primed with Fire retardant primer. Wooden shutter must be of minimum 52mm of thickness finished with commercial ply on both faces. The Commercial ply may also be pasted with Laminate in desired shade (payable in extra item). The composite thickness of the core insulation will be 44mm consists of Lumber boards of approved make and treated wool Insulation material. The shutter should be provided with heat activated intumescent fire seal strip of size 20mm x 4 mm mounted in the suitable grooves all three sides except bottom provided on Exposed OR concealed wooden lipping .

All hardware’s, Fasteners and FR Glass shall be payable in Extra item. Door shutter provided with commercial ply on both faces with 1mm Thick Regular SF grade Factory pasted Laminate on both faces and Main frame made out of hardwood frame. Frame primed with Fire retardant primer. Fixtures of Door: (A) Supply & fixing of SS Ball Bearing Hinges of size 100 x 75 x 3mm complete with SS Screws (4 Nos per panel), (B) Supply & fixing of anchor fasteners of M10x120mm length. (C) Supply & fixing of door closers of (Except shaft door). (D) Supply & fixing of Stainless Tower Bolt 300mm Long for Double leaf door of height up to 2100mm with necessary screws as required. (E) Supply & fixing of Stainless Tower Bolt 600mm Long for Double leaf door of height up to 2400mm with necessary screws as required. (F) Supply and Filling the gap between wall & Door frame by using silicone sealant and Wool insulation on both side of the door. (Make: ANAKON/NAVAIR/MAHABIR)

Supplying, installation, testing & commissioning of 3W LED Unidirectional Exit Signage Light with inbuilt 2hours battery backup.

Providing and Making Ms pipe/bamboo scaffolding for creating false floor which help to excute the ceiling, electriacl, hvac and other allied works upto 30ft. The rates include all shuttering material, installation and demolistion complete in all respect.

REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01:

Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sqmm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20/25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6/10/16/20Amp. combined/ universal Socket (shuttered) 6/10/16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell) PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sqmm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-

i/b)Wiring fan point (With fan box)

ii)Wiring light point

iv)Wiring 6Amp. wall socket point

v)Wiring 6Amp. Plug control comprising wall socket point

vi)Wiring 16/20Amp. power plug control point

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:(CSR-34.12)

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

ii)Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)

PVC INSULATED FR COPPER CONDUCTOR CABLES:(CSR-34.09)

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

ii)Overall size 1.5sqmm (Un-sheathed)

iii)Overall size 2.5sqmm (Un-sheathed)

iv)Overall size 4sqmm (Un-sheathed)

EARTHING:

COPPER EARTHING (Upto 8 metre in Length):(CSR-34.14)

ii) Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets) /Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 4.50metre (14.76 feet) below G/L in the hole of excavation having bore dia 125mm and surrounded by salt & charcoal dust mixture (20kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 8metre in Length (including bore Length) G.I. pipe 20mm dia. (A-class) 3metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300x300mm (Heavy) around the hole of excavation:-

d) Earthing with 25mm x 5mm Copper Tape (upto 8Metre in Length)

COPPER EARTHING STRIP (As Additional Length):(CSR-34.14)

v) Fixing additional Length of earthing with Copper Tape (On Surface/ Flushed) with petty material as required etc.:-

d) Additional Length 25mm x 5mm thick Copper Tape

viii) Bonding to existing earth with 8S.W.G. (4mm dia) copper wire behind casing or fixed with stapples on wall.

CHEMICAL EARTHING: (NS)

Supply erection of Chemical earthing of Sheet metal/ iron clad Switches and metallic cases etc., with 3 mtr long 76mm dia copper bounded pipe including erection of the same, 3 metre below ground level with necessary Ground Resistance Improvement Powder (BackFill Compound), watering tank etc. and making connections (including boring & refilling).

Fixing additional Length of earthing with 8 S.W.G. (4mm dia.) copper wire in G.I. pipe with sockets, elbows, steel hooks and GI saddle clamps including painting etc.:-(CSR-34.14(vi))

b) Additional Length copper wire 8 S.W.G. (4mm dia.) in 20mm dia. G.I. pipe (Flushed)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:(CSR-34.17)

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCB's/RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

vi) TP&N Horizontal Double Door Distribution Board 6 way each

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:

MINIATURE CIRCUIT BREAKERS:

Supply & erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/415volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-(CSR-34.16)

ii) MCB Single Pole 6-32amp. (10kA, Curve-C)

xi) MCB Triple Pole 40amp. (10kA, Curve-C)

SUPPLY & ERECTION OF WIRING ACCESSORIES:(CSR-34.15)

Supply & erection of switches, sockets and other accessories (flush piano type/modular accessories) in the existing bakelite/modular cover frame including fixing & connections and petty material etc.

xxvi) Ceiling Rose (Flush Piano type)

S/E OF FITTINGS:-

S&E of Surface mounted LED Panel Downlighter 12watt, in powder coated white finished housing, round/ square shaped, , the fixture minimum 100 Lumens per watt and operating voltage between 140-270 volts input AC, Frequency 50Hz+3%, including making connections, complete in all respects as approved and desired by the Engineer-in-charge at Site.The certification and Specification of the LED fitting should be as per Specifications approved by the Tech. Adviser to Honble CM Punjab vide Letter No.: AT/2021/GL/1410-1422, Dated 06.05.2021. (NS)

Supply & erection of Indoor extruded aluminium LED tube fitting 20 Watt in aluminium alodized finish with opal diffuser with batten. The fixture minimum 100 Lumens per watt and operating voltage between 140-270 volts input AC, Frequency 50Hz+3%, including making connections, complete in all respects as approved and desired by the Engineer-in-charge at Site. The certification and Specification of the LED fitting should be as per Specifications approved by the Tech. Adviser to Honble CM Punjab vide Letter No.: AT/2021/GL/1410-1422, Dated 06.05.2021.(NS)

Supply & erection of of Recessed mounted LED Panel 36 watt, in powder coated white finished housing, square shaped, The fixture minimum 100 Lumens per watt and operating voltage between 140-270 volts input AC, Frequency 50Hz+3%, including making connections, complete in all respects as approved and desired by the Engineer-in-charge at Site.The certification and Specification of the LED fitting should be as per Specifications approved by the Tech. Adviser to Honble CM Punjab vide Letter No.: AT/2021/GL/1410-1422, Dated 06.05.2021.(NS)

Supply & erection of of Recessed mounted Warm White LED Panel Downlighter 18watt, in powder coated white finished housing, square shaped, The fixture minimum 100 Lumens per watt and operating voltage between 140-270 volts input AC, Frequency 50Hz+3%, including making connections, complete in all respects as approved and desired by the Engineer-in-charge at Site.The certification and Specification of the LED fitting should be as per Specifications approved by the Tech. Adviser to Honble CM Punjab vide Letter No.: AT/2021/GL/1410-1422, Dated 06.05.2021.

Supply and erection of 5 Star BLDC ceiling fans of 1200mm (48") sweep, witout regulator/ remote complete with 3 Nos. Blades, Down rod length : 26cm, Blades finish powder coated, Rated speed:350 RPM, Rated frequency 50 hz Rated Voltage 220-240 V including making connections & cost of petty material required for erection of same.(NS)

Supply & erection of heavy duty exhaust fan Sweep 300mm, 900/960RPM, Industrial Heavy Duty, complete with sheet metal impeller, mounting ring, MS arm, rubber cushion, totally enclosed motor epoxy powder coated, dynamically balanced blades suitable for operation on 220/240 volts single phase 50 cycles AC supply including making connections & cost of petty material as approved and desired by the Engineer-in-charge at site(NS)

Supply & erection of louver shutter for exhaust fans of size 300mm sweep, made of aluminium sheet with GI louvers, including cost of petty material etc. as approved and desired by the Engineer-in-charge at site.(NS)

S&E of fresh air fan 10" sweep propeller type complete with impeller, PVC louvers with moving chanel, totally enclosed motor with class-B insulation dynamically balanced blades suitable for operation on 220/240 volts single phase 50 cycles AC supply. including making connections & cost of petty material. As approved and desired by the Engineer in charge at site(NS)

Supply & erection of MS Junction box Size 12"x6"x4" made of MS sheet 16 SWG duly painted, covered with bakelite sheet 3mm thick with help of brass screws and complete in all respects as desired by Engineer-in-charge.(NS)

XLPE INSULATED ARMOURED CABLES (ON SURFACE):(CSR-34.10E)

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-

ii) Overall size 10sqmm (2 Core) Armoured (On-Surface)

xxxvi) Overall size 10sqmm (4 Core) Armoured (On-Surface)

xxxvii)Overall size 16sqmm (4 Core) armoured (On-Surface)

xxxviii)Overall size 25sqmm (4 Core) Armoured (On-Surface)

xii)Overall size 70sqmm (4 Core) Armoured (On-Surface)

xivii)Overall size 300sqmm (4 Core) Armoured (On-Surface)

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

Supply & erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:-(CSR-34.34A)

i) Double Walled Corrugated HDPE Pipe 50/38mm (Outer/ Inner dia.)

vii) Double Walled Corrugated HDPE Pipe 200/170mm (Outer/ Inner dia.)

Supply and erection of LED Flood light fitting 120W made of pressure die cast aluminium, toughened glass and high power LEDs with IP 66 Protection complete in all respects Crompton (TFS-504-120-57-NL-SL-GL-NSG) or equivalent model of Philips/ Wipro/Havells as approved by the E.I.C, for use on 240 volts single-phase 50 Hz AC supply. The fitting to be mounted on existing gate pillars/ pole/wall as required including cost of petty material and making connections.(NS)

Supply & Laying of Copper pipes (set of suction & liquid tubes) for Split Airconditioner of 1.5/2 ton capacity from outdoor unit to indoor unit complete with insulation sleeves, elbows, nipples etc.as required at site.(NS)

Supply & Laying of PVC rigid drain pipe size 25mm dia complete with sockets, nipples, elbows, tees etc. as required at site connected with help of solvant solution and complete in all respects. (NS)

Supply & Laying of PVC insulated 4 core cable size 2.5 sqmm ISI marked from outdoor unit to indoor unit of split Airconditioner.(NS)

RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):(CSR-34.01)

ix)Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp (2Module) covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface)

Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height.

Supply & Installation of Electric Panel fabricated with 14/16 guage CRCA sheet, dust and vermin proof, Indoor type, with hinged lockable doors, mounted on MS angle iron base frame, suitable for 415 volts, 3 phase 4 wire 50Hz AC supply with cable alley and lockable Aluminium bus-bars (300 Amp.), duly powder coated as per approved shade after proper sheet treatment. It shall be complete with Colour Coded PVC Heat Shrinkable Sleeves, DMC bus bar support insulators, hardware and accessories, PVC wires, Ferrule searth bus, inter connections, labeling electrical interlocking as per specifications and drawings, suitable for termination of cables as per single line diagram. The internal control wiring shall be fuseless. Incoming feeders shall be provided with Digital MF meters, phase indicating LED lamps, complete in all respects as desired by the Engineer-in-charge. The panel is to be installed on floor as per site requirement. The panel shall be suitable for fixing of following switchgears:-

Incomer (D.G. Supply)

MCCB 630A 4P 36KA TMR With O/L & S/C Protection =1 Nos

Spreader Terminal MCCB 630A 4P=2 Nos

Extended Rotary Handle=1 Nos

Digital Multifunctional Meter CL1.0, DM6100=1 Nos

Current Transformer 600/5A CL.1.0,5VA=3 Nos

C.T. Shorting Link=6 Nos

Phase Indication LampsLed Type Red/ Yellow=2 Nos

Phase Indication LampsLed Type Blue=1 Nos

Control MCB 6A SP 10KA=3 Nos

Neutral Link=1 Nos

Outgoing

MCCB 100A 4P 25KA TMR With O/L & S/C Protection=6 Nos

Spreader Terminal MCCB 100A 4P=12Nos

Extended Rotary Handle=6 Nos

Outgoing

MCCB 63A 4P 25KA TMR With O/L & S/C Protection=3 Nos

Spreader Terminal MCCB 63A 4P=6 Nos

Extended Rotary Handle=3 Nos

Outgoing For AHU

MCCB 200A 4P 25KA TMR With O/L & S/C Protection=2 Nos

Spreader Terminal MCCB 200A 4P=4 Nos

Extended Rotary Handle=2 Nos

Outgoing For Audio Load

MCCB 100A 4P 25KA TMR With O/L & S/C Protection=1 Nos

Spreader Terminal MCCB 100A 4P=2 Nos

Extended Rotary Handle=1 Nos

Outgoing For Video Load

MCCB 100A 4P 25KA TMR With O/L & S/C Protection=1 Nos

Spreader Terminal MCCB 100A 4P=2 Nos

Extended Rotary Handle=1 Nos

Outgoing Spare

MCCB 100A 4P 25KA TMR With O/L & S/C Protection=2 Nos

Spreader Terminal MCCB 100A 4P=4 Nos

Extended Rotary Handle=2 Nos

Incomer (PSPCL Supply)

Manual Changeover Switch 125A 4P Onload Type=1Nos

MCCB 125A 4P 25KA TMR With O/L & S/C Protection=1 Nos

Spreader Terminal MCCB 125A 4P=2 Nos

Extended Rotary Handle=1 Nos

Digital Multifunctional Meter CL1.0, DM6100=1 Nos

Current Transformer 150/5A CL.1.0,5VA=3 Nos

C.T. Shorting Link=6 Nos

Phase Indication LampsLed Type Red/ Yellow=2 Nos

Phase Indication LampsLed Type Blue=1 Nos

Control MCB 6A SP 10KA=3 Nos

Neutral Link=1 Nos

Outgoing

MCCB 63A 4P 25KA TMR With O/L & S/C Protection=3 Nos

Spreader Terminal MCCB 63A 4P=6 Nos

Extended Rotary Handle=3Nos

MCCB 40A 4P 25KA TMR With O/L & S/C Protection=6 Nos

Spreader Terminal MCCB 40A 4P=12 Nos

Extended Rotary Handle=12 Nos

(Complete As Above) (NS)

CABLE TRAY:(CSR-34.25)

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge & as per PWD General Specifications:-

i)Cable Tray Size 150mm x 50mm x 50mm (2mm thick)

iii)Cable Tray Size 450mm x 50mm x 50mm (2mm thick)

Supply & erection of LED Foot Light 3Watt, Compact Make including making connections and all petty materials, complete in all respects as approved and desired by the Engineer-in-charge at Site.(NS)

Supply & erection of LED Flexi Neon Profile 16mm x 16mm Flat Top Light Compact Make including cost of LED Driver 5 Amp 60watt for every 5 mtr length making connections and all petty materials ,complete in all respects as approved and desired by the Engineer-in-charge at Site.(NS)

Supply & erection of wall mounting fans 400mm sweep Crompton make, Hi Flo Neo or equivalent of equivalent of Usha/Almonard/ Havell's/Ortem with class B insulation dynamically balanced blades suitable for operation on 220/240 volts single phase 50 cycles AC supply including connections with petty material. (NS)

Supply & erection of wall mounting fans 600mm sweep, with class B insulation dynamically balanced blades suitable for operation on 220/240volts single phase 50cycles AC supply including connections with petty material and as approved by the Engineer-in-charge at site.(NS)

Lightning Conductor

Supply Instalation testing & commissioning of Advance Lightning Protection System Lightning Arrestor - ESELA 1.5 ESE Lightning Arrester- Model 1.5 An advance non-electronics lightning protection system ESE Air Terminal as per standard NF C 17-102 leve -4. It shall work on Advanced Early Steamer Emission (ESE) principle and generation of streamer is through corona effect. It shall be made of Stainless steel central capture head of 316L.The system should be so designed to be capable of protecting against direct lightning point as well as conducting/diverting it to earth completely after tracing the lighting in advance. also include necessary accessories. Radius of protection- 107mtr top of the Building (NS)

Supply of GIMA5.0 5 meter GI Mast with Guying & all connecting accessories, for mounting of ESE Lightning Arrester.(NS)

Supply Instalation testing & commissioning of Lightning Strike Recorder (LSC-7) 7-Digit Ligtning strike counter non-resettable type to record the lightning current.(NS)

Supply & erection of Chemical low resistance and maintain Earthing Electrode (Growth make) Copper Bonded Rod (Follow UL spects 250-300 micron 99% Electrolyte copper) 17.2mm dia & 3 Mtr. System should be corrosion resistance and rated for high fault current with hold temperature not less than 700 degree celcius along with 50kg Ground Resistance Improvement Powder (Back Fill Compound). Set of 3 earthings(NS)

Providing Test Link with Poly-Carbonate box of suitable size, with IP 55 & copper bus bars as required.(NS)

PVC INSULATED FR COPPER CONDUCTOR CABLES:(CSR-34.09)

Supply & erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

xi)Overall size 70sqmm (Un-sheathed)

Audio System

Supply, Installation, Testing and Comminssioning of loudspeaker system delivers a frequency range of 34 Hz to 20 kHz (-10 dB) and a frequency response of 40 Hz to 20 kHz (±3 dB), offering a 90° x 50° rotatable coverage pattern with a Directivity Factor (Q) of 11.0 and a Directivity Index (DI) of 10.4 dB. It supports both bi-amp and passive crossover modes, with a passive crossover frequency of 1.2 kHz. The transducer power ratings (AES) are 1000 W (4000 W peak) for 2 hours for the LF driver and 100 W (400 W peak) for 2 hours for the HF driver, while the long-term system power rating (IEC) in passive mode is 600 W (2400 W peak) for 100 hours. Maximum SPL in bi-amp mode is 128 dB-SPL continuous average (134 dB peak) for the LF and 133 dB-SPL continuous average (139 dB peak) for the HF, with passive mode achieving 124 dB-SPL continuous average (130 dB peak). The system sensitivity in passive mode is 96 dB SPL (1W @ 1m). Its transducers include a 15-inch Differential Drive low- frequency driver with an 8-ohm nominal impedance and 98 dB SPL sensitivity, and a 1.5-inch exit compression high- frequency driver with an 8-ohm nominal impedance and 113 dB SPL sensitivity.

Supply, Installation, Testing and Comminssioning of OEM supplied Array Frame for Line Array Speakers.

Supply, Installation, Testing and Commissioning of subwoofer system offers a low-frequency range of 28 Hz to 1 kHz (-10 dB) and a frequency response of 35 Hz to 1 kHz (±3 dB). It provides flexible input modes, allowing for drivers to be run in parallel or discretely. The transducer power rating (AES) is a robust 2400 W (9600 W peak) for 2 hours, with a long-term system power rating of 1600 W (6400 W peak) for 100 hours. This system can achieve a maximum SPL of 136 dB-SPL continuous average (142 dB peak) across both the 30 Hz – 100 Hz and 100 Hz – 500 Hz ranges. Its system sensitivity is 102 dB-SPL (1W @ 1m) in both of these ranges. Nominal impedance is 4 ohms when operating in parallel-drive mode, or 2 x 8 ohms in discrete-drive mode.

Supply, Installation, Testing & Commissioning of loudspeaker system boasts a wide frequency range of 52 Hz to 20 kHz (-10 dB) and a balanced frequency response of 63 Hz to 19 kHz (+/-3 dB). It offers a horizontal coverage of 120° and a vertical coverage of 60°, with a directivity factor (Q) of 7 and a directivity index (DI) of 8 dB, both averaged between 500 Hz and 16 kHz. The system delivers a sensitivity of 92 SPL dB/1W/1m and a rated maximum SPL of 116 dB at 1 meter, operating at a nominal impedance of 8 Ohms. Its long-term power rating is 250 W continuous, 500 W program, and 1000 W peak, with an AES standard power rating of 375 W. The internal crossover is set at 1.6 kHz. Audio reproduction is handled by a single 205 mm (8 in) SFG™ low-frequency driver featuring a 64 mm (2.5 in) edge wound voice coil, and a single 2408H-1 25 mm (1 in) exit compression high-frequency driver with a 38 mm (1.5 in) voice coil.

Supply, Installation, Testing & Commissioning of 2-Way Full-Range Loudspeaker with a frequency range of 74 Hz to 20 kHz (-10 dB) and a frequency response of 100 Hz to 20 kHz (±3 dB). It handles a power capacity of 60W Continuous Program Power and 30W Continuous Pink Noise at low impedance. With a nominal sensitivity of 87 dB, it provides 120° conical coverage, exhibiting a Directivity Factor (Q) of 7.6 and a Directivity Index (DI) of 8.1 dB. The system can achieve a rated maximum SPL of 102 dB at 1 meter average and 108 dB peak, with a nominal impedance of 8 ohms in the direct/bypass 8Ω setting.

Supply, Installation, Testing & Commissioning This loudspeaker offers a frequency range of 74 Hz to 20 kHz (-10 dB) and a frequency response of 100 Hz to 20 kHz (±3 dB). It handles a power capacity of 60W Continuous Program Power and 30W Continuous Pink Noise at low impedance. With a nominal sensitivity of 87 dB, it provides 120° conical coverage, exhibiting a Directivity Factor (Q) of 7.6 and a Directivity Index (DI) of 8.1 dB. The system can achieve a rated maximum SPL of 102 dB at 1 meter average and 108 dB peak, with a nominal impedance of 8 ohms in the direct/bypass 8Ω setting.

Supply, Installation, Testing & Commissioning of 4-Channel Class D/TD Power Amplifier, Built in LAKE or better DSP, Dante Digital Audio networking and advanced system integrity monitoring delivering rms power of 3000 W @ 4 Ohms per channel, 1900 W @ 8 ohms per channel, bridge Output 4600 watts @ 4 ohms and 2300 watts @ 8 ohms. Frequency Response 15 Hz- 25 kHz, Peak output Voltage 194V, THD 20Hz- 20kHz at 1 W <0.05%, Dynamic Range / S/N ratio >110 dB, Built in or External 8x8 dante I/O

Supply, Installation, Testing & Commissioning of 4-Channel Class D/TD Power Amplifier,Built in LAKE or better DSP, Dante Digital Audio networking and advanced system integrity monitoring delivering 1000 W @ 4 Ohms and 8 ohms per channel, bridge Output 1750 watts @ 4 ohms. Frequency Response 15 Hz- 25 kHz, Peak output Voltage 145V, THD 20Hz-20kHz at 1 W <0.05%, Dynamic Range / S/N ratio >110 dB, Built in or External 8x8 dante I/O (In case OEM is quoting different channel amplfiier configutaion in that case they have to quote multiple Qtys. against tender qty to match the minimum power requirements per Channel)

Supply, Installation, Testing & Commissioning of 2-Channel Professional power amplifier with Integrated DSP delivering 1200 W @ 4 Ohms, 600 W @ 8 Ohms,THD + N 20 Hz- 20 kHz for 1 W <0.01%, Signal-to-Noise ratio >102 dBA, Channel separation at 1 kHz >80 dB, Frequency Response 15 Hz- 25 kHz,Common Mode Rejection 50 dB, Networked control, Link outputs on XLR for inputs, AES connectivity

Supply, Installation, Testing & Commissioning of 4-Channel 500W Class D Energy Efficient Power Amplifier delivering 4 x 125 W per channel at 70 V, 4, 8 and 16 ohms,THD 20 Hz - 20 kHz at 1W <0.1%,Signal to Noise Ratio >112 dBA,Frequency Response 15 Hz - 25 kHz,CMR 50 dB

Supply, Installation, Testing & Commissioning of 32-channel analog mixing console for live sound applications, 24 mono inputs and 4 stereo inputs, Microphone Preamps: Top-quality microphone preamps, Channel EQ: Mid-sweep 3-band EQ for mono channels, 4-band EQ for stereo channels, Multi-bus Configuration: A total of 14 buses, Built-in Effects: Dual SPX effect processors, Talkback Function facilitate communication, Adjustable inputgain from -60dB to +10dB for microphones and -34dB to +10dB for line inputs, Channel Peak Indicators: Provide visual feedback for level matching, Versatile Inputs: Balanced XLR and phone jacks for mono inputs, phone and RCA pin jacks for stereo inputs, Total Harmonic Distortion: Less than 0.1%, Frequency Response: 0, +1.0, -3dB 20Hz-20kHz, Hum & Noise Level: Equivalent input noise is -128dBu, residual output noise is -99dBu, Crosstalk: -70dB, Power Requirements: Dependent on the area of purchase (AC100V, 120V, or 220-240V), Power Consumption: 120W

Supply, Installation, Testing & Commissioning of device features twelve analog inputs, each equipped with 48V phantom power, and nine analog outputs. It offers configurable signal processing with a rich palette of processing and logic objects. A 48-channel, low-latency, fault-tolerant digital audio bus ensures reliable audio transfer. The unit also includes clear front panel LED indication and bi-directional locate functionality. For external control and integration, it provides 12 control inputs and 6 logic outputs for GPIO.

Supply, Installation, Testing & Commissioning of Gooseneck Microphone, Transducer type: Electret condenser, Polar pattern: Cardioid, Frequency response: 50 - 19,000 Hz, Open circuit voltage:17 mV/Pa, Nominal impedance: < 200 Ω, Load impedance: ≥1 kΩ, Size 400 mm (15"-16"), 3 pin XLR Type alongwith Shock Mount etc. all complete.

Supply, Installation, Testing & Commissioning of UHF wireless handheld microphone with True diversity receiver (UHF),16 Channel Preset per band, Display on Transmitter and Receiver , RF Power output 50mW or Better , Polar Pattern :- Cardiod , Carrier frequency range 500Mhz to 865Mhz , Frequency response 20Hz to 20Khz , Mute Button on Transmitter , Battery Operation time Minimum 8hr , Should have Charging Contact in Transmitter , Receiver dynamic range 100 dB (A-weighted) Or better , switching bandwidth Minimum 40Mhz Or better.

Supply of Wired Vocal Microphone, Transducer type Dynamic Polar pattern Supercardioid Frequency response: 30 - 18,000 Hz Nominal impedance 600 Ω Connection 3-pin XLR male etc. all complete.

Supply, Installation, Testing & Commissioning of Instrumnet Microphone with high- frequency reproduction Polar Pattern: Cardioid, Frequency response : 50- 17,000 Hz, Open circuit voltage : 2.4 mV/Pa, Nominal impedance : 600 Ω, Load impedance : ≥ 2 kΩ, Connection : 3-pin XLR tc. complete with installation as per the site requirement.

Switching

SITC of 3x1 Wallplate Transmitter Switcher, Supports HDMI signal up to 4K@60H z 4:4:4, USB C signal up to 4K@ 3 0Hz 4:4:4, Supports HDMI V2.0 standard and HDCP 2.2 compliant, Ensures display of content protected media and interoperability with other HDCP compliant devices, Active input automatic detective, Extending HDMI signal 4K@60Hz up to 131ft/40m and 1080p@60Hz up to 229ft/70m, USB C supports video and USB data transmission, Supports RS232 control with HDBaseT connection and local control, Supports bidirectional IR pass through to control display device from local and control source device from remote, Supports CEC to turn on/off display by the DISPLAY ON/OFF button, and the button can be programmed by IR learning feature or RS232 command, Supports bi directional 24 V PoC power supply and wide voltage power receiving (12~48V), only one power adapter, Supports USB 2.0 KVM solutions, Micro USB port for firmware upgrade.

SITC of is a point-to-point HDMI extender set for HDMI V2.0 and IR signals, this kit supports 4K/UHD video @ 60Hz with 4:4:4 Chroma sampling, as well as HDMI data rates up to 18Gbps and HDCP 2.2 compliant. It provides HDMI transmission up to 230 feet (70 meters) for 4K@60Hz 4:4: 4, or 262 feet (80 meters) for 1080p over single CAT5e/6 cable. It supports bi-directional IR, RS232 and 12V PoC, and automatic video resolution down-scaling.

SITC of 4x4 HDMI 2.0 Matrix Switcher. Supports 4K/60 4:4:4, HDR, HDCP2.3 compliant. Audio Matrix, audio out can de-embedded from arbitrary input or output. Individual volume adjustment on each L+R output. Supports 4K to 1080p down-scaling up to 2 outputs. HDMI out provides 2.5W to power Active Optical Cable (AoC). HDMI Output support up to 5V500mA for AoC cable Controllable by front panel, IR, RS232 and TCP/IP.

Video System

Supply, Installation, Testing and Comminssioning of 9800 lumen DuraCore laser professional short-Throw projector with fixed lens, features a dust-resistant IP5X certified optical engine for 24/7 operation capabilities, offering true maintenance-free projection for up to 30,000 hours. built-in dual 10W speakers. Screen Size 24 ft x 15 ft inch from throw distance of 20 ft

Supply, Installation, Testing and Comminssioning of Cyclorama screen of suitable size as per site requirements Weight: 400 g/m2 Width: 1.40 m, 2.20 m and 2.40 m Flame Retardancy: CLASS 1 Composition: PVC Colours: Rear White, Front White, Perforated White, Grey, Black, Blue and Translucent.

Supply, Installation, Testing and Comminssioning of Cyclorama Frame is a dual frame structure made from GI pipes in welded self-supporting construction. This frame is grouted with rear wall and stage floor. The frame is strengthened from the ceiling where supports are available.

Cables & Connectors

Supply, Installation, Testing and Comminssioning of 24U Equipment rack with standard accessories

SITC of 12 U Equipment Rack with accessories.

Supply , Laying , Testing & Commissioning of Microphone Cable 23/0.76 ATC PVC Sheathed

Supply , Laying , Testing & Commissioning of Speaker Cable, 2 Core 2.5 Sqmm stranded ETP high-conductivity copper conductors, PVC insulation, parallel: (1) tinned, (1) bare etc. complete with installation as per the site requirement.

Supply , Laying , Testing & Commissioning of Speaker Cable, 2 Core 4 Sqmm stranded ETP high-conductivity copper conductors, PVC insulation, parallel: (1) tinned, (1) bare etc. complete with installation as per the site requirement.

Supply , Laying , Testing & Commissioning of 16 pair snake cable Complete as per site.

Supply , Laying , Testing & Commissioning of 18Gbpss HDMI Cable (1.3 to 1.8 Mtr)

Supply , Laying , Testing & Commissioning of 18Gbpss HDMI Cable (5 mtr)

Supply , Laying , Testing & Commissioning of 6-feet high speed USB A-B cable.

Supply , Laying , Testing & Commissioning of CAT6 cable constructed with four twisted pairs of 23AWG annealed copper conductors, each with an outer diameter of 0.56 ± 0.01mm. The insulation for these conductors is made of Skin/Foam/Skin HDPE and has an outer diameter of 1.33 ± 0.10mm, with colors conforming to TIA/EIA 568-B. For screening, each pair is individually shielded with Alu/PET (aluminum side out), and a tinned copper drain wire with an outer diameter of 0.4 ± 0.01mm is included. The outer jacket is made of LSHF (Low Smoke Halogen Free) material, is typically blue (RAL5012), has a minimum thickness of 0.5mm, and an overall diameter of 7.2 ± 0.2mm..complete with installation as per the site requirement.

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. Make:- L&T/

Supplying and drawing 1 x 1.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Make:- L&T/ Havells/Polycab/ Finolex

SITC of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 7cx1.5 sq mm.

SITC of FRLS Copper unarmoured Flexible cable IS694 having 3 Core each of 1.5 Sq mm size.

SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal.

SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections.

SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing .

Fire Alarming Panel

SITC of Two Loop Panel Microprocessor based Intelligent Addressable Main Fire Alarm Control Panel should be compatable for CPU redundancy with suitable Loops modules and each loop capable of supporting not less than 250 devices (detectors & modules should be in any combination) ; Loop length up to 1.5 km, 7" Color LCD touch screen display with bright colors to indicate alarms and events, 4 Nos of Integrated Ethernet Ports & 2 Nos of RS 485 for networking, 200 Nos of Soft programmable keys with status indicators for individual triggering of NAC Ouputs, evacuation speaker zones, AHU Modules, Damper switch, Smoke extraction Fans, Lifts.. etc. The Panel shall support 10000 history logs in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 24 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have seamless integration with EVAC certified Public Address System and shall be complete with all accessories. Shall be EN54-VDS/UL-FM Certification

SITC of linear beam detector of distance 5 Mtr to 50 Mtrs , reflective prism allows for the accurate detection of smoke particles within the given distance range, Alignment method: Laser assisted, Auto-Alignment and Manual alignment. Standalone product with integrated Control System, Auxiliary current (mA) 4.5 mA – 5.5 mA, Auxiliary current - Alignment modes (mA) 31 mA - 35 mA, Operating voltage (VDC) 14 VDC – 36 VDC, Operating temperature (°C) -20 °C – 55 °C, Storage temperature (°C) -40 °C – 85 °C, Weather rating (IEC 60529) IP55, LED color Red; Yellow; Green, Shall be EN54-VDS/UL-FM Certification

Supply, Installation, Testing and Commissioning of addressable multisensor smoke detector including mounting base with LED… etc. complete as required with 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements; Drift Compensation feature & Automatic addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values.Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. will be VDS Certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector).Shall be EN54-VDS/UL-FM Certification

SITC of Addressable Control Relay Module with inbuilt isolators as per NFPA 72 style 7 wiring requirements .Relay Control module shall be used for emergency control functions including shutting down Fire dampers in AHU's, tripping of AHU's, Fresh air fans, Ventilation fans, tripping of Access control doorsetc.Shall be EN54-VDS/UL-FM Certification

SITC of Addessable Manual break glass unit ( Double action) with inbuilt isolators as per NFPA 72 style 7 wiring requirements, with flexible network structures & necessary fixing arrangements with key complete as required. Shall be EN54-VDS/UL-FM Certification

SITC of fire exit sign board illuminated made from etched sheet with LED illumination and all electrical accessories included battery and battery charge etc. on ceiling/ wall mounted.

EPABX System

SITC of minimum 1 P&T lines 8 outgoing telephone lines EPABX System alongwith wall hanging telephone set, 20 pair distribution frame with Krone module,2 and 5 Pair 0.5 mm telephone wire along with required accessories and complete in all respect as per engineer.

Stage Lightening

Supply of LED COB par 200W Flicker free Built-in programs LED Light Source: 1pcs 200-watt COB LED lamp (WW/CW) Lamp average life time: 50,000 hours DMX Channel: 2 channels Control Mode: Auto, Master/Slave, DMX512, software (connect to computer), sound control Dimmer: 100% linearly adjustable Strobe: 0~25F.P. S Voltage: AC100-240V 50/60Hz Working Environment: indoor -20°C- 40°C IP Rating: IP20 Dimensions: 300x220x320 mm

Supply of LED Blinder 400w 4PCS 100W WARM WHITE LEDs 4, 8 DMX CHANNELS END TO END CAPABILITY DIGITAL DISPLAY ADJUSTABLE ANGLE DIMMER: 0-100% LINEARLY ADJUSTABLE IP RATING: IP20

Supply of LED PAR: 54x3WLight source: 54PCS 3W LEDs (R12 G14 B14 W14) TX ultra-bright LED’S Lens angle: 15º, 25º Channel mode: 8 DMX channel mode Function: colour mix, automatic colour change, built-in program and strobe effect with adjustable speed Sound controlled via built-in microphone Adjustable sound sensitivity LED Display, easy to control Control: auto, sound active, DMX512, software (connect to computer) Power: 180W IP rating: IP20

Supply of LED profile 200W , Voltage: AC100-230V Luminous: LED3200K/5600K Max Ambient Temperature: <40℃ Max Surface Temperature: <85℃ Net Weight: 8.64KG Gross Weight: 10.5KG Beam angle: 19°/26°/36°/50° Control: DMX512 Light size: 340*270*650MM

Supply of LED Fresnal 200w 200W Original Citizen LED lamp Flicker free LED Light Source: 1pcs 200-watt COB LED (WWICW) CRI: 3200 ≥ 90, 5600 ≥ 90 Lamp average life time: 50,000 hours DMX Channel: 2 channels Control Mode: DMX512, software (connect to computer), manual control Dimmer: 100% linearly adjustable Working Environment: indoor -20 °C- 40 °C

Supply of LED wall washer Control Mode: Auto, Master/Slave, DMX512, software (connect to computer), sound control Dimmer: 100% linearly adjustable Working Environment: indoor -20°C- 40 °CDMX Channel: 4, 6, 7, 9, 3 channel Lamp average lifetime: 50,000 hours LED Light Source: 18pcs 12-watt 4IN1 LEDs (RGBW) Voltage: AC90-260V 50/60Hz

SITC of Light fixture mouting clamp Customized for suspending on fixed bars on stage Made up of Aluminium Die casted MS threaded T bolt with yellow passivation finish Complete with black powder coating matt black finish Safe working load 150 KG Suitable to Batten of size 30 OD to 60 OD.

SITC of Motorised Lighting bar of Length 40 feet approx, 3 Phase AC Motor with DC Brake & Gear box with black epoxy polyester powder coated, 40NB, 48mm OD dual barrel dual construction arrangement with 75x6mm MS Flat in every 2 m and with 40x75 Cable trunking with lid, Frill bar attachement, MS fabricated cable retractor made up of CRCA MS Sheet 20SWG 1300mm each length with hinge rod, Specially designed compact 80:1 Worm reduction gear box, B5 Flange, Double Cam type Upper and lower limit controller 5mm, 6x19 GI wire rope preformed for lifting the Light bar, Pile winding type winch with MS circular Plates for rope winding, Safe Working Load 200 kg.

SITC of MS Side Lighting Ladders made up of 40NB MS Pipe with black epoxy polyester powder coated of Size 2400 x 600 mm.

SITC of High quality power junction box 2 and 4 way made up of MS Sheet metal fabricated housing. Snap fit fixing /15 (1.5mm ) Total Max Rating 10A, 250V A.C 20˚C to +70˚C Operating Temp Moldings: Nylon, Flammability Rating UL94V-0 Black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. Clamp arrangement for fixing or Raul plug arrangement for wall / floor fixing.

SITC of DMX Signal IN Junction box fitted with 5 pin DMX Male and Female socket and DMX Signal OUT Junction box fitted with 5 pin DMX female socket.

Supply DMX SPLITTER of Voltage: 100-220V,50/60hz Power: 4W Dimensions: 540x230x100mm Weight: 3.68kgs Opto- isolated DMX output ports 3pin XLR inputs & outputs, 10 isolated outputs DMX loop through port with inbuilt termination, Universal power supply

Supply of Light Controller Computer Light Controller,Voltage 100 to 240 V Frequency 50/60 Hz Mating number of Fixtures 96 The Number of Scenes That Can be Saved 60 The Number of Scenes That Can Run Simultaneously 10 The Total Number of Steps in a Multi Step Scenario 600 Scene Time Control Fade In, Fade Out LTP Sliding Graphics Can be Stored for Each Scene 5 Fader Scenes/Dimming Size 485 x 420 x 105 cmProduct Description Leveraging the skills of our qualified team of professionals, we are instrumental in offering a wide range of Mini Pearl 1024 Lighting Controller.

Stage Crafting

SITC of Main Curved Valance Bar of required length 22-24 Mtrs made using 40NB, 2mm Thickness duly painted and rust free in black matt texture finish with suitable hanging arrangements.

SITC of main curved motorised curtain control system of 22 Mtrs with horizontal sliding arrangement complete with fixing, Rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pulleys 3-mm steel wire rope, 1HP motor(Compton) 2nos. Air breaker contactors (L&T) 2nos., micro switches for auto stop, 3nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed.

SITC of Rear motorised curtain control system of 11 Mtrs with horizontal sliding arrangement complete with fixing, Rails, brackets, sliding arrangement & motorised operation complete with runners, master runners, pulleys 3-mm steel wire rope, 1HP motor(Compton) 2nos. Air breaker contactors (L&T) 2nos., micro switches for auto stop, 3nos push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed

SITC of MS, Wing frame made out of 25X25mm or higher size made of MS square pipe with 2mm in thickness undergone through various chemical treatment to keep them rust free and BLACK PAINT finish with Below Specifications: • Wing Frame Size 6 x 2 Mtr

SITC of Stage hoisting and curtain Control system Panel, comprising of Electrical Contractor and protection MCB’s for dual control of main, center, Rear Set Bars motor, Controls for movement of Light Bars. Panel should have incoming protection 4 pole MCB, phase indicating pilot lights, etc. It is to be fabricated from 1.6mm sheet steel, wall mounting type, 1.5mm 7core wire from top and/ or bottom etc. Complete with Remote Control options from Stage as well as Control Center.

SITC of Main Valance Fire retardant velvette fabric of 100% gathering as per the approved design and colour, not less than 300 GSM, duly stitched along with eyelets of Size 25 Mtr.

SITC of Fire retardant main curtain velvette fabric with lining 100% gathering as per the approved design and colour, not less than 300 GSM, duly stitched along with eyelets of size 25mtrs

SITC of Rear curtain fire retardant cotton fabric 50% gathering for as per the approved design and colour, not less than 250 GSM, duly stitched along with eyelets Size : 12 x 6 Meter

SITC of frills of fire retardant cotton fabric 50% gathering for as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets Size : 12 x 1.3 Meter

SITC of Fire retardant wing cotton fabric with 0% gathering for as per the approved patern and colour, not less than 250 GSM, duly stitched along with eyelets.