44/E.U.D.C.-Talkatora/2024-25

Amount

Removing of Top Cover Plate by opening of Bolt and nuts of T/F and other internal connection of T/F required for repairing safely and reconnect it after appropriately after Minor repairing work of Medium Power Distribution Transformer(l l/O.4 KV) installed at various site for Stopping Oil leakage from T/F and other work as per site requirement & site conditions. Firm has to make arrangement for draining and refilling of T/F Oil, if required for carrying out the work.

250/400 KVA T/F

630/1000 KVA T/F

Toping Up/Filling of Reclaimed T/F Oil in T/F's

T/F Oil in following capacity of T/F's up to 2/3rd level of conservator Tank for Distribution T/F having less Oil as per Indent placed for repairing by JE/SDO. Filling up of these T/F by Reclaimed T/F Oil upto required level and carriage of reclaimed T/F Oil, T/F drums from concerned store/site including safe loading and unloading at both ends. Complete in all respect as per site requirement (Reclaimed T/F Oil will be provided by the concerned JE(D) ( Required Vehicle & suitable Container for storage of Reclaimed T/F Oil will be arranged by the Contractor at his own cost.)

Replacement of Old and Damaged H.T Bushing rod including Oil Seal/Gaskitsetc of all capacity of Distribution DTs

Removal of Old and damaged H.T Bushing Rod from T/F and fixing of suitable size new H.T Busing rod made of Brass with all nuts and bolts etc. including replacement of all old/damaged Neoprene Oil seal/Gasket set by fixing suitable size New Neoprene Oil Seal/Gasket Set & as per site requirement, Complete Job in all respect. (All material will be provided by the Contractor)

Replacement of Old and Damaged L.T Bushing rod including Oil Seal/Gaskitsetc as required. Removal of Old and damaged L.T Busing Rod from T/F and fixing of suitable size new L.T

Busing rod made of Brass with all nuts and bolts etc. including replacement of old/damaged Neoprene Oil seal/Gasket set by fixing suitable size New Neoprene Oil Seal/Gasket Set & as per site requirement, Complete Job in all respect. (All material will be provided by the contractor)

Stopping Oil leakage from T/F H.T/LT Bushing side.

Stopping of Oil leakage from T/F L.T/H.T Side Bushing. Removing of damaged oil Seal/Gasket Set/Cork sheet and fixing of suitable size new Neoprene Oil seal/Gasket set/Cork sheet as required and tightening of H.T/LT bushing rod Complete Job in all respect. (All material will be provided by the contractor)

Replacement of Old and Damaged Suitable capacity of Aluminum Lugs (All Material will be provided by Contractor).

Fixing of suitable capacity of lugs after removing old and damaged lugs from various capacity of PVC cable with using crimping tools.

Supply & Fixing of damage spare parts of LT fuse unit

Copper strip of size 1000x50x6 mm

Copper U-Type spring contact 500 Amp

Copper U-Type spring contact 300 Amp

Copper back entry with coupling & chuck nut 500 Amp

Copper back entry with coupling & chuck nut 300 Amp

Porcelain 500 Amp. O/G type with caller suitable for Henely type tailles fuse unit.

Porcelain 300 Amp. O/G type with caller suitable for Henely type tailles fuse unit.

Copper L-Piece for 250/400 KVA T/F

Copper L-Piece for 630 KVA T/F

Copper L-Piece for 1000 KVA T/F

Repair and Maintenance of Old and Damaged Transformer Earthing

Repairing of T/F earthing strip if found rusted/damage will be replace by new 50x6 mm GI strip & duly welded to existing earthing rod/pipe (All Material will be provided by Contactor).

Maintenance & Repairing of Damage T/F Plinth

Plinth by Using Bricks,ballast or sand and Cement. (All Material will be provided by Contactor).

Maintenance & Repairing of Damage LT Distribution Box Plinth

Plinth by Using Bricks,ballast or sand and Cement. (All Material will be provided by Contactor.

SMC LT Distribution Pillar Box with One Incomer and 3 sets of 300 Amps rewritable type fuse unit for outgoing circuits complete, connected on 800A bus bar.

Installation of silica gel breather wherever required.

160/250/400 KVA - 250gram.

630/800/990/1000 KVA - 500 gram.

Note :- 1- All the material provided by contractor shall be as per norms of UPPCL/RESPO. 2- One carriage including loading/unloading from dump site to pit site is included in scope of work. 3- During execution of work all risk will be of the contractor. 4- Contractor will provide all T & P, vehicle and man power. 5- All the old and used material should be taken on book. 6- The quantity may be vary ±10%. 7- GST will be paid extra as legally applicable. 8-The work shall be carried out under O & M Budget 2025-26. 9-The work will be done as per norms of UPPCL/RESPO.

R.D. ENTERPRISES (BID ID -5097907)

M/S S.K. CONTRACTOR AND SUPPLIER (BID ID -5097390)