Nagar Panchayat Mursan Nikat Balmiki Basti Talab ka Sondariyakaran ka Karya

DESCRIPTION OF WORK :-

Dewatering funeel by pumping out water collected by natual drainage inside tunnel including dewatering in tunnal by pumping out water collected by natural drainage inside tunnel including providing sump where necessary cost of all materials, machinery, labour, drainage and all other ancillary operations etc. complete.

Excavation and removal or earth including lift upto 1.5m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge upto a distance of 30m from the foundation trenches by Hydraulic excavator/manual means.

Disposal of surplus excavated earth rubbish, malba etc. by mechanical transport complete as per direction of E/I upto any lead and lift Ch. Item No. 10

Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30m from the foundation trenches by Hydraulic excavator/manual means Sl. No. 254

Excavating, supplying and filling of local earth by mechanical transport upto a lead upto 5km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, side of foundation etc. complete.

Cement concrete in 1:4:8 (One Cement, Four Coarse sand & eight graded stone aggregate 40mm nominal size) and curing complete. Including cost of form work in foundation. Sl. No. 275 (a)

Providing and laying in position specified grade of reinforced cement concrete including the cost of centering shuttering finishing and excluding reinforement (a) 1:1½:3 (One cement, One and half coarse sand : Three graded stone aggregate 20mm nominal size) Sl. No. 6 DSR No. 5.1.2

Supplying, fitting and placing HYSD bar Reinforcement (Fe 415) in substructure complete as per drawings and technical specification clause 1002, 1005, 1010 & 1202

Brick work with common burnt day F.P.S. (non modular) bricks of class designation - 100 in foundation and plinth in Cement mortar 1:4 (1 Cement : 4 Coarse sand) as per SOR Ch. 6 Sr. No. 1 (6.1.1)

12mm thick cement plaster in 1:4 (One Cement & Four Coarse sand) mortar I/C all material, labour, T&P etc. complete.

Providing and laying D.P.C. 40mm thick with cement concrete consisting of 1:1.5:3 (1 Cement : 1.5 Coarse sand : 3 approved 10mm graded stone grit) and including water proofing materials as approved by the Engineer-in-Charge in the proportion as specified by manufacturer.

Providing, laying spreading & compacting of grenular sub base by providing well graded (Gr. 1) materials, speading in uniform layers with motor grader on prepared surface on prepared surface, mixing by mix in placed method with Rotovator at OMC and compacting with in layers with smooth wheeled Vibratory Roller to achieve the desired density, complete as per MORD clause 401.1 & as directed by Engineer Incharge including all machinery, charges & including all labour, T&P etc. required for proper completion of the work.

Laying of 1 shaped precast interlocking tiles of thickness 80mm (Rubber moulded Gray) (Compressive strength not less than 30 Mps and weight 4.50 Kgs) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work.

Providing and fixing/Tree Iron frames for doors, windows and ventilators of mild steel Angle sections of size 35×35×5 mm joints mitred and welded by angle iron 35×35×5mm or 35×5 mm flat places to the existing T-iron frame or to the wall with dash fastner. Including fixing of necessary bult hinges and screws and applying a priming coat of approved steel primer. all complete as per the direction of Engineer-in-charge. As per SOR Ch. 10 Sr. No. 12

Providing and laying pitching on stopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications.

Supply and fixing RCC bench including all material, labour, T&P etc. complete as per requirement of site.

Sand filling in plinth including supply of necessary quantity of sand from any distance at site of work and including watering dressing etc. required for proper completion of work SOR Ch. 4 Sl. No. 255

Construction of Podium with brick work and plaster in 1:4 Cement mortar for enogration with black granite stone 2'×2.5' including engraving of proper language all complete.