Karnataka

Active

Works

Irrigation and Other Works

Providing Irrigation Facility to Sy. No. 305, 256, 314, 245 and 307 through Pipeline in Afzalpur Town in Afzalpur Taluka Kalaburagi District (Under 4702 LIS for 2025-26)

Minor Irrigation Department

Minor Irrigation Division Kalaburagi | KALABURAGI, Karnataka

Amount: ₹1.2 CrCloses: 8 Jul 2026Due today

Tender Value

₹1.2 Cr

EMD Value

₹2 L

Closing Date

8 Jul 2026, 10:59 pmDue today

Tender Inviting Organisation

Name

Minor Irrigation Department

Work Description

Providing Irrigation Facility to Sy. No. 305, 256, 314, 245 and 307 through Pipeline in Afzalpur Town in Afzalpur Taluka Kalaburagi District (Under 4702 LIS for 2025-26)

Tender Information

Tender ID

MI/2026-27/IW/WORK_INDENT11638/CALL-2

Reference Number

MI/2026-27/IW/WORK_INDENT11638/CALL-2

Tender Type

Open

Product Category

Irrigation and Other Works

Location

Minor Irrigation Division Kalaburagi

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredA copy of valid KPWD Class III and above registration certificate of individual bidder should be uploaded

RequiredGST Registration Certificate

RequiredWORK DONE CERTIFICATE FOR SIMILAR NATURE AS PER BID DOCUMENT

RequiredWORK DONE CERTIFICATE QUANTITY WISE AS PER BID DOCUMENT

RequiredANNUAL TURNOVER FOR LAST 5 YEARS WITH UDIN

RequiredBID CAPACITY

RequiredVALID EPF CERTIFICATE WITH LATEST CHALLAN

RequiredLINE OF CREDIT AS PER BID DOCUMENT

RequiredSCANNED LETTER PAD WITH ADDRESS FOR COMMUNICATION

RequiredIT Returns for last five years 2021-22 to 2025-26

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Addendum / Corrigendum will be published in the website for all modifications or corrections if any

Conditional Tenders are liable to be rejected .The Employer reserves the right to reject any or all Tenders without assigning any reason

All relevant documents as per the KW-4 need to be uploaded while submitting bid in general documents provision in KPP Portal

The Employer reserves the right to accept or reject any or all the tenders without assigning any reason whatsoever

The contractor has to make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications or Equivalent and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material / Project, until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning

The Contractor is responsible for the proper maintenance of equipment / material / Project, as well as protection of the same against theft, elements of nature, damages etc while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing

The contractor should furnish the name of the individual/ firm/company with address, telephone number, fax number, e-mail address with place of registration, year of incorporation etc.

The certificates furnished by the bidder shall be got confirmed / verified for its genuineness

The intending Bidders are advised to visit the site of work, make themselves familiar with local situation about the availability of the construction materials, workmen, land required for construction activities etc

If any of the dates mentioned above happens to be a general holiday, the next working day holds good.

All materials of approved quality including steel, cement etc., required for the above work should be procured by the contractor only. No departmental supply of any materials shall be made

Typographical errors, if any, will not be the ground for any claims by the bidder/ firm/company

The agency should establish temporary material testing lab near the work spot with all the required facilities.

The Period of completion is 06 months (including Monsoon).

Disposal of debris / unused excavated stuff including transportation and with all lead & lifts is in the scope of the bidder/ firm/company.

Safety measures, barricading, traffic management, etc. at work sites are in the scope of the bidder/ firm/company

All the cost towards measures to be taken by the bidder/ firm/company for dewatering necessary for the execution of the work is deemed to be included in the bid price.

Creating Documentation of day-to-day activities and submitting the same to the Department regularly, such as Photos/Videos, Progress/Other Reports, Log-books, History Sheets, Inventory Register, Correspondence Files, As-Built Drawings shall be maintained.

The bidder should provide the required safety measures and train all concerned staff in day-to-day operations. The bidder/ firm/company shall comply with all applicable health and safety regulations in all activities of the Scheme. The bidder/ firm/company is responsible for ensuring the health & safety of his personnel.

The bidder shall plan adequately for any accidents to the personnel and all statutory requirements according to the Labour Act shall be provided to the concerned personnel.

Any activity not specifically mentioned herein but deemed to be fairly contingent to the intent and spirit of contracted work as per the Engineer in charge will form part of the responsibility of the Contractor.

The intending bidder should adhere to the latest version of relevant IS standards which are applicable for all designs/execution/testing & commissioning etc. for this works.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders. Royalty shall be deducted as per KMMCR 1994 Amendment rule 2016, Also KMMCR 2016 Amendment Rule 36(3), 42(1), 44(3), 44(4)

The cost of the Tender form shall not be refundable.

As per Karnataka State Govt Order No:LD/300/LET/2006/Bangalore Dt:1-1-2007 and Govt Ltr No:PW/134/BMS/2007, Dt: 27-7-2007, a sum amounting to 1% of the bill amount will be deducted towards Construction Labour Welfare fund.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The tenderer shall furnish required information in all formats. Scan and upload all Formats/Original documents required for this bid to the KPP Portal. The Original Formats/Documents shall be produced at the time of opening of Technical Bid for physical verification.

The tenderer shall submit an affidavit stating that he has not involved in litigation with Government, also he shall state that, amount of existing / ongoing works and amount of works awarded to him and yet to be commenced.

The individual bidders should be Class III and above Contractor registered in Karnataka PWD

The Tenderer has quote his rate by excluding GST. However Contract will be concluded for the amount (Exclusive of GST) but applicable GST will be paid extra prevailing at the time of execution. If the GST Rates are revised during the contract period, the Tenderer/Employer has to accept the revised GST rates for making payment / recovery

Line of Credit should be in prescribed format(In Bankers Letter Head), if not, then the Bid is liable to be rejected

The contractor has to furnish Additional security deposit for unbalance tender as per clause 25.1 of ITT, to an amount equal to difference in contract price and amount put to tender , in addition to 5 % performance guarantee (in any of the form prescribed may be deducted in running bill of the contractors).

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

During the execution of work, if any minor minerals are required contractors have to abide by the Karnataka Minor Mineral Concession Rules 1994 (as amended up to date). As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the Mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If Mineral Dispatch Permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty and DMF contribution as per Karnataka Minor Mineral concession rules 1994 (as amended from time to time) will be deducted from contractors bills at the time of payment.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Satisfactorily completed (at least 90% of the contract value), similar nature of work from a single contract such as LIS of value not less than Rs. 58.63 Lakhs during the last five years (2021-22 to 2025-26). The value of the completed work shall be given a weight of 10% per year to bring them to the price level of FY 2026-27.The work done certificate should be obtained duly Signed from an Officer not below the rank of Executive Engineer of the concerned division

Work Done Certificate

The intending bidder should have executed a minimum Quantity of the following Items as stated below in any one year in during last five years (2021-22 to 2025-26). The work done certificate should be obtained duly signed from an Officer not below the rank of Executive Engineer 1. Earth work (Excavation and Embankment Quantity): 5180.00 Cum 2. Raising main of PVC pipe of 160 mm dia (8 Kg per Sqcm) - 7084.00 Mtr

Work Done Certificate

Capabilities of Vendor

List of Existing Commitments and ongoing works in all departments

Others -- List of Existing Commitments and ongoing works in all departments

Section 3 Qualification Information as per bid document

Others -- Section 3 Qualification Information as per bid document

Tenderers who meet the specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx1.5-B), Where A is Maximum value of civil engineering works executed in any one year during the last five years i.e.2021-22 to 2025-26 (updated to 2026-27 price level) taking into account the completed as well as works in progress. N is Number of years (0.5 years) prescribed for completion of the works for which tenders are invited. B is Value, at 2026-27 price level, of existing commitments and ongoing works to be completed during the next 0.5 years (06 Calendar months) Note: The statements showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.

Others -- BID CAPACITY

Financial Status

Liquid assets and /or availability of credit facilities of no less than Rs. 63.87 Lakhs (Credit lines/ letter of credit/ certificates from banks) for meeting the fund requirement etc.

Line of Credit

Achieved in at least two financial years during last 5 years (i.e., 2021-22 to 2025-26) Minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 234.52 Lakhs should not be less than Two times the Estimated Annual Payments under this contract. Financial turnover of previous years will be given a weightage of 10% per year to bring them to price level of FY 2026-27.

Audited CA Certificate of Annual Turnover

Others

A copy of valid KPWD Class III and above registration certificate of individual bidder should be uploaded

Others -- KPWD Class III and above registration certificate

Fee & Financial Details

Tender Fee Amount

₹2,940

EMD Fee Amount

₹2 L

Important Dates

Last Activity

30 Jun 2026

Published

30 Jun 2026

Bid Opening

9 Jul 2026

Download Ends

6 Jul 2026

Pre-Bid Meeting

4 Jul 2026

BOQ Preview

•

1st month

•

Supply and delivery of 10 HP, size 80x65 Head 34.50M, Discharge 840 LPM centrifugal pumpset at site brand new best make and with discharge duty confirming to ISI standards and its latest amendments with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply and delivery at site brand new best make starter/ control panel suitable for 7.5-10 HP centrifugal pump confirming with ISI mark and its latest amendments with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply, delivery, erection and commissioning at site lighting distribution board suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at the location of respective pump sets with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing up to 4Cx50 Sqmm Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply, delivery, erection and commissioning at site ELCB suitable for monoblock centrifugal pump confirming with ISI mark and its latest amendments with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Labour charges for providing connection using 3½ x 16 sqmm insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments from KPTCL pole to meter board unit, with all necessary materials ,tools and equipments,as per specificationswith testing with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply and delivery at site Brand new best make 1x3x6 Sqm PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as per specification, with testing with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well caps, cable clips and water tight gland cable protectors, bolts, nuts, valve and gauges,tools and equipments etc., involved in the job as per specifications, with necessary tests as per specifications, with testing with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of salt and charcoal 150mm around the pipe to complete depth. The connection from the pipe to the conduits etc. is to established through GI wire of sizes as per clause 7.3.3 of IS 732 using 12mm bolts, nuts, washers and check nuts, the pipe shall have 16 through holes of 12mm dia with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Refilling available earth around trenches/ pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing, laying and fixing of light Duty 100 mm dia GI pipes conforming to IS 1239: 1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, and commissioning with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply and delivery at site wrought middle steel (galvanized) 100 mm dia GI bend confirming to IS 1239-II, 1991 with latest amendments if any with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply and delivery at site wrought middle steel (galvanized) 100 mm dia GI union confirming to IS 1239-II, 1991 with latest amendments if any with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply and delivery at site of brand new best make 80 mm non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing and fixing 80 mm dia kinetic air valve of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845/ EN 1074-4. Body and bonnet of DI conforming to IS-1865 of grade GGG-40/50, seals are made of approved EPDM, SS 304 float, guide and internals. Flange drilling according to IS-1538 with appurtenances complete. Body and bonnet shall be coated with electrostatically applied epoxy powder coating with a coating thickness of 250 micron both inside and outside etc. complete For K Air Valves of 80mm dia with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing and fixing DI Resilient seated soft sealing PN10.0 and 80 mm sluice valve of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/ 50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendments only. The stem sealing should be with toroidal sealing rings (minimum 2 "O" rings). Body and bonnet should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, TP set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. For PN-10: (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate) with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply and delivery at site GM (copper alloy) 80 mm dia gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554/ 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing casing embankment using semi-pervious/ pervious approved soil from borrow areas in layers of 250 to 300 mm (before compaction) including cost of all materials, machinery, labour, all other operations such as collection of soil, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/ sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using power roller and all other ancillary operations with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing and laying in position cement concrete mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing size stone masonry with hard stone in foundation & plinth with cement mortar 1:6 (1 cement: 6 coarse sand) with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing and laying in position cement concrete mix 1:2:4 using 20 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing 20 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 Mtr With Wall thickness 65mm with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Erection and positioning of RCC Hume pipe pump house/ Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

HT Line: Supplying and erection of PSCC Pole-8 Mtr Long, 200 Kg WL including digging of pit, transportation of pole etc. complete (Dwg No. BESCOM/ GM/ QS&S/02 Dtd 24.11.2018) as per IS-785 with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing & fixing of 11 kV, Horizontal Cross Arm-Mild Steel (MS) (Dwg No. BESCOM/ GM/ QS&S/ 04 Dtd 24.11.2018) with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply and fixing at site guy set with 2-No. of No. 15 strain insulator & concreting material galvanized steel wire with turn buckle and anchoring with all accessories with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing 11 kV Ceramic Pin Insulator (Shell Only) with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing DISC Insulator 45 kN Porcelain with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing 11 kV GI Pin for 11 kV Ceramic Shell Insulator with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing and stringing of Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt: 214 Kg/Km with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply of Caution/ Danger Board with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply of GI barbed wire (12 mtr/ Kg) with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Double pole TC set for erection of transformer on RCC/ PSCC 9-m long poles as per IS 1977 for 100/300 kVA 4/5 star rated transformer with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Digging of Pit 1.8 Mtr depth in ordinary soil with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing 8 SWG GI Wire (4.064 mm Dia), Std Wt: 131 Kg/ Km with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing 7/10 SWG Guy Wire (7/3.251 mm Dia), Std Wt: 680 Kg/ Km with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing Earthing including GI Grounding pipe, B-Class, 42 mm dia, 2.5 m long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg including cost of charcoal and salt packed in 30 & 50 Kg gunny bags respectively with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing & fixing of 1.1 KV Class HR (Heat Resistant) 120 sqmm PVC Insulated & unsheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010 with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Wiring for lighting/power circuit using one of FRLS PVC insulted 1.1 kV grade multi strand copper with low conductor resistance 2.5 Sqmm single core wire in open are concealed system of wiring with specified IS-694-1990 and conform into GTP of group A with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing LT protection kit as per Dwg No. BESCOM/GM/QS&S/10 Dtd 24.11.2018 with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing 11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018) with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply of 11 kV, 200 amps single break GOS as per Dwg No. BESCOM/ GM/ QS&S/ 23 dt: 24.11.2018) with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing 100 kVA aluminium wdg, 4-star rated 3-phase 11 KV/ 433V distribution transformer-stacked CRGO core with oil with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

LT Metering Box for housing the ETV Meter without CT's busbar wiring etc. with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

SMC metering box as above With CT Ratio 150/5 for 100 kVA DTC with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

LT Line: Supplying and erection of PSCC Pole-8 Mtr Long, 200 Kg WL including digging of pit, transportation of pole etc. complete (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supplying and erection of RCC Pole-8 Mtr Long, 115 Kg WL including digging of pit, transportation of pole etc. complete (Dwg No. BESCOM/GM/QS&S/02 Dtd 24.11.2018) as per IS-785 with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply and delivery at site MS LT-4 pin cross arms with clamps, bolts, nuts & washers with braces with all accessories with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing 1.1 kV Ceramic Pin Insulator (Shell Only) with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing 1.1 kV GI Pin for 11 kV Ceramic Shell Insulator with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Providing No. 8 strain insulator with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Supply and stringing Weasel ACSR conductors with 1.5% sag with all accessories with all leads and lifts, etc. complete and as per the direction of the Engineer-in-charge.

•

Total

•

Cumulative Milestone

•

The liquidated damages

•

For Milestone 1:

•

For Milestone 2:

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

AFZALPUR TOWN drawings.pdf

Tender Document • 1.14 MB

Detailed_Specification.doc

Others - SPECIFICATION • 0.75 MB

MS-AFZAL-305.xlsx

Others - MILESTONE • 0.03 MB

Bid_Document_Pipeline Afzalpur 11638.doc

Others - BID DOCUMENT • 20.70 MB

Ready to Participate?

Download all tender documents and submit your bid