PROVISION FOR ILLUMINATION AT MADAN MOHAN TEMPLE VRINDAVAN DISTT MATHURA

Amount

SITC of high quality long through mono color wash light, Protection Rating : IP66, complying to BIS standard IS 10322 (Part 5/Sec 1): 2012, and having CE certification against standard EN 61547: 2009, EN 60598-1:2015, and EN 61347-2-13:2014 Mounting Structure : Additional wall mount yoke arrangements for fixing the lights. Rotation view : Inbuilt body rotating angle in degrees for uniform rotation angle to get the desired effect. Power consumption : 120-150W, CCT : 2700-3000K, (as per the design approval) Beam Angle Narrow/medium/wide (as per site requirement), Control : ON/OFF, Body : Die casted / extruded aluminum, Hot spot and light distribution : Optics Designed to minimize hot spots. Power Input : DC12/24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement) Glare : Specially designed glare free round shape 360 deg / 3 unit. Focusing area/LED will be kept 90 Deg perpendicular below the glare free optic. Size of the LED optic & glare unit must be equal or +/-2% higher to achieve the maximum intensity and less glare. This additional arrangement can be fixed or removed on the application. Glare free optical design for human viewing angle from a distance within 2-3 Mtr. Toughened transparent glass sealed above the glare free unit. Painting : 7 tank processed chemical treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total protection class of IP 66 & IK07 . Luminaire is inclusive of Integral male/female waterproof connectors , driver, accessories for fixing ( nut , bolt , clamps etc ) with structures in pre wired conditions as per IS. Light testing standard should be LM79, LED Driver, IP66 or higher, IK05 or higher etc. (Rate Including GST).

SITC of high quality long throw mono color wash light, Protection Rating : IP65, complying to BIS standard IS 10322 (Part 5/Sec 1): 2012, and having CE certification against standard EN 61547: 2009, EN 60598-1:2015, and EN 61347-2-13:2014 Mounting Structure : Additional wall mount yoke arrangements for fixing the lights. Rotation view : Inbuilt body rotating angle in degrees for uniform rotation angle to get the desired effect. Power consumption : 100-110W, CCT : 2700K-3000K, (as per the design approval) Beam Angle Narrow/medium/wide (as per site requirement), Control : Manual/ON/OFF, Channel : 1 CH, Body : Die casted / extruded aluminum, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : AC 110-230V, 50Hz or DC12/24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement) Glare : Specially designed glare free round shape 360 deg / 3 unit. Focusing area/LED will be kept 90 Deg perpendicular below the glare free optic. Size of the LED optic & glare unit must be equal or +/-2% higher to achieve the maximum intensity and less glare. This additional arrangement can be fixed or removed on the application. Glare free optical design for human viewing angle from a distance within 2-3 Mtr. Toughened transparent glass sealed above the glare free unit. Painting : 7 tank processed chemical treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total protection class of IP 65 &IK07. Luminaire is inclusive of Integral male/female waterproof connectors , driver, accessories for fixing ( nut , bolt , clamps etc ) with structures in pre wired conditions as per IS. Light testing standard should be LM79, LED Driver, IP65 or higher, IK05 or higher etc. (Rate Including GST).

SITC of high quality long through mono color wash light, Protection Rating : IP65 & IK07, complying to BIS standard IS 10322 (Part 5/Sec 1): 2012, and having CE certification against standard EN 61547: 2009, EN 60598-1:2015, and EN 61347-2-13:2014 Mounting Structure : Additional wall mount yoke arrangements for fixing the lights. Rotation view : Inbuilt body rotating angle in degrees for uniform rotation angle to get the desired effect. Power consumption : 50-60W, CCT : 2700K-3000K, (as per the design approval) Beam Angle 25º/45º/60º, Control : Manual/ON/OFF, Channel : 1 CH, Body : Die casted / extruded aluminum, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : AC 110-230V, 50Hz or DC12/24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement) Glare : Specially designed glare free round shape 360 deg / 3 unit. Focusing area/LED will be kept 90 Deg perpendicular below the glare free optic. Size of the LED optic & glare unit must be equal or +/-2% higher to achieve the maximum intensity and less glare. This additional arrangement can be fixed or removed on the application. Glare free optical design for human viewing angle from a distance within 2-3 Mtr. Toughened transparent glass sealed above the glare free unit. Painting : 7 tank processed chemical treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total protection class of IP 65 & IK07 . Luminaire is inclusive of Integral male/female waterproof connectors , driver, accessories for fixing ( nut , bolt , clamps etc ) with structures in pre wired conditions as per IS. Light testing standard should be LM79, LED Driver, IP65 or higher, IK05 or higher etc. (Rate Including GST).

SITC of high quality long throw mono color linear wash light, Protection Rating : IP65, complying to BIS standard IS 10322 (Part 5/Sec 1): 2012, and having CE certification against standard EN 61547: 2009, EN 60598-1:2015, and EN 61347-2-13:2014 Mounting Structure : Additional wall mount yoke arrangements for fixing the lights. Rotation view : Inbuilt body rotating angle in degrees for uniform rotation angle to get the desired effect. Power consumption : 40-60W, CCT : 2700-3000K, (as per the design approval) Beam Angle Narrow/medium/wide (as per site requirement), Control : Manual/ON/OFF, Channel : 1 CH, Body : Die casted / extruded aluminum, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : AC 110-230V, 50Hz or DC12/24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement) Glare : Specially designed glare free round shape 360 deg / 3 unit. Focusing area/LED will be kept 90 Deg perpendicular below the glare free optic. Size of the LED optic & glare unit must be equal or +/-2% higher to achieve the maximum intensity and less glare. This additional arrangement can be fixed or removed on the application. Glare free optical design for human viewing angle from a distance within 2- 3 Mtr. Toughened transparent glass sealed above the glare free unit. Painting : 7 tank processed chemical treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C , lifetime should be at least 50,000 burning hours at L70 at 25 degree centigrade with total protection class of IP 65 & IK07. Luminaire is inclusive of Integral male/female waterproof connectors , driver, accessories for fixing ( nut , bolt , clamps etc ) with structures in pre wired conditions as per IS. Light testing standard should be LM79, LED Driver, IP65 or higher, IK05 or higher etc. (Rate Including GST).

SITC of Neon Flex, 15-20W/M, 3000K, IP66 & IK07, DC24V. Neon Flex, Silicon material-Much more flexible, Efficient heat dissipation, Smooth plane lighting surface ,Perfect resealing with silicone glue. Resistant UV, Flame, Salt, Chlorine. Top Bending (Diameter 180mm). with suitable aluminum fixing clips/channels for mounting. (Rate Including GST).

SITC of Outdoor featured customized step light with housing of Pre cast Concrete Cement Body or Terracotta Sandblast / Grey Finish Coating and Luminaire Wattage 5-8W, Well designed thermal management system with aluminium heat sink Operating Voltage of AC 165-270V 50HZ with universal electronic driver, Light colour should be iny range of 2700-4000K, Mean rated service life L70(tq 25 °C) = 50,000 h.Ingress protection rating (DIN EN 60529): IP65,The luminaire should be provided with Electrical safety class I. Operating Temperature 0 deg to +50 deg , minimum hight shuld be approximate 300 mm. (Rate Including GST).

SITC of DC power driver for the above Lights, Power : 200W, Input : AC 110-240V AC, 50Hz, Output : DC 12/24V, Protection rating, IP65, Surge protection : LL 4KV, LE 6KV). (Rate Including GST).

Supply of PVC insulated multi core electrical armored flexible 4C x 16Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands aluminum conductors and it supports voltage grade up to 1100V. (As per actual depending upon the site condition). (Rate Including GST).

Laying and installation of PVC insulated multi core electrical armored flexible 4C x 16Sq mm power cable having less electrical losses. (As per actual depending upon the site condition). (Rate Including GST).

Supply of PVC insulated multi core electrical un armored flexible 4C x 2.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V. (As per actual depending upon the site condition)

Laying and installation of PVC insulated multi core electrical un armored flexible 4C x 2.5Sq mm power cable having less electrical losses. (As per actual depending upon the site condition). (Rate Including GST).

SITC of MS poles for fixing the high power LED façade wash/spot lights with the height 9- 12 Meter as per design/Site condition along with necessary clamping arrangements. ( Note - dia 76mmx 3.2mm A class, base plate is welded to pole dia 140mm x 4.5mm B class with 4 nos. mounting holes. Integral connector block for loop out is flushed in bottom section of the pole . The contractor shall submit the design of the pole and colour provided by the manufacturer to Engineer in charge for approval and design may very as per the site condition.) (Rate Including GST).

Supply and installation of stone fitment with special adhesive for luminare installation. ( Use 40 mm thick red sand stone 4.50 sqft in 1 no. ). (Rate Including GST).

SITC of IP65 "T" power connectors easy and extremely precise locking system. High impact materials - long- lasting and reliable. (Rate Including GST).

SITC of IP65 "I" power connectors easy and extremely precise locking system. High impact materials - long- lasting and reliable. (Rate Including GST).

SITC of earthen with galvanized iron earth plate, Eathing pipe, GI earthling wire, complete with all materials, testing and recording the result as per specification no EA-EP(9- 1-1)(2018-2019). (Rate Including GST).

SITC of customized waterproof power junction box/power cable terminal box, IP65 made up of rugged, non- corrosive, high impact polycarbonate, molded nylon encases connectors that use screw compression to secure the wires, protection against water jets and dust from all directions, with bus bar and MCB 10A. (Rate Including GST).

SITC of Power Distribution Electrical panel having a Incomer of 32A. Floor mount / rack mount / wall mount. Miniature circuit breakers of single poles shall be fixed of different ratings from 6/10/16/25A as per the lighting fixtures. Wiring inside the module for power, control protection and instrument etc. shall be done with use of 1100 V confirming to IS 694 and IS 8130 All welding slag grounded off and welding pits wiped smooth with plumber metal. Power panels shall be designed in such a way that the internal space is sufficient for hot air movement, and the electrical component does not attain temperature more than 40 degree Celsius. Fabricated panel shall be supported with ms angles of size 25mm x 25mm with an 1.8mm thickness sheet to hold the structure. Individual MCB control for 12 outgoing circuits. (Rate Including GST).

SITC of Power Distribution Electrical panel having a Individual MCB control for 12 outgoing circuits Made up of MS Sheet metal fabricated housing Black powder coated Ivory connectors for the internal terminations and external outgoing connecting points, Fiber / brass glands of suitable size fitted MCB control for outgoing circuits. Custom built as per specification and project requirement. (Rate Including GST).

Supplying and laying 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete for both power and Dmx. (As per actual depending upon the site condition). (Rate Including GST).

Supply, laying clamping and installation. 25mm PVC / FRPP Conduits.(As per actuals depending upon the site condition). (Rate Including GST).

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1- 19)(2018-19). (Rate Including GST).

Providing and laying in position cement concrete of grade 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth level [M3]. (Rate Including GST).

SITC of metallic Protective cage (Jali) for Protection for lights. (Use 1 cage approximate 10.40 sqft. ). (Rate Including GST).

Excavation work by manual means in foundation trenches (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. (Rate Including GST).

SITC of MS Fabricated IP 65 driver Box having IP67 glands for incoming and outgoing power connections as per the project requirement. Wall mounting arrangements with the clamps. Easy of driver mounting, termination having fixing arrangements and door with rubber gasket & locking system (Lot). (Rate Including GST).

Comprehensive Operation and Maintenance works charges from Item No. 1 to 26) for 5 years ( Operation & Maintenance and defect liability Charges for 1st year from the date of testing and commissioning of the project@0%, Operation & Maintenance and defect liability Charges for 2nd year from the date of expiring the first year warranty period, after testing and commissioning of the project@1%, Operation & Maintenance and defect liability Charges for 3rd & 4rth year from the date expiring the second & thiird year warranty [email protected]%, Operation & Maintenance and defect liability Charges for 5th year from the date expiring the fourth year warranty period@2%).(Rate Including GST).

Leksa Lighting Technologies Private Limited

Fluid and Power Automations LLP