Pump sets at Kanakalapeta water works, Yanam

Amount

31.250.1H Supplying of electrically operated wet type submersible motor and pumpset (Texmo/ KSB/ Taro / Kirloskar make), AC 3 phase, 415 volts, 50 Hz, 2900-3000 RPM. The pump shall have brass impeller, high grade steel shaft with sufficient stages having outlet size of 2"/2.5"/3" dia. to suit the borewell (150/200mm dia.), complete. The rate includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The pumpset shall be guaranteed for a period of one year from the date of commissioning. (15 HP Submersible motor and pumpset).

31.256.1C Supplying and fixing of fully automatic air break star-delta starter range for 13A to 25A F.A.S.D. (Bharat Culter Hammer/ L&T/ Siemens make) with suitable M.S. angle frame etc., complete.- 20HP to 25HP pumpsets -(ML-1.5).

15.53.2 Dismantling of C.I.sluice valve including stacking of useful material within a lead of 50 metres - above 150mm diameter.

31.48.4E Providing and fixing C.I. sluice valve (PN 1.6) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 200 mm dia.

31.251.1C Supplying of electrically operated, single stage high speed, centrifugal monoblock with volute type delivery pumpset (Texmo/KSB/Taro/ Kirloskar) make, AC 3 phase, 415V, 50 HZ, 2900 - 3000 RPM. The pump shell have C.I. impeller, high grade steel shaft having (100mm x 100mm) suction and delivery respectively including stainer / foot valveto pump the water from UGR to OHT. The rate includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The pumpset shall be guaranteed for a period of one year from the date of commissioning (10 HP Monoblock centrifugal motor and pumpset).

31.251.1A Supplying of electrically operated, single stage high speed, centrifugal monoblock with volute type delivery pumpset (Texmo/ KSB/ Taro/ Kirloskar) make, AC 3 phase, 415V, 50 HZ, 2900 - 3000 RPM. The pump shell have C.I. impeller, high grade steel shaft having (100mm x 100mm) suction and delivery respectively including stainer / foot valve to pump the water from UGR toOHT. The rate includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The pumpset shall be guaranteed for a period of one year from the date of commissioning.(5 HP Monoblock centrifugal motor and pumpset).

31.256.1A Supplying and fixing of fully automatic air break star-delta starter range for 5A to 13A F.A.S.D. (Bharat Culter Hammer/L&T/Siemens make) with suitable M.S. angle frame etc., complete.- 5HP to 12.5 HP pumpsets.

31.144.1I Providing and fixing in position G.I. bend (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked, including labour charges for jointing,jointing materials etc,complete - 100 mm dia.

31.172.1D Providing and fixing in position UPVC moulded tail piece without flange (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 110mm dia.

31.161.1F Providing, laying and jointing UPVC pipes (Finolex / jain / Supreme / Truebore /Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends,tees, threaded pieces,couplers, reducer,endcaps etc.,complete all as per IS and CPWD specification. - 110mm dia.

31.153.1E Providing and fixing mild steel flange including bolts,nuts, rubber insertion, labour charges etc, complete-100mm dia.

31.48.11D Providing and fixing C.I. swing type single door Foot valve conforming to IS 4038 and ISI marked, with bolts, nuts, rubber insertion etc., complete- 100mm dia.

31.172.1H Providing and fixing in position UPVC moulded tail piece without flange (Finolex / jain) (0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 200mm dia.

31.153.1G Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc,complete-150mm dia.

31.47.5 Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc.,complete - 200mm diameter pipe.

31.131.1B Providing and fixing Cast iron flanges conforming to IS specification 1538 and ISI marked. - 100 mm dia.

31.131.2B Threading of CI / DI pipes suitable for fixing flanges including transportation, labour charges etc., complete - 100 mm dia.

18.35.1 Constructing masonry chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1cement : 4 coarse sand) for sluice valve, with C.I.surface box 100mm top diameter, 160mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick , finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

10.20 Providing and fixing bolts including nuts and washers complete.

Basic Code No. 1372F Supply and fixing of 200mm dia (Rubber insertion for flanged pippe joints) etc., complete as directed by the Engineer-in-charge.