Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC NO 107 KUMARAN COLONY VOC NAGAR EAST V M CHATHIRAM TIRUNELVELI 627011 | TIRUNELVELI | TIRUNELVELI | TAMIL NADU | 627011 | ₹8.7 L | L1 | Accepted-AOC Response |
| 2 | L2₹8.8 LRejected-AOC NO 5 34B MARAVAR STREET THARUVAI TIRUNELVELI 627356 | TIRUNELVELI | TIRUNELVELI | TAMIL NADU | 627356 | ₹8.8 L | L2 | Rejected-AOC Non-Response |
| 3 | L3₹8.9 LRejected-AOC NO 2 2A1 ST THOMAS ROAD MAHARAJANAGAR PALAYAMKOTTAI TIRUNELVELI 627011 | TIRUNELVELI | TIRUNELVELI | TAMIL NADU | 627011 | ₹8.9 L | L3 | Rejected-AOC Non-Response |
| Sl No | Description | Qty | Unit | C.SELVAKUMAR L3 | SUBRAMANIAN GURUSANKAR L2 | M DHANAPAUL L1 |
|---|---|---|---|---|---|---|
| 1.00 | Dismantling of Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs including cost and conveyence etc., complete as per standard specification | 86 | m2 | 63 ₹5,418 | 65.56 ₹5,638.16 | 65 ₹5,590 |
| 2.00 | Plain cement concrete of mix 1:4:8 using 40mm ISS metal from the apporoved quarry including cost and convence of the materials to site and all the labour charges etc, complete as per the standard specification | 9 | m3 | 5,506 ₹49,554 | 5,443 ₹48,987 | 5,400 ₹48,600 |
| 3.00 | Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992
for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. | 1 | m3 | 6,261 ₹6,261 | 6,467.72 ₹6,467.72 | 7,000 ₹7,000 |
| 4.00 | Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification. | 100 | m2 | 277 ₹27,700 | 289.25 ₹28,925 | 280 ₹28,000 |
| 5.00 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m | 426 | m2 | 266 ₹1.1 L | 275.15 ₹1.2 L | 250 ₹1.1 L |
| 6.00 | Painting two coats with ready mixed approved paint over New steel surface including cost and conveyance all materials etc. complete | 25 | m2 | 142 ₹3,550 | 143 ₹3,575 | 300 ₹7,500 |
| 7.00 | Paving the floor with best quality vitrified Tiles of Double Charged/ Nano polished/Other type 800x800x10mm size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) | 80 | m2 | 1,510 ₹1.2 L | 1,462.8 ₹1.2 L | 1,475 ₹1.2 L |
| 8.00 | Flooring with ceramic tiles of size 305 x 305 x 6mm size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) | 11 | m2 | 1,114 ₹12,254 | 1,159.95 ₹12,759.45 | 1,100 ₹12,100 |
| 9.00 | Dadooing walls with white glazed tiles of size150mm x 150mm x 6mm best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) | 11 | m2 | 1,509 ₹16,599 | 1,561 ₹17,171 | 1,500 ₹16,500 |
| 10.00 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. | 7 | m3 | 3,872 ₹27,104 | 4,036 ₹28,252 | 3,900 ₹27,300 |
Tender Value
₹9.4 L
EMD Value
₹9,400
Closing Date
16 Dec 2025, 3:00 pmClosed
COMMISSIONER TIRUNELVELI
1 Sn High Road Tirunelveli Municipal Corporation
Renovation work for Collection Centre at Perumalpuram Area in ward No. 42
2025_MAWS_631046_3
44/2025-26
Open Tender
Civil Works
1 Sn High Road Tirunelveli Municipal Corporation
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹9,400
4 Jun 2026
11 Dec 2025
16 Dec 2025
11 Dec 2025
16 Dec 2025
11 Dec 2025
Dismantling of Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs including cost and conveyence etc., complete as per standard specification
Plain cement concrete of mix 1:4:8 using 40mm ISS metal from the apporoved quarry including cost and convence of the materials to site and all the labour charges etc, complete as per the standard specification
Brick work in following Cement Mortar using best quality Burnt Clay Brick of size 8 3/4” x 4 1/4” x 2 3/4” with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.
Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification.
Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m
Painting two coats with ready mixed approved paint over New steel surface including cost and conveyance all materials etc. complete
Paving the floor with best quality vitrified Tiles of Double Charged/ Nano polished/Other type 800x800x10mm size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Flooring with ceramic tiles of size 305 x 305 x 6mm size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Dadooing walls with white glazed tiles of size150mm x 150mm x 6mm best approved quality, white / colour glazed tiles conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Finishing the top of roof with one course of machine pressed tiles of 200mm x 200mm x 16mm to 18mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Supplying and fixing fine polished cuddapah slab of 38 / 40mm thickness for cup- board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers
UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and itshould not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc
Supplying and fixing in position best approved of BIS quality 110mm dia PVC Pipe for One Floor PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of neceSORy PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers
Supplying and following pipes and specials
3/4" HDPE Hose pipe
1/2" HDPE hose pipe
25mm PVC Pipe
25mm PVC Coupling
25mm PVC TEE
25mm PVC Elbow
25mm PVC BEND
25mm PVC END CAP
32mm PVC Pipe
32mm PVC Coupling
32mm PVC TEE
32mm PVC Elbow
32mm PVC BEND
32mm PVC END CAP
15mm CP Tab
32mm G.M. Gate Valve
Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 22)
Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box inflush with wall with 3mm thick hylem sheet cover for 5A 3pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point (SD 37)
Wiring with 2x4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box inflush with wall with 3mm thick hylem sheet cover for 15A 3pin non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4 sq.mm copper wire for open PVC power plug point (SD 39)
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with tube. (SD 89)
Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") (SD 106)
Supply and Installation of 1.5 TR Split Type AC Unit - 5 Star Rated AIR-CONDITIONER WITH COPPER COIL including all labour cost and conveyence etc., complete
Supply and Installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay including all labour cost and conveyence etc., complete
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_754715.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
BOQ_754715.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid