Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC | L1 | Accepted-AOC Reasonable lowest tenderer | |
| 2 | L2₹18.0 L+₹33,211 (1.88%)Rejected-Finance COURT ROAD SURATGARH 335804 | SURATGARH | SRI GANGANAGAR | RAJASTHAN | 335804 | L2 | Rejected-Finance Not Lowest tenderer | |
| 3 | L3₹20.0 L+₹2.3 L (13.0%)Rejected-Finance | L3 | Rejected-Finance Not Lowest tenderer | |
| 4 | L4₹20.5 L+₹2.9 L (16.1%)Rejected-Finance VIAH ROAD TEH GHATT FEROZEPUR PIN 152001 PB | FIROZEPUR | PUNJAB | 152001 | L4 | Rejected-Finance Not Lowest tenderer |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
27 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (East) Ferozepur Cantt
GE (East) Ferozepur Cantt
Certain repairs to roof, plaster, ceiIling, joinery and other B/R work in (OTM Accn) of various units under AGE B/R-II of GE (East) Ferozepur Cantt
2023_MES_626174_1
8154/GE/E/FZR/23-24/E8
Open Tender
Civil Works
Item Rate
180 days
GE (East) Ferozepur Cantt
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
Yes
GE (East) Ferozepur Cantt
₹50,000
Yes
18 Jan 2024
1 Nov 2023
29 Nov 2023
1 Nov 2023
27 Nov 2023
14 Nov 2023
Amount
M&LGlazed ceramic coloured tiles in vertical surfaces 200x300x7mm/300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces including dismantling of wall tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified & directed
M&L Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.06 Sqm but nexc 0.11 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) including dismantling of floor tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed
M&L Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) including dismentling of floor tiling with cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed
Demolition of un-reinforced cement concrete in any position complete all as specified and directed
M&L for Cement concrete type D-2, 1:4:8 in foundations, filling and mass-concrete complete all as specified &directed
M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded crushed stone agg.as in floor finished complete all as specified and directed
Taking down cement plaster & rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint on walls incl preparation of new surfaces complete all as specified and directed
Taking down cement plaster & rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement and applying two coats of white lime wash (white washing) incl preparation of new surfaces on walls complete all as specified and directed
Demolition of brick work built in cement mortar of any specification and in any position complete all as specified.
M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.
All as per item 10 here-in-before but using old bricks retrieved from item no. 9 including cleaning and removal of mortar from old bricks etc complete all as specified and directed
M&L rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair & even and applying two coats of cement based paint on walls incl preparation of new surfaces complete all as specified and directed
Taking down cement plaster on ceiling surfaces & rendering 5 mm thick in cement mortar (1:3) finished even & smooth without using extra cement and applying two coats of white wash incl preparation of surfaces complete all as specified and directed
Taking down chowkhats or frames exc 1.50 Sqm but n .exc 4 Sqm each, removing to or from store, including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,or otherwise as directed complete all as specified and directed
Taking down wooden shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each and refixing in same opening after easing adjusting, complete all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm but n.exc 4 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified.
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat forfixing etc complete all as specified and directed
S&F Anodised aluminium window and ventilator shutters with powder coating of any colour (Thickness or powder coating not less than 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F Anodised aluminium door shutters with powder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed
S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint ccomplete all as specified and directed
S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (125X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete all as specified and directed
M&L for PCC (1:3:6) type C-1 using 20 mm graded stone agg .as in filling steel frames etc including necessary form work complete all as specified and directed
Material and labour for PCC (1:2:4) type B1 with using 20 mm graded stone agg as in bed block hold fast block complete all as specified and directed
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each or otherwise as directed complete all as specified.
S&F 35 mm thick, 2nd class hard wood, plain framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with comercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-II complete all as specified.
S&F 35 mm thick,2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed
S&F 200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and directed
S&F 150 mm mild steel pressed handles, oval type stove enamelled black complete all as specified and directed
S&F for 300 mm Mild Steel sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed
S&F 300mm, Mild steel ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed
M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts or otherwise as directed complete all as specified.
S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 of MES Schedule Part-II (2020).
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2020) complete all as specified.
S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified.
S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified.
S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified.
S&F factory made box type steel window with glazed and mesh shutters with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle two shutters without glazing bars and two shutters with glazing bars dovetailed or welded and with framed guard bars with one shop coat of zinc chromate primer complete all as specified.
S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each complete all as specified.
S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm in each including hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, complete all as specified.
S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed
S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed
M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint including one coat of red oxide primer complete all as specified and directed
M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over already primed surface complete all as specified and directed
Resecuring or easing & adjusting, without taking down of shutters of any description of exc. 1 Sqm but n.exc. 2 Sqm each complete all as specified & directed.
M&L Granite (of any type) work 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of Stone slabs and tiles of any description laid bedded and pointed in any mortar complete all as specified & directed.
Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified.
Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified and directed.
M & L for 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete all as specified and directed.
M&L 15 mm thick screed bed or bedding layer of mortar in CM(1:6) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface and Supply & fixing Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m bitumen and laid on roof, complete all as specified and directed. Note: WPC shall be measured and paid separately
S & F 40 mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by weight complete all as specified and directed.
All as item No 52 above but except tiles complete all as specified and directed.
Demolition of unreinforced cement concrete of any description and in and position not otherwise specially provided for or as in Sunken & roof kerbs complete all as specified
M&L Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate in foundations, filling and mass concrete, as in filling under sunken floor portion complete all as specified.
M&L for Rendering/plastering, 10 mm thick in cement mortar (1:3) on concrete surfaces of sunken floor and applying bitumen blown any grade applied two coats to concrete surface / rendering at the rate of 1.5 kg per sqm per coat and treating the sunken floor complete all as specified and directed
M&L APP modified polymeric membrane with mineral finish on top min 3 mm thick & weighing n. less than 3.5kgs/sqm with mineral reinforced with polyster non-woven fabric(wt n.less than 150gm/m2) laid over cold bituminous primer by torch application method with min overlap of 75mm on longitudinal direction & 100m in the transverse direction complete all as specified and directed
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation,complete all as specified and directed
Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed
S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed
S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floorscomplete all as specified and directed
Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified and directed
Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittingscomplete all as specified and directed
S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified and directed
S&F PVC flush pipe/Bend pipe 32 mm dia for low level flushing cistern including re fixing of cistern at its position complete all as specified and as directed.
S&F in repair Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary cement concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified and directed
S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed
S&F in Repair Viterous China bowl urinal flat back, size of 465 x 355 x 265 mm white (miniumum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing aroiund urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipee. (Exclusive of fixing supply pipe to flushing cistern, flushing cistern, trap and waste pipe) complete all as specified and directed
S&F in repair 15 mm bore Bib tap cast copper alloy chomium plated with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule. complete all as specified and directed
S&F in repairs 15 mm pillar taps, cast copper alloy, with capastan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed
S&F in repair stop cock standard 15 mm cast copper alloy cromium plate screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed
S&F in repair 20 mm gun metal,globe or gate valve, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed
S&F in repair brass Chromium plated shower rose of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed
S&F in repair 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20 mm PTMT stop valve screwed for iron pipe all as specified in SSR Part-I complete all as specified.
S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, 20 mm PTMT stop valve screwed for iron pipe all as specified in SSR Part-I complete all as specified.
S&F in repairs 20 mm ball valve, high pressure, of PTMT with epoxy coated aluminium rod and high density plastic ball,screwed for iron pipe ( min wt 142 gms) complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed
Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or fixed to floor including distance pieces complete all as specified and directed
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes as complete all as specified and directed
S&F 110 mm borePVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed
S&F 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed
S&F 75 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed
S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and directed.
S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed
S&F PVC (SWR) 75 mm, floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
Supply only integral water proofing compound (ISI Marked) complete all as specified.
M/s S B Construction Company
PREM KUMAR BANSAL
M/s Sarup Singh
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .