Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹47.7 L
EMD Value
₹95,400
Closing Date
27 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE AF THANE
Office of Military Engineer Services ,Garrison Engineer (AF) Thane, Kolshet Road, Sandoz Baugh Post, Thane 400607
PROVN OF CONCRETE PERIMETER PATH FOR PATROLLING AND CERTAIN SANCTIONED WORKS AT AF STN MUMBAI UNDER GE (AF) THANE
2026_MES_792836_1
GE (AF) T-55 OF 2026-27 (8663)
Open Tender
Civil Works
Item Rate
180 days
THANE
AS PER NOTICE OF TENDER
8 documents required · 8 mandatory
₹500
GE AF THANE
₹95,400
Yes
8 Oct 2026
8 Oct 2026
3 Nov 2026
8 Oct 2026
27 Oct 2026
22 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed by Engineer-in-charge. | 1,254.6 | Sqm | - | - |
| 2 | Excavation in trenches n exc 1.5m wide & n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed by Engineer-in-charge. | 127.39 | Cum | - | - |
| 3 | Excavating over areas, n exc 1.5 m deep and getting out hard/dense soil complete all as specified and directed by Engineer-in-charge. | 150 | Cum | - | - |
| 4 | Material & labour for rolling and consolidation of formation of surfaces in cutting with power roller of 8 to 12 tonne capacity power roller including filling up depression which occur during rolling complete all as specified and directed by Engineer-in-charge. | 139.15 | 10 Sqm | - | - |
| 5 | Material & labour fo Soling (or sub base) with broken boulders or quarried stone interstices filled of size 63mm to 100mm, surfaces formed and rolled and consolidated to required gradient and camber spread thickness 200mm in single layer complete all as specified and directed by Engineer-in-charge. | 135 | 10 Sqm | - | - |
| 6 | Removing excavated material exc. 250 m but n exc 500m and depositing where directed complete all as specified and directed by Engineer-in-charge. | 270 | Cum | - | - |
| 7 | M&L hardcore of broken stone or boulders gauge exc 63 mm but n exc. 100 mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surfacecomplete all as specified and directed by Engineer-in-charge. | 135 | Cum | - | - |
| 8 | M&L for 100mm thick plain cement concrete nominal mix type D2 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engineer-in-charge. | 1,350 | Sqm | - | - |
| 9 | Supply and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved clour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould laid in required colour & pattern over nand including 50mm thick compacted bed of fine sand, compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer through vibratory copmpaction by using plate vibrator, filling the joints with sand and cutting of paver block as per requirred size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engineer-in-charge. | 1,080 | Sqm | - | - |
| 10 | Supply and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved clour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould laid in required colour & pattern over nand including 50mm thick compacted bed of fine sand, compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer through vibratory copmpaction by using plate vibrator, filling the joints with sand and cutting of paver block as per requirred size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engineer-in-charge. | 270 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.36 MB
TD8663.pdf
Tender Documents • 2.02 MB
BOQ_889054.xls
BOQ • 0.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .