Repair, painting and polishing of wooden / steel furniture at Aurangabad and Mil Stn Bhusawal under GE (South) Ahmednagar

Amount

Works to be executed at AGE Aurangabad

Removing of userviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia , medium grade ISI marked weight not less than 450 Grams of each directed.

Removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as directed .

Removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked including cutting, threaing at both ends and fixing all as directed .

Converting the unserviceable long rail obtained from item No 3.00 above in to two short rail including cutting threading at both ends and fixing all as directed.

Removing of unserviceable short rails of GI Charpoy and converting the same in to two legs including cutting, threding at one end fixing all as directed.

Removing of existing wornout newar of GI charpoy and reweaving the same with new 50/55mm wide nylon newar of vergin quality weighting not less than 1.50 Kg per charpy after tightening the loose components including provn of 3mm thick 50mm dia MS circular plate welded to the legs all as directed. Note : Reweaving shall be closely done on both side. FD-220

Removing of unserviceable nylon newar from charpoy GI pipe, S&F commercial plywood of size 1980mm x 900mmx12mm thick BWR grade making with 06 Nos nut with bolt of 6mm dia 60mm long to be used for fixing of plywood top including drilling holes and following arrangement completed all as specified as directed by Engr-in-charge (a) S&F 3 Nos 25mm square MS hollow tube 16 guage wall thickness of length not less than 83.6cms each welded with fillet weld all around 3mm thick to long rails of GI pipe Charpoy at equal space to support plywood all as directed Note : (i) All steel sections except GI articles and adjoining surfaces of GI pipe which shall be degalvanised during welding of MS hollow pipe shall be painted with two coats of synthetic enamel paint black over coat of red oxide primer. (ii) All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. (iii) The top of bolt (Head) for fixing of plywood shall be flushed with ply top & finished with suitable fitting. (iv) Legs of the charpoy to be welded with 3mm thick 50mm dia MS circular plate duly painted with two coats of synthetic enamel paint black over coat of red oxide primer.

M&L for removing unserviceable Square tube from Table dining ORs, Table clerk steel and Table office officer steel and S&F new square tube all as per directed by Engineer-in-charge

M&L for removing unserviceable top from Table Dining ORS and S&F new Top made out of 18/19mm Particle Board incl cover of 22 mm Guage alumn sheet as per specification shown on drawing and as directed by Engineer-in-charge.

M&L for removing unserviceable wooden parts from chair wooden bottom and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete.

Rear legs

Front legs

Front/side rails

Stiffners

M&L for removing unserviceable wooden parts from chair dining and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete.

Rear legs

Front legs

Rear/front/side rails

Stiffners

Back rest

M&L for removing unserviceable wooden parts from chair writing and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete.

Rear legs

Front legs

Rear/front/side rails/including cane hole

Stiffners

Back rest

Arms rest

M&L for removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete.

Rear legs

Front/rear/rails including cane holes

Side rails for seat including cane holes

Front /rear/stiffeners

Side rails for back rest including cane hole

Upper /lower rails for back rest including cane

Arms rest

M&L for removing unserviceable plastic cane from chairs , Bin soil linen and stool dressing and recanning with 2 MM wide and canning boarder 3/4 wide cane (Make of cane Komal)

M&L for removing unserviceable wooden parts from chair easy and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete

Legs for table dining 6/8 pers

Front/rear rails of table dining 6/8 pers

Side rails for table dining 6/8 pers

Centre rails of table dining 6/8 persons

Leg of table 3'x2' without with drawer

Front/rear rails of table 3'x2' without with drawers

Side rails of table 3'x2' without with drawers

Drawers of Table 3'x2'

Front /rear top/bottom rails of table writing

Legs of table writing

Stiffeners of table writing

Side rails of table writing

Legs of table centre

Front/rear rails of table centre

Stiffeners of table centre

Bottom rails for table centre

Legs of table 2' x 2'

Front/rear/side rail of table 2 x 2

Leg of table 3 x 3

Front/rear/side rails of table 3 x 3

Legs of Table dining 4x3

Side rails of Table dining 4x3

Legs of peg table

Bottom rail of peg table

Top rail of peg table

Leg of teapoy

Top rail of teapoy

Bottom rail of teapoy

M&L for removing unserviceable wooden parts from sofa set and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete

Legs of sofa chairs 70 x 35 x 30MM

Arms rest of sofa chairs 70X35X725MM

Wooden bearer 40X40X670MM

Wooden batten 50X20X670MM

Wooden rails 35X100X670MM

Wooden frame for head 70X35X600MM

Wooden rails to support back frame 30X50X670MM

Wooden bearer 40X40X1730MM

Wooden rail 35X100X1730MM

Wooden frame for back 70X35X1660MM

M&L for removing unserviceable wooden parts from Bed hard and supply and fix new wooden parts made out of Ist class hard wood teak(MP) free from knots,cracks etc with permissible moisture contents, timber components of size and shape including applying french polishing to required gloss complete

Short rails of bed hard

Long rails of bed hard

Stiffners of bed hard

Front leg of bed hard

Rear legs of bed hard

M&L for removing old unserviceable head rest from the bed hard/bed newar as per specification shown in the drg and as directed by Engr-in-charge

M&L for removing old unserviceable foot rest from the bed hard/bed newar as per specification shown in the drg and as directed by Engr-in-charge

CHAIR SCHOOL WITH HAND BOARD -

M&L for replacement of hand board of chair school of Make Godrej all as specified and shown on drg FD/E6/MAP/5

M&L for replacement of Seat of chair school Make Godrej all as specified and shown on drg FD/E6/MAP/5

(c) M&L for preparation frame of school with hand board wherever required shall be welded and scrapping cleaning of frame of chair school with hand board broken/damaged & painting with one coat of paint enamel synthetic black in colour all specified and directed by Engineer-in-charge FD/E6/MAP/5

M&L for removing of unserviceable plywood from bed hard and S&F new ply wood 12MM thick commercial

M&L for removing unserviceable drawer from the table dressing gents and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drg and applying french polish as reqd as per directed by Engr-in-charge

M&L for removing unserviceable top frame of table dressing gents and S&F new top frame to the existing table dressing gents and applying french polish as reqd as per specification given in drg

M&L for removing unserviceable looking mirrior with frame from the table dressing Gents and S&F new mirrior with frame to the existing table dressing gents with mirror and applying french polish as reqd of as per specification given in drg.

M&L for removing unserviceable Knob from table dressing gents and S&F new Knob of approved quality and as directed.

M&L for removing unserviceable drawer from the table dressing ladies and S&F new drawer made out of 19/18mm thick prelaminated particle board as per drg and as directed by Engr-in-charge

M&L for removing unserviceable top frame of table dressing ladies and S&F new top frame to the existing table dressing ladies duly french polished as reqd or as per specification given in drawing

M&L for removing frame with Mirror of the table dressing ladies and S&F new frame with Mirror to the existing table dressing ladies duly french polisedh wherever required.

M&L for removing unserviceable back base ply from table dressing ladies with mirror and S&F new back base ply to the existing Table dressing ladies with mirror duly french polished as reqd. Make of mirror Modiguard

M&L for removing broken unserviceable sliding glass shutter and alumn channel and S&F new glass shutter and alumn channel to the existing table dressing ladies

M&L for removing unserviceable back from Side Board and S&F new 6mm thick plywood commercial of same size duly french polished as reqd as per specification and as directed by Engr-in-charge

M&L for removing unserviceable drawers from Side Board and S&F new drawers made out of 12mm commercial plywood of same size and applying french polish as reqd as directed by Engr-in-charge

M&L for removing unserviceable door shutter from Side Board and S&F new door shutter of 18/19mm thick prelaminated particle board one side teak face and other side white teak wood beading all around all as specified and as per drg.

M&L for removing unserviceable Knob from Side board and S&F new knob with suitable screw as directed by Engr-in-charge

M&L for removing unserviceable top from side board and S&F new top of size 19/18mm thick prelaminated particle board one side teak face and other side white all as per drg

M&L for removing unserviceable legs from table dressing ladies and S&F new legs made out of 1st class hard wood Indian teak wood duly french polished as reqd as per specification and as directed by Engr-in-charge.

Material and labour for spot welding of steel furniture items of broken joints etc, not exceeding 2.5cm in length and thickness 6mm including scraping, preparing the surface of welded portion by grinding and buffing to make fit for painting and applying two coats of synthetic enamel paint over a coat of red oxide on welded portion by sprayer complete . Make of paint shall be Apcolite by Asian paints

M&L for removing the unserviceable tops from the following tables and S&F new tops made out of 18/19mm MDF board, one side teak finish and other side balancing white and fixing the same with the existing tables with suitable screw incl beading all around to the tops duly french polished as specified and directed by Engr-in-Charge :- (a) Table writing

Table writing

Table centre

Top for teapoy verandah

Table 600X600 MM

Table 3X3

Table dining 4'x3'

Table peg

Teapoy

Table dining 6 persons

Table dining 8 person

Table 3X2 without & with drawer

M&L for removing unserviceable Hasp and staple 75mm chromium plated and fixing to steel shutter and locker bed side steel with suitable rivet/nut and bolt screw all as specificied and shown on drawings

M&L for removing unserviceable unserviceable Handle from locker bedside & providing new CP handle 100mm and fixing with suitable screw /bolt to shutter of locker bedside steel all as specificied and shown on drawings

M&L for removing unserviceable hinges from locker bedside and S&F new hinges with suitable welding to locker bed side steel all as specificied and shown on drawings

M&L for removing unserviceable legs from locker bed side and S&F new legs made out of 1.00 mm thick black sheet and fixing to locker bedside steel with suitable welding the legs shall be painted with one coat of red oxide primer and two coats of synthetic enameled paint with match the existing all as specificied and shown on drawings

M&L for removing unserviceable shutter of locker bedside and S&F new shutter to locker bedside steel and painted with two coats of red match with existing paint as shown on drawing.

M&L for removing unserviceable conduit pipe and S&F new 20mm mild steel conduit pipe with socket to locker bedsidesteel all as specificied and shown on drawings

M&L for removing unserviceable handle from Almirah Large Steel with shelves and providing new handle for Almirah large steel and Almirah med steel with shelves as per specification and shown on drawing

M&L for removing unserviceable locking device of Almirah large steel with shelves and Almirah med with shelves and providing new locking device including cover as per specification and shown on drawing and for directed Engr-in-charge

M&L for removing unserviceable lock from Almirah large steel with shelves and S&F new Godrej or equivalent lock with duplicate key all as specified and shown on drawing and as directed by Engr-in-charge

M&L for removing unserviceable shelves from Almira large steel with shelves and S&F new shelves for Almirah large steel with shelves made out of 1.00mm thik black sheet as per specified and shown on drawing as directed by Engr-in-charge

M&L for removing unserviceable legs from Almirah large steel with shelves and Almirah med steel with shelves and S&F new legs made out 0f 1.00MM thick black sheet as specified and shown on drawing and as directed by Engr-in-charge

M&L for removing unserviceable clips and providing new clips to shelves of Almirah large steel with shelves and med steel with shelves as specified and shown on drawing and as directed by Engr-in-charge

M&L for removing unserviceable locks from table office clerk and table office officer steel and S&F new locks to table clerk steel and table office officer steel

M&L for removing unserviceable hand rest from chair CB steel with arms and S&F new hand rest made out of 1st class hard wood Indian teak wood to the existing chairs CB steel with arms as specified and directed

M&L for removing unserviceable seat & back from chair CB steel with arms and supply and fix new seat and back for chair CB steel with arms duly painted for following :-

Seat of chair CB steel with arms

Back of chair CB steel with arms

M&L for removing unserviceable seat & back from chair CB steel without arms and supply and fix new seat and back for chair CB steel without arms duly painted for following :-

Seat of chair CB steel W/O arms

Back of chair CB steel W/O arms

M&L for removing old unserviceable seat from chair CBA spl and S&F new seat made out of 1st class hard wood Indian teak wood duly canned with 2MM plastic cane to the existing and as directed

M&L for removing old unserviceable back of chair CBA spl and S&F new back of chair made out of 1st class hard wood Indian teak wood dulycanned with 2 MM plasticcane to the existing and directed .

M&L for removing unserviceable seat and back in one piece made out of PVC and S&F with suitable nut bolt/screw to the existing PVC seat & back in one piece (Make- Supreme/Cello/Polyset or Blowplast and as directed

M&L for removing unserviceable prelaminated MDF board top 18mm thick openable and S&F with suitable hinged & screw on right hand side to 25mm mild steel pipe inserted in 20mm dia rod welded to frame

M&L for removing unserviceable hand rest from chair CBA spl with hand rest made out of 1st class hard wood Indian teak wood as per size shown on drawing duly polished as specified and directed by Engr-in- charge

M&L for removing unserviceable plastic cane from chair verandah and recanning with 4/5mm half round plastic cane good quality including painting of chair verandah.Make of Apcolite by Asian paints high glossy.

M&L for removing unserviceable planks from form without back and S&F new plank made out of 1” class Indian teak wood to the existing form without back as per specification given in drawing

M&L for removing unserviceable Seat/Back from sofa set to seat five,four and three and S&F 100MM thick cushion of 32 density foam duly covered & stiched.Note- Tapestry cloth shall be of Bombay Dyeing /Raymond furnishing /"D" Décor , colour of cloth will be approved by GE,Make of foam Sleepwell/Curlon

M&L for removing unserviceable tapestry cloth from the existing sofa foam cushion and S&F new cushion cover out of good quality tapestry coth rate not less than Rs 250/= per mtrs and as per sample approved by GE including provn of Zib at one side of cover rest all as specified in drawing , Make D Decore/Raymonds/Bombay Dying

M&L for removing unserviceable foam cushion foam leather from seat of chair easy cushioned with arms and S&F new cushioned seat made by good fibre foam leather and fixing to the existing chair easy with applying french polishing as reqd.

M&L for removing unserviceable foam cushion foam leather from back of chair easy cushioned with arms and S&F new cushioned back made by good fibre foam leather and fixing to the existing chair easy with applying french polishing as reqd.

M&L for removing unserviceable foam cushion foam leather from back of chair CB steel with arms arms and S&F new cushioned back made by good fibre foam leather and fixing with the existing chair steel with arms duly painted as reqd or as per specifications and directed by Engr-in-Charge.

M&L for removing unserviceable foam cushion foam leather from seat of chair CB steel with arms arms and S&F new cushioned seat made by good fibre foam leather and fixing with the existing chair steel with arms duly painted as reqd or as per specifications and directed by Engr-in-Charge.

M&L for removing unserviceable frame from square tube form without back and S&F new square tube wherever required to existing form without back with suitable welding all as shown on drawing

M&L labour for painting to the frame of form without back with one coat of synthetic enmal paint black to existing form without back all as per specification and shown on drawing

M&L for removing dent and bends of following steel furniture articles and applying two coats of synthetic enamel paint over a coat of red oxide primer by sprayer complete.

Almirah large steel with shelves

Almirah med/small with shelves

Locker bed side steel

Table with drawer steel

Table office clerk steel

Table office officer steel

Table dining ORs

Chair CB steel with arms

Chair CB steel without arms

Chair verandah steel with white paint

Chair CBA special

M&L for removing existing polish of following wooden furniture and applying melamine by Asian Paints /Nerolac/Berger paints strictly as per manufactures instructions.Note:-Colour of polish will be approved by GE

Book shelf open small

Book shelf open large

Bed hard with ply top

Chair WB without arms

Chair writing

Chair dining

Chair easy

Sofa set 4 seater

Sofa set 5 seater

Table centre

Table peg

Table dining 6 person

Teapoy

Table bed side

Table dressing Gents with mirror

Table dressing ladies with mirror

Table writing

Table dining 8 pers

Bin soil linen

Side Board

Stool dressing CB

Table card

Works to be executed at AGE Bhusawal

Removing of userviceable 3 way elbow of GI charpoy and supply and fix new 3 way elbow 32mm dia , medium grade ISI marked weight not less than 450 Grams of each directed.

Removing unserviceable check nut of GI charpoy and supply and fix new check nut 32mm dia all as directed .

Removing of unserviceable long rail of GI charpoy and supply and fix new long rail 32mm medium grade, ISI marked Make TATA / Jindal / Swastik / Zenith including cutting, threaing at both ends and fixing all as directed .

Converting the unserviceable long rail obtained from item No 3.00 above in to two short rail including cutting threading at both ends and fixing all as directed.

Removing of unserviceable short rails of GI Charpoy and converting the same in to two legs including cutting, threding at one end fixing all as directed.

Removing of existing wornout newar of GI charpoy and reweaving the same with new 50/55mm wide nylon newar of vergin quality weighting not less than 1.50 Kg per charpy after tightening the loose components including provn of 3mm thick 50mm dia MS circular plate welded to the legs all as directed. Note : Reweaving shall be closely done on both side. FD-220

Removing of old unserviceable Locks of Almirah Large Steel &Med steel and S & F new locks 6 leaver with duplicate keys.

Removing of old unserviceable and S&F new cupboard locks of modular tables and side boardsh duplicate keys.

Removing of old unserviceable Handle of Almirah Large steel and Med steel and S & F new steel handle CP with bolts ISI marks all as per drg and directed

Removing of old and unserviceable Locking rod of Almirah Large steel and S & F new Locking MS rod all as per drg and directed

Removing of old unserviceable Shutter of Almirah Large steel and S & F new shetter MS 1mm all as per drg and directed

Removing of old unserviceable Shelves of Almirah large steel and S & F new Shelf MS 1 mm thick all as per drg and directed

Removing of old unserviceable Locking rod of Almirah Med steel and S & F new Locking MS rod all as per drg and directed

Removing of old unserviceable Shelves of Almirah Med steel and S & F new Shelf MS 1 mm thick all as per drg and directed

Removing of old unserviceable Shutter of Almirah Med steel and S & F new shetter MS 1mm all as per drg and directed.

Removing of old unserviceable Legs of Almirah Med steel and S & F new legs made out of 20G MS sheet all as per drg and directed.

S & F Shelves supporting clips for steel almirah with require Nos of screw etc all as per drg and directed.

Removing of old unserviceable Shutter of Locker bed side steel and S & F new shutter MS 1 mm thick all as per drg and directed.

Removing of old unserviceable Shelves of Locker bed side steel and S & F new Shelf MS 1 mm thick all as per drg and directed.

M & L for removing existing u/s drawers from table office officer & table office clerk, S&F new drawer from 1mm thick MS steel duly painted with olive green synthetic enamele paint over a coat of primer and as specified and directed.

Removing of old unserviceable top of Table office clerk steel , and S&F new 'top' made out of prelaminated particle board exterior grade 18 mm thick make-nove pan/eco board and 6 mm thick teak wood beading shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed

Removing existing unserviceable cane from seats of Chair Writing and supply & caning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern) all as specified and directed

Removing existing unserviceable cane from seats of dining Chair and supply & caning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern) all as specified and directed

Removing existing unserviceable front legs of dining Chair and supply & fixing legs of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable side rail of dining Chair and supply & fixing side rail of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable rear legs of dining Chair and supply & fixing legs of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable cane from seats and back of Easy Chair and supply & caning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern ) all as specified and directed

Removing existing unserviceable front legs of Chair easy and supply & fixing legs of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable Rear legs of Chair easy and supply & fixing legs of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable Hand rest/arms of Chair easy and supply & fixing legs of first class teak wood duly polishing all as specified and directed

Removing existing unserviceable seat frame back rail of Chair easy and supply & fixing new seat frame back rail of first class teak wood duly polishing and holded for canning and supply & caning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern ) all as specified and directedall as specified and directed

Removing of old unserviceable Drawer of Table Dressing Ladies and S & F new Drawer of 6mm plywood and 18mm prelaminated particle board all as specified and shown on drg.

Removing of old unserviceable back ply of Table Dressing Ladies and S & F new ply 6mm thick , ISI Mark all as specified and shown on drg.

Removing of old unserviceable mirror of Table Dressing Ladies and S & F new mirror 5mm thick of size all as specified and shown on drg.

Removing of old unserviceable legs of Table Dressing Ladies and made out new legs of 1st class teak wood all as specified and shown on drg.

Removing of old unserviceable top of Table Dressing Gents and S & F new Top with 12mm perilaminated partical board all as specified and shown on drg.

Removing of old unserviceable Drawer of Table Dressing Gents and S & F new Drawer of 6mm plywood and 18mm prelaminated particle board all as specified and shown on drg.

Removing of old unserviceable back ply of Table Dressing Gents and S & F new ply 6mm thick a, ISI Mark all as specified and shown on drg.

Removing of old unserviceable mirror of Table Dressing Gents and S & F new mirror 5mm thick of size all as specified and shown on drg.

Removing of old unserviceable bottom ply wood of Table Dressing Gents and replacement of 8mm thick plywood all as specified and shown on drg.

Removing existing unserviceable cane from seats of Chair Office CB and chair Office CBA and supply & caning with 2 mm wide white colour cane plastic in Godrej pattern (Honey comb pattern) all as specified and directed

M& L for removing existing u/s knobs from drawers of table dressing ladies,table dressing Gents, table writing ,Table 3'x2' ,side boards etc and S&F new knobs 40mm dia all as specified & as directed.

Removing of old unserviceable Top of locker bed side and S & F Top shall be thick of 18mm thik prelaminated partical board exterior grade, ISI Mark Make-Novapan/Ecoboard all as specified and shown on drg.

All as per Item above but bottom,and all legs fixed at the bottom

All as per Item above but front door complete

Removing of old unserviceable leg of locker bed side and S & F leg of teak wood

Removing of old & unserviceable Hasp & staple of locker bed side and S & F new Hasp & staple 75mm ISI Mark all as per drg and directed

Removing of old & unserviceable ply from back side of locker bed side and S&F new ply 6mm thik ISI mark make-Kitply/National all as specified and shown on drg

M&L for for two coats of spray painting with first quality paint of approved color on both inside and outsideof locker, after cleaning by sand paper and over a cote of primer

Removing of old unserviceable piano hinges for locker and fixing new steel approved quality piano hinges all as specified and shown on drg

M&L for for two coats of spray painting with first quality paint of approved color on stool 2' Hight, after cleaning by sand paper and over a cote of primer

Removing of damage plywood top of Bed hard Modern furniture moulded and supply and fix new 12 mm thick with commercial plywood ISI Mark all as per drawing.

Removing of damage plywood top of Bed plywood top and supply and fix new 12 mm thick with commercial plywood ISI Mark all as per drawing fixed with 08 Nos screws.

Removing of damaged bottom support of bed plywood top and supply and fix Teak Wood bottom support for bed plywood top duly polished with french polish,, all as specified directed.

Removing of damaged long rails of bed plywood top and supply and fix long rails for bed plywood top of first class teak wood duly polished with french polish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of damaged legs of bed plywood top and supply and fixnew legs of first class teak wood duly polished with french ploish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of old unserviceable top of Teapoy Fd , and S&F new 600x450mm 'top' made out of prelaminated particle board exterior grade 18 mm thick make-nove pan/eco board and 6 mm thick teak wood beading shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed.

Removing of damaged legs of Teapoy and supply and fix new legs of first class teak wood duly polished with french ploish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of damaged side rail of Teapoy and supply and fix new side rail of first class teak wood duly polished with french ploish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of old unserviceable top of Peg Table 450x300mm , and S&F new 'top' made out of prelaminated particle board exterior grade 18 mm thick make-nove pan/eco board and 6 mm thick teak wood lipping shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed

Removing of damaged side rail of Peg Table and supply and fix new siderail of first class teak wood duly polished with french ploish, well seasoned free from crack, all as specified directed and shown on drg

Removing of damaged legs of Peg Table and supply and fix new legs of first class teak wood duly polished with french ploish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of old unserviceable top of Table Centre 900x450mm, and S&F new 'top' made out of prelaminated particle board exterior grade 18 mm thick make-nove pan/eco board and 6 mm thick teak wood beading shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed.

Removing of damaged legs of Table Centre and supply and fix new legs of first class teak wood duly polished with french ploish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of damaged side short rail of Table Centre and supply and fix new side short rail of first class teak wood duly polished with french polish, well seasoned free from crack, all as specified directed and shown on drg.

Removing of damaged side long rail of Table Centre and supply and fix new side long rail of first class teak wood duly polished with french ploish, well seasoned free from crack, all as specified directed and shown on drg.

Removing og old unserviceable legs of Table writing and supply and fixing led made of 1st class Teak wood all as specified shown on drg and as directed.

Removing of old unserviceable top of Table Writing, and S&F new 'top' made out of prelaminated particle board exterior grade 18 mm thick make-nove pan/eco board and 6 mm thick teak wood beading shall be provided all around of 'top' duly french polishing all as specified'showing on drg and as directed.

Removing of old unserviceable shutter of Table Writing, and S&F new shutter made out of prelaminated particle board exterior grade 18 mm thick make-nove pan/eco board all as specified showing on drg and as directed.

Removing of old unserviceable side of Table Writing, and S&F new side made out of prelaminated particle board exterior grade 18 mm thick make-novapan/eco board all as specified'showing on drg and as directed

Removing of old unserviceable legs of table dining 6/8 persons and S&F new legs made out of teak wood duly french polished all as specified and as shown on drg and as directod.

Removing of old unserviceable side long rail of table dining 6 persons and S&F newside long rail made out of 1st class teak wood duly french polished all as specified and as shown on drg and as directed.

Removing of old unserviceable top of table dining 6 persons, and S&F new 'top' size 1500x900 mm made out of pelaminated particle board exterior grade 18 mm thick make-nova pan/eco board and 4 mm thick teak wood lipping shall be provided all around of 'top' duly french polished all as specified and as shown on drg and as directed.

Removing of old unserviceable 'top of table dining 8 persons, and S&F new 'top' size 1800x900 mm made out of prelaminated particle board exterior grade 18 mm thick make-nove pan/eco board and 4 mm thick teak wood lipping shall be provided all around of 'top' duly french polishing all as specified and shown on drg and as directed.

Removing of old UNSV top of table dining ORs aluminium top and S&F new top made out of particle board exterior grade 18 mm thick and tightening with screw make novapan/Ecoboard & covering with 1mm thick aluminium sheet all as shown on drg and as directed.

Removing of existing UNSV rubber shoes of table dining ORs and S&F with hard PVC shoes as per existing shape and size all as specified,showing on drg and as directed.

Removing and replacement of cushions and tapestry cloth best quality not less than Rs 200/- per meter for seat ,back of Chair dining Moulded all as directed.

Removing and replacement of cushions and tapestry cloth best quality not less then Rs 200/- per meter for seat ,back of Chair revolving all as directed.

Removing of unserviceable components of hydraulic system and supply & fixing new hydraulic system in chair revolving all as directed.

Removing of old unserviceable wooden hand rest from chair tubular steel with arms and S & F of new hand rest made out of 1st class Teak wood, shape and size as shown on drg duly painted with two coat of black enamel synthetic paint over a coat of pink primer.

S & F cushion 21"x21"x4" covered with best quality tapestry cloth not be less than Rs 200/- per meter and provided with Zip for sofa as approved by EIC

Removing old unserviceable cushion seat and back and S&F new readymade 100mm thick 32 density cushion foam and covered with tapestry cloth(not less than Rs 250/- per meter) duly stitched make-feather foam or sleep well for set of sofa set 4 seater in two pieces 2+2) modular type including repair to laminations.

Removing old unserviceable cushion seat and back and S&F new readymade 100mm thick 32 density cushion foam (size of Seat of 3 seater 68"x24"x4" ,back of 3seater 68"x18"x4" seat of single seater 22"x24"x4" and back of single seater 22"x18"x4"), and covered with tapestry cloth(not less than Rs 250/- per meter) duly stitched make-feather foam or sleep well for set of sofa set 5 seater in three pieces 3+1+1) modular type including repair to laminations.

Removing old unserviceable legs of side board and replacement new legs made out of teak wood duly french polished all as specified and as directed

Removing old unserviceable side of side board and replacement new side of 18mm thick prelaminated particle board all as specified and as directed

Removing old unserviceable Top of side board and replacement new Top of 18mm thick prelaminated particle board all as specified and as directed

Removing old unserviceable shutters two nos of side board and replacement new shutter with 18mm thick prelaminated particle board fixed with piano hinges all as specified and as directed.

Removing old unserviceable back ply of Table bed side and replacement new 6mm ply wood commercial all as specified and as directed.

Removing old unserviceable sides of Table bed side and replacement new sides of 18mm thick prelaminated particle board all as specified and as directed.

Removing old unserviceable top of Table bed side and replacement new new Top of 18mm thick prelaminated particle board all as specified and as directed.

M & L for removing exiting u/s cane plastic from chair varandah painting with one coat of synthetic enamel white paint and recanning the same in mat pattern closely woven with 4mm wide white colour cane plastic.

M&L for spray painting with one coat synthetic enamel paint of following steel furniture including prepration of old painted surface all as specified and as directed.

(a) Almirah Large steel with Shelve

(b) Almirah large steel 1/2H 1/2 Shelve

(c) Almirah Med Steel

(d) Chair Varandah

(e) Locker Steel

(f) Rack Boot

(g) Rack steel 78"x36"x19"

(h) Rack steel 72"x36"x15"

(j) Table IT

(k) Table 1520x860x760 mm

(l) Table dining OR

(m) Form without Back

(n) Table office clerk

(o) Table office officer

Material and labour for polishing of furniture including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same with one coat of approved quality of french polish to glossy finish for the following items of furniture :-

(a) Chair easy

(b) Chair Dining

(c) Chair Writing

(e) Table Bed side

(f) Table dining 8 persons

(g) Bed Hard/Bed Newar

(h) Table 600x600x760mm

(k) Sofa set four seater

(l)Sofa set 5 seater in 3 pieces

(m) Table dining 6 pers

(n) Table writing

(o) Table 900x600 with/without drawers

(p) Table peg

(q) Teapoy

SARGAM ENTERPRISES

KAMINS CARE

Mahesh Traders

KASTURILAL HARICHAND OHRI AND SONS